mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
76 lines
2.4 KiB
Diff
76 lines
2.4 KiB
Diff
|
From 13c570f2350f59a7994c26a51f749a50fa9b4726 Mon Sep 17 00:00:00 2001
|
||
|
|
From: Hal Feng <87058983+hal-feng@users.noreply.github.com>
|
||
|
|
Date: Tue, 20 Dec 2022 16:18:35 +0800
|
||
|
|
Subject: [PATCH 100/122] Add readme
|
||
|
|
|
||
|
|
---
|
||
|
|
README.md | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
1 file changed, 62 insertions(+)
|
||
|
|
create mode 100644 README.md
|
||
|
|
|
||
|
|
--- /dev/null
|
||
|
|
+++ b/README.md
|
||
|
|
@@ -0,0 +1,62 @@
|
||
|
|
+## JH7110 Upstream Status ##
|
||
|
|
+
|
||
|
|
+To get the latest status of each upstreaming patch series, please visit
|
||
|
|
+our RVspace.
|
||
|
|
+
|
||
|
|
+https://rvspace.org/en/project/JH7110_Upstream_Plan
|
||
|
|
+
|
||
|
|
+## Build Instructions ##
|
||
|
|
+
|
||
|
|
+1. Configure Kconfig options
|
||
|
|
+
|
||
|
|
+```shell
|
||
|
|
+# Use default selections
|
||
|
|
+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- defconfig
|
||
|
|
+```
|
||
|
|
+
|
||
|
|
+or
|
||
|
|
+
|
||
|
|
+```shell
|
||
|
|
+# Select options manually
|
||
|
|
+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- nconfig
|
||
|
|
+```
|
||
|
|
+
|
||
|
|
+To boot up the VisionFive 2 board, please make sure **SOC_STARFIVE**,
|
||
|
|
+**CLK_STARFIVE_JH7110_SYS**, **PINCTRL_STARFIVE_JH7110_SYS**,
|
||
|
|
+**SERIAL_8250_DW** are selected.
|
||
|
|
+> If you need MMC and GMAC drivers, you should also select
|
||
|
|
+**MMC_DW_STARFIVE** and **DWMAC_STARFIVE**.
|
||
|
|
+
|
||
|
|
+2. Build
|
||
|
|
+```shell
|
||
|
|
+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
|
||
|
|
+```
|
||
|
|
+
|
||
|
|
+## How to Run on VisionFive 2 Board via Network ##
|
||
|
|
+
|
||
|
|
+1. Power on, enter u-boot and set enviroment parameters
|
||
|
|
+```
|
||
|
|
+setenv fdt_high 0xffffffffffffffff; setenv initrd_high 0xffffffffffffffff;
|
||
|
|
+setenv scriptaddr 0x88100000; setenv script_offset_f 0x1fff000; setenv script_size_f 0x1000;
|
||
|
|
+setenv kernel_addr_r 0x84000000; setenv kernel_comp_addr_r 0x90000000; setenv kernel_comp_size 0x10000000;
|
||
|
|
+setenv fdt_addr_r 0x88000000; setenv ramdisk_addr_r 0x88300000;
|
||
|
|
+```
|
||
|
|
+2. Set IP addresses for the board and your tftp server
|
||
|
|
+```
|
||
|
|
+setenv serverip 192.168.w.x; setenv gatewayip 192.168.w.y; setenv ipaddr 192.168.w.z; setenv hostname starfive; setenv netdev eth0;
|
||
|
|
+```
|
||
|
|
+3. Upload dtb, image and file system to DDR from your tftp server
|
||
|
|
+```
|
||
|
|
+tftpboot ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb; tftpboot ${kernel_addr_r} Image.gz; tftpboot ${ramdisk_addr_r} initramfs.cpio.gz;
|
||
|
|
+```
|
||
|
|
+> If your VisionFive 2 is v1.2A, you should upload jh7110-starfive-visionfive-2-v1.2a.dtb instead.
|
||
|
|
+4. Load and boot the kernel
|
||
|
|
+```
|
||
|
|
+booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
|
||
|
|
+```
|
||
|
|
+When you see the message "buildroot login:", the launch was successful.
|
||
|
|
+You can just input the following accout and password, then continue.
|
||
|
|
+```
|
||
|
|
+buildroot login: root
|
||
|
|
+Password: starfive
|
||
|
|
+```
|