ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 15:56:49 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
f2a40e1117
openwrt/target/linux/mpc85xx/p2020/config-default

45 lines
1011 B
Plaintext
Raw Normal View History

mpc85xx: p2020: kernel: enable CONFIG_BLK_DEV_NVME Enables use of NVMe storage devices with appropriate adapter in miniPCIe slots (including for boot) in Turris 1.x routers and possibly NXP P2020RDB boards (these are the only currently supported p2020 devices according to docs[^1]). Proper detection, mountability and readability was proved to be working on Turris 1.1, OpenWrt 21.02 with similar configuration. Increases gzip compressed kernel size by approximately 37 KiB (from 3 703 KiB to 3 740 KiB). Should boot from those devices be possible the driver needs to be built in. Inclusion as a module would prevent this functionality. CONFIG_BLK_DEV_NVME=y Includes NVMe driver in the kernel.[^2] CONFIG_NVME_CORE=y Selected by CONFIG_BLK_DEV_NVME.[^3] Not necessarily needed to be enabled explicitly, but included to match the form of similar functionality implementations for mvebu, x86_64 and rockchip_armv8 targets. CONFIG_NVME_MULTIPATH disabled explicitly to prevent using more space than necessary. [^1]: https://openwrt.org/docs/techref/targets/mpc85xx [^2]: https://cateee.net/lkddb/web-lkddb/BLK_DEV_NVME.html [^3]: https://cateee.net/lkddb/web-lkddb/NVME_CORE.html Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:18:42 +00:00
CONFIG_BLK_DEV_NVME=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_CPU_RMAP=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_DEFAULT_UIMAGE=y
CONFIG_FSL_ULI1575=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_IRQ_MIGRATION=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_GENERIC_TBSYNC=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_IRQ_DOMAIN_HIERARCHY=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_LOCK_SPIN_ON_OWNER=y
mpc85xx: p2020: enable CONFIG_MAX63XX_WATCHDOG This enables CONFIG_MAX63XX_WATCHDOG [1], which can be used on P2020 RDB. [1] https://cateee.net/lkddb/web-lkddb/MAX63XX_WATCHDOG.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-09-05 14:36:26 +00:00
CONFIG_MAX63XX_WATCHDOG=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_MDIO_DEVRES=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_MPC85xx_RDB=y
CONFIG_MTD_CFI=y
CONFIG_MTD_NAND_FSL_ELBC=y
mpc85xx: p2020: fix cfi-nor detection At this moment p2020rdb has broken images, because NOR memory connected to eLBC bus isn't detected. In 642b1e8dbed7 linux tree commit, config dependencies of MTD_PHYSMAP_OF was changed and now MTD_PHYSMAP is required. This patch adds MTD_PHYSMAP option to kernel config in p2020 subtarget and fix booting of p2020rdb. Fixes: 13b1db795f05 ("mpc85xx: add support for kernel 5.4") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2021-01-11 20:38:22 +00:00
CONFIG_MTD_PHYSMAP=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_NEED_DMA_MAP_STATE=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NR_CPUS=2
mpc85xx: p2020: kernel: enable CONFIG_BLK_DEV_NVME Enables use of NVMe storage devices with appropriate adapter in miniPCIe slots (including for boot) in Turris 1.x routers and possibly NXP P2020RDB boards (these are the only currently supported p2020 devices according to docs[^1]). Proper detection, mountability and readability was proved to be working on Turris 1.1, OpenWrt 21.02 with similar configuration. Increases gzip compressed kernel size by approximately 37 KiB (from 3 703 KiB to 3 740 KiB). Should boot from those devices be possible the driver needs to be built in. Inclusion as a module would prevent this functionality. CONFIG_BLK_DEV_NVME=y Includes NVMe driver in the kernel.[^2] CONFIG_NVME_CORE=y Selected by CONFIG_BLK_DEV_NVME.[^3] Not necessarily needed to be enabled explicitly, but included to match the form of similar functionality implementations for mvebu, x86_64 and rockchip_armv8 targets. CONFIG_NVME_MULTIPATH disabled explicitly to prevent using more space than necessary. [^1]: https://openwrt.org/docs/techref/targets/mpc85xx [^2]: https://cateee.net/lkddb/web-lkddb/BLK_DEV_NVME.html [^3]: https://cateee.net/lkddb/web-lkddb/NVME_CORE.html Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:18:42 +00:00
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_PADATA=y
CONFIG_PCI_MSI=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PPC_I8259=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_PPC_MSI_BITMAP=y
mpc85xx: kernel: 6.6: refresh config config-6.6 refreshed by 'make kernel_oldconfig' p2020 config-default refreshed manually Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-13 10:07:13 +00:00
CONFIG_PPC_P2020=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
mpc85xx: p2020: add RTC ds1307 to kernel If the RTC module is compiled as a module, the hctosys fails to initialize because ds1307 is loaded later. Fixes: [ 2.004145] hctosys: unable to open rtc device (rtc0) [ 11.957997] rtc-ds1307 0-006f: registered as rtc0 This is similar to commit 5481ce9a1157a43d8b2c963e03fb243e70974361, which was done for imx6 target. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-06-11 07:37:43 +00:00
CONFIG_RTC_DRV_DS1307=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_SMP=y
mpc85xx: p2020: kernel: refresh configuration 'make kernel_oldconfig CONFIG_TARGET=subtarget' applied to current master Signed-off-by: Šimon Bořek <simon.borek@nic.cz>
2022-04-19 11:11:43 +00:00
CONFIG_SWIOTLB=y
CONFIG_TARGET_CPU="8540"
CONFIG_TARGET_CPU_BOOL=y
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2018-12-30 07:38:45 +00:00
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_XPS=y
Reference in New Issue Copy Permalink