mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
391 lines
6.7 KiB
Plaintext
391 lines
6.7 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||
|
|
||
|
/dts-v1/;
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/input/input.h>
|
||
|
#include <dt-bindings/leds/common.h>
|
||
|
|
||
|
#include "mt7986a.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "TP-Link TL-XTR8488";
|
||
|
compatible = "tplink,tl-xtr8488", "mediatek,mt7986a";
|
||
|
|
||
|
aliases {
|
||
|
serial0 = &uart0;
|
||
|
label-mac-device = &gmac0;
|
||
|
led-boot = &led_status_green;
|
||
|
led-failsafe = &led_status_red;
|
||
|
led-running = &led_status_green;
|
||
|
led-upgrade = &led_status_red;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
bootargs = "root=/dev/fit0 rootwait";
|
||
|
rootdisk = <&ubi_rootdisk>;
|
||
|
stdout-path = "serial0:115200n8";
|
||
|
};
|
||
|
|
||
|
memory {
|
||
|
reg = <0 0x40000000 0 0x40000000>;
|
||
|
};
|
||
|
|
||
|
reg_3p3v: regulator-3p3v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-3.3V";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
reg_5v: regulator-5v {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "fixed-5V";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
keys {
|
||
|
compatible = "gpio-keys";
|
||
|
|
||
|
reset {
|
||
|
label = "reset";
|
||
|
linux,code = <KEY_RESTART>;
|
||
|
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
|
||
|
wps {
|
||
|
label = "wps";
|
||
|
linux,code = <KEY_WPS_BUTTON>;
|
||
|
gpios = <&pio 16 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
|
||
|
turbo {
|
||
|
label = "turbo";
|
||
|
linux,code = <BTN_1>;
|
||
|
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
compatible = "gpio-leds";
|
||
|
|
||
|
led_status_red: status-red {
|
||
|
color = <LED_COLOR_ID_RED>;
|
||
|
function = LED_FUNCTION_STATUS;
|
||
|
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
led_status_green: status-green {
|
||
|
color = <LED_COLOR_ID_GREEN>;
|
||
|
function = LED_FUNCTION_STATUS;
|
||
|
gpios = <&pio 8 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
turbo {
|
||
|
label = "green:turbo";
|
||
|
color = <LED_COLOR_ID_GREEN>;
|
||
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&crypto {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
ð {
|
||
|
status = "okay";
|
||
|
|
||
|
gmac0: mac@0 {
|
||
|
compatible = "mediatek,eth-mac";
|
||
|
reg = <0>;
|
||
|
phy-mode = "2500base-x";
|
||
|
|
||
|
nvmem-cells = <&macaddr_config_1c 0>;
|
||
|
nvmem-cell-names = "mac-address";
|
||
|
|
||
|
fixed-link {
|
||
|
speed = <2500>;
|
||
|
full-duplex;
|
||
|
pause;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gmac1: mac@1 {
|
||
|
compatible = "mediatek,eth-mac";
|
||
|
reg = <1>;
|
||
|
phy-handle = <&phy7>;
|
||
|
phy-mode = "2500base-x";
|
||
|
|
||
|
nvmem-cells = <&macaddr_config_1c 1>;
|
||
|
nvmem-cell-names = "mac-address";
|
||
|
};
|
||
|
|
||
|
mdio: mdio-bus {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&mdio {
|
||
|
phy5: phy@5 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c45";
|
||
|
reg = <5>;
|
||
|
realtek,aldps-enable;
|
||
|
};
|
||
|
|
||
|
phy7: phy@7 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c45";
|
||
|
reg = <7>;
|
||
|
realtek,aldps-enable;
|
||
|
};
|
||
|
|
||
|
switch: switch@1f {
|
||
|
compatible = "mediatek,mt7531";
|
||
|
reg = <31>;
|
||
|
reset-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <1>;
|
||
|
interrupt-parent = <&pio>;
|
||
|
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&switch {
|
||
|
ports {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
port@0 {
|
||
|
reg = <0>;
|
||
|
label = "lan1";
|
||
|
};
|
||
|
|
||
|
port@1 {
|
||
|
reg = <1>;
|
||
|
label = "lan2";
|
||
|
};
|
||
|
|
||
|
port@2 {
|
||
|
reg = <2>;
|
||
|
label = "lan3";
|
||
|
};
|
||
|
|
||
|
port@3 {
|
||
|
reg = <3>;
|
||
|
label = "lan4";
|
||
|
};
|
||
|
|
||
|
port@5 {
|
||
|
reg = <5>;
|
||
|
label = "lan5";
|
||
|
phy-handle = <&phy5>;
|
||
|
phy-mode = "2500base-x";
|
||
|
};
|
||
|
|
||
|
port@6 {
|
||
|
reg = <6>;
|
||
|
ethernet = <&gmac0>;
|
||
|
