openwrt/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch

179 lines
5.4 KiB
Diff
Raw Normal View History

mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-07 21:10:02 +00:00
From 9818a7a4fd10f72537cdf2a5ec3402f2c245ea24 Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 30 Nov 2017 14:40:28 +0100
Subject: clk: mvebu: armada-37xx-periph: prepare cpu clk to be
used with DVFS
When DVFS will be enabled then the cpu clk will use a different set of
register at run time. That means that we won't be able to use the common
callback and need to use our own ones.
This patch prepares this change by switching on our own set of callbacks
without modifying the behavior of the clocks.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/mvebu/armada-37xx-periph.c | 82 ++++++++++++++++++++++++++++++----
1 file changed, 73 insertions(+), 9 deletions(-)
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -46,7 +46,17 @@ struct clk_double_div {
u8 shift2;
};
+struct clk_pm_cpu {
+ struct clk_hw hw;
+ void __iomem *reg_mux;
+ u8 shift_mux;
+ u32 mask_mux;
+ void __iomem *reg_div;
+ u8 shift_div;
+};
+
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
+#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
struct clk_periph_data {
const char *name;
@@ -55,6 +65,7 @@ struct clk_periph_data {
struct clk_hw *mux_hw;
struct clk_hw *rate_hw;
struct clk_hw *gate_hw;
+ struct clk_hw *muxrate_hw;
bool is_double_div;
};
@@ -81,6 +92,7 @@ static const struct clk_div_table clk_ta
};
static const struct clk_ops clk_double_div_ops;
+static const struct clk_ops clk_pm_cpu_ops;
#define PERIPH_GATE(_name, _bit) \
struct clk_gate gate_##_name = { \
@@ -122,6 +134,18 @@ struct clk_divider rate_##_name = { \
} \
};
+#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
+struct clk_pm_cpu muxrate_##_name = { \
+ .reg_mux = (void *)TBG_SEL, \
+ .mask_mux = 3, \
+ .shift_mux = _shift1, \
+ .reg_div = (void *)_reg, \
+ .shift_div = _shift2, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_pm_cpu_ops, \
+ } \
+};
+
#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
@@ -136,10 +160,6 @@ static PERIPH_DIV(_name, _reg, _shift1,
static PERIPH_GATE(_name, _bit); \
static PERIPH_DIV(_name, _reg, _shift, _table);
-#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \
-static PERIPH_MUX(_name, _shift); \
-static PERIPH_DIV(_name, _reg, _shift_div, _table);
-
#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
@@ -180,13 +200,12 @@ static PERIPH_DOUBLEDIV(_name, _reg1, _r
.rate_hw = &rate_##_name.hw, \
}
-#define REF_CLK_MUX_DIV(_name) \
+#define REF_CLK_PM_CPU(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
- .mux_hw = &mux_##_name.hw, \
- .rate_hw = &rate_##_name.hw, \
+ .muxrate_hw = &muxrate_##_name.hw, \
}
#define REF_CLK_MUX_DD(_name) \
@@ -216,7 +235,7 @@ PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV
PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
-PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
+static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
static struct clk_periph_data data_nb[] = {
REF_CLK_FULL_DD(mmc),
@@ -235,7 +254,7 @@ static struct clk_periph_data data_nb[]
REF_CLK_FULL(trace),
REF_CLK_FULL(counter),
REF_CLK_FULL_DD(eip97),
- REF_CLK_MUX_DIV(cpu),
+ REF_CLK_PM_CPU(cpu),
{ },
};
@@ -297,6 +316,37 @@ static const struct clk_ops clk_double_d
.recalc_rate = clk_double_div_recalc_rate,
};
+static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
+{
+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+ int num_parents = clk_hw_get_num_parents(hw);
+ u32 val;
+
+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
+ val &= pm_cpu->mask_mux;
+
+ if (val >= num_parents)
+ return -EINVAL;
+
+ return val;
+}
+
+static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+ unsigned int div;
+
+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
+
+ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+}
+
+static const struct clk_ops clk_pm_cpu_ops = {
+ .get_parent = clk_pm_cpu_get_parent,
+ .recalc_rate = clk_pm_cpu_recalc_rate,
+};
+
static const struct of_device_id armada_3700_periph_clock_of_match[] = {
{ .compatible = "marvell,armada-3700-periph-clock-nb",
.data = data_nb, },
@@ -356,6 +406,20 @@ static int armada_3700_add_composite_clk
}
}
+ if (data->muxrate_hw) {
+ struct clk_pm_cpu *pmcpu_clk;
+ struct clk_hw *muxrate_hw = data->muxrate_hw;
+
+ pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
+ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
+ pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
+
+ mux_hw = muxrate_hw;
+ rate_hw = muxrate_hw;
+ mux_ops = muxrate_hw->init->ops;
+ rate_ops = muxrate_hw->init->ops;
+ }
+
*hw = clk_hw_register_composite(dev, data->name, data->parent_names,
data->num_parents, mux_hw,
mux_ops, rate_hw, rate_ops,