openwrt/target/linux/brcm2708/patches-4.1/0090-i2c-bcm2708-BCM270X_DT-Add-support-for-I2C2.patch

From f40ed032e6f0892778bac7d33d45593c0483628b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 22 Jun 2015 14:23:03 +0100
Subject: [PATCH 090/121] i2c-bcm2708/BCM270X_DT: Add support for I2C2

The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
use of this bus can break an attached display - use with caution.

It is recommended to disable accesses by VideoCore by setting
hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.

The interface is disabled by default - enable using the
i2c2_iknowwhatimdoing DT parameter.
---
 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts |  6 ++++++
 arch/arm/boot/dts/bcm2708-rpi-b.dts      |  6 ++++++
 arch/arm/boot/dts/bcm2708-rpi-cm.dts     |  6 ++++++
 arch/arm/boot/dts/bcm2708_common.dtsi    | 14 ++++++++++++++
 arch/arm/boot/dts/bcm2709-rpi-2-b.dts    |  6 ++++++
 drivers/i2c/busses/i2c-bcm2708.c         |  5 ++++-
 6 files changed, 42 insertions(+), 1 deletion(-)

--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -75,6 +75,10 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
 &i2s {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -103,8 +107,10 @@
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
 		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
 		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
 		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
 		core_freq = <&clk_core>,"clock-frequency:0";
 
 		act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -75,6 +75,10 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
 &i2s {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -97,8 +101,10 @@
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
 		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
 		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
 		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
 		core_freq = <&clk_core>,"clock-frequency:0";
 
 		act_led_gpio = <&act_led>,"gpios:4";
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -65,6 +65,10 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
 &i2s {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -79,8 +83,10 @@
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
 		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
 		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
 		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
 		core_freq = <&clk_core>,"clock-frequency:0";
 	};
 };
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -20,6 +20,7 @@
 		uart1 = &uart1;
 		mmc = &mmc;
 		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		usb = &usb;
 		leds = &leds;
 		fb = &fb;
@@ -179,6 +180,19 @@
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
 			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			// Beware - this is shared with the HDMI module.
+			// Careless use may break (really) your display.
+			// Caveat emptor.
+			compatible = "brcm,bcm2708-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -75,6 +75,10 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
 &i2s {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -103,8 +107,10 @@
 		spi = <&spi0>,"status";
 		i2c0 = <&i2c0>,"status";
 		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
 		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
 		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
 		core_freq = <&clk_core>,"clock-frequency:0";
 
 		act_led_gpio = <&act_led>,"gpios:4";
--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -407,8 +407,11 @@ static int bcm2708_i2c_probe(struct plat
 	case 1:
 		adap->class = I2C_CLASS_DDC;
 		break;
+	case 2:
+		adap->class = I2C_CLASS_DDC;
+		break;
 	default:
-		dev_err(&pdev->dev, "can only bind to BSC 0 or 1\n");
+		dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n");
 		err = -ENXIO;
 		goto out_free_bi;
 	}