phy-mode = "2500base-x";
|
||
|
|
||
|
fixed-link {
|
||
|
speed = <2500>;
|
||
|
full-duplex;
|
||
|
pause;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&spi0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&spi_flash_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
flash@0 {
|
||
|
compatible = "spi-nand";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
reg = <0>;
|
||
|
|
||
|
spi-max-frequency = <20000000>;
|
||
|
spi-tx-bus-width = <4>;
|
||
|
spi-rx-bus-width = <4>;
|
||
|
|
||
|
partitions {
|
||
|
compatible = "fixed-partitions";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
partition@0 {
|
||
|
label = "bl2";
|
||
|
reg = <0x000000 0x0100000>;
|
||
|
read-only;
|
||
|
};
|
||
|
|
||
|
partition@100000 {
|
||
|
label = "config";
|
||
|
reg = <0x100000 0x0040000>;
|
||
|
read-only;
|
||
|
|
||
|
nvmem-layout {
|
||
|
compatible = "fixed-layout";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
macaddr_config_1c: macaddr@1c {
|
||
|
compatible = "mac-base";
|
||
|
reg = <0x1c 0x6>;
|
||
|
#nvmem-cell-cells = <1>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
partition@140000 {
|
||
|
label = "factory";
|
||
|
reg = <0x140000 0x0040000>;
|
||
|
read-only;
|
||
|
|
||
|
nvmem-layout {
|
||
|
compatible = "fixed-layout";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
eeprom_factory_0: eeprom@0 {
|
||
|
reg = <0x0 0x1000>;
|
||
|
};
|
||
|
|
||
|
eeprom_factory_1000: eeprom@1000 {
|
||
|
reg = <0x1000 0xe00>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
partition@180000 {
|
||
|
label = "reserved";
|
||
|
reg = <0x180000 0x0200000>;
|
||
|
read-only;
|
||
|
};
|
||
|
|
||
|
partition@380000 {
|
||
|
label = "fip";
|
||
|
reg = <0x380000 0x0200000>;
|
||
|
read-only;
|
||
|
};
|
||
|
|
||
|
partition@580000 {
|
||
|
compatible = "linux,ubi";
|
||
|
reg = <0x580000 0x7800000>;
|
||
|
label = "ubi";
|
||
|
|
||
|
volumes {
|
||
|
ubi_rootdisk: ubi-volume-fit {
|
||
|
volname = "fit";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pcie {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pcie_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
pcie@0,0 {
|
||
|
reg = <0x0000 0 0 0 0>;
|
||
|
|
||
|
wifi@0,0 {
|
||
|
compatible = "mediatek,mt76";
|
||
|
reg = <0x0000 0 0 0 0>;
|
||
|
ieee80211-freq-limit = <5470000 5875000>;
|
||
|
|
||
|
nvmem-cells = <&eeprom_factory_1000>, <&macaddr_config_1c 3>;
|
||
|
nvmem-cell-names = "eeprom", "mac-address";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pcie_phy {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pio {
|
||
|
pcie_pins: pcie-pins {
|
||
|
mux {
|
||
|
function = "pcie";
|
||
|
groups = "pcie_clk", "pcie_wake", "pcie_pereset";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
spi_flash_pins: spi-flash-pins {
|
||
|
mux {
|
||
|
function = "spi";
|
||
|
groups = "spi0", "spi0_wp_hold";
|
||
|
};
|
||
|
conf-pu {
|
||
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||
|
drive-strength = <8>;
|
||
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||
|
};
|
||
|
conf-pd {
|
||
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||
|
drive-strength = <8>;
|
||
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
||
|
};
|
||
|
};
|
||
|
|
||
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
||
|
mux {
|
||
|
function = "wifi";
|
||
|
groups = "wf_2g", "wf_5g";
|
||
|
};
|
||
|
conf {
|
||
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||
|
drive-strength = <4>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ssusb {
|
||
|
vusb33-supply = <®_3p3v>;
|
||
|
vbus-supply = <®_5v>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&trng {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_phy {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&watchdog {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&wifi {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
||
|
ieee80211-freq-limit = <2400000 2500000>, <5170000 5350000>;
|
||
|
nvmem-cells = <&eeprom_factory_0>, <&macaddr_config_1c 2>;
|
||
|
nvmem-cell-names = "eeprom", "mac-address";
|
||
|
status = "okay";
|
||
|
};
|