ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 13:48:06 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
f4858a490e
openwrt/target/linux/qoriq/image/generic.mk

18 lines
715 B
Makefile
Raw Normal View History

qoriq: add support for WatchGuard Firebox M300 This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 23:41:11 +00:00
define Device/watchguard_firebox-m300
DEVICE_VENDOR := WatchGuard
DEVICE_MODEL := Firebox M300
qoriq: use FIT uImage for Firebox M300 kernel This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-04-26 15:21:11 +00:00
DEVICE_COMPAT_MESSAGE := \
Kernel switched to FIT uImage. Update U-Boot environment.
DEVICE_COMPAT_VERSION := 1.1
qoriq: add support for WatchGuard Firebox M300 This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 23:41:11 +00:00
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
DEVICE_PACKAGES := \
qoriq: define reset button for Firebox M300 This patch provides support for the Firebox M300 reset button. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2022-06-14 13:54:48 +00:00
kmod-gpio-button-hotplug kmod-hwmon-w83793 kmod-leds-gpio kmod-ptp-qoriq \
kmod-rtc-rs5c372a kmod-tpm-i2c-atmel
qoriq: use FIT uImage for Firebox M300 kernel This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-04-26 15:21:11 +00:00
KERNEL := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_SUFFIX := -fit-uImage.itb
qoriq: add support for WatchGuard Firebox M300 This device is based on NXP's QorIQ T2081QDS board, with a quad-core dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5 ethernet interfaces, of which 3 are connected to the ethernet ports on the front panel. The other 2 are internally connected to a Marvell 88E6171 switch; the other 5 ports of this switch are also connected to the ethernet ports on the front panel. Installation: write the sdcard image to an SD card. Stock U-Boot will not boot, wait for it to fail then run these commands: setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr' saveenv reset The default U-Boot boot entry will now boot OpenWrt from the SD card. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 23:41:11 +00:00
IMAGES := sdcard.img.gz sysupgrade.img.gz
IMAGE/sysupgrade.img.gz := sdcard-img | gzip | append-metadata
IMAGE/sdcard.img.gz := sdcard-img | gzip
endef
TARGET_DEVICES += watchguard_firebox-m300
Reference in New Issue Copy Permalink