openwrt/target/linux/generic/backport-6.6/895-07-v6.8-net-phylink-use-the-PHY-s-possible_interfaces-if-pop.patch

From 8f7a9799c5949f94ecc3acfd71b36437a7ade73b Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Fri, 24 Nov 2023 12:28:39 +0000
Subject: [PATCH 7/7] net: phylink: use the PHY's possible_interfaces if
 populated

Some PHYs such as Aquantia, Broadcom 84881, and Marvell 88X33x0 can
switch between a set of interface types depending on the negotiated
media speed, or can use rate adaption for some or all of these
interface types.

We currently assume that these are Clause 45 PHYs that are configured
not to use a specific set of interface modes, which has worked so far,
but is just a work-around. In this workaround, we validate using all
interfaces that the MAC supports, which can lead to extra modes being
advertised that can not be supported.

To properly address this, switch to using the newly introduced PHY
possible_interfaces bitmap which indicates which interface modes will
be used by the PHY as configured. We calculate the union of the PHY's
possible interfaces and MACs supported interfaces, checking that is
non-empty. If the PHY is on a SFP, we further reduce the set by those
which can be used on a SFP module, again checking that is non-empty.
Finally, we validate the subset of interfaces, taking account of
whether rate matching will be used for each individual interface mode.

This becomes independent of whether the PHY is clause 22 or clause 45.

It is encouraged that all PHYs that switch interface modes or use
rate matching should populate phydev->possible_interfaces.

Tested-by: Luo Jie <quic_luoj@quicinc.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1r6VIV-00DDMF-Pi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
 drivers/net/phy/phylink.c | 67 +++++++++++++++++++++++++++++++--------
 1 file changed, 54 insertions(+), 13 deletions(-)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -121,6 +121,19 @@ do {									\
 })
 #endif
 
+static const phy_interface_t phylink_sfp_interface_preference[] = {
+	PHY_INTERFACE_MODE_25GBASER,
+	PHY_INTERFACE_MODE_USXGMII,
+	PHY_INTERFACE_MODE_10GBASER,
+	PHY_INTERFACE_MODE_5GBASER,
+	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_1000BASEX,
+	PHY_INTERFACE_MODE_100BASEX,
+};
+
+static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
+
 /**
  * phylink_set_port_modes() - set the port type modes in the ethtool mask
  * @mask: ethtool link mode mask
@@ -1779,6 +1792,47 @@ static int phylink_validate_phy(struct p
 				unsigned long *supported,
 				struct phylink_link_state *state)
 {
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+	/* If the PHY provides a bitmap of the interfaces it will be using
+	 * depending on the negotiated media speeds, use this to validate
+	 * which ethtool link modes can be used.
+	 */
+	if (!phy_interface_empty(phy->possible_interfaces)) {
+		/* We only care about the union of the PHY's interfaces and
+		 * those which the host supports.
+		 */
+		phy_interface_and(interfaces, phy->possible_interfaces,
+				  pl->config->supported_interfaces);
+
+		if (phy_interface_empty(interfaces)) {
+			phylink_err(pl, "PHY has no common interfaces\n");
+			return -EINVAL;
+		}
+
+		if (phy_on_sfp(phy)) {
+			/* If the PHY is on a SFP, limit the interfaces to
+			 * those that can be used with a SFP module.
+			 */
+			phy_interface_and(interfaces, interfaces,
+					  phylink_sfp_interfaces);
+
+			if (phy_interface_empty(interfaces)) {
+				phylink_err(pl, "SFP PHY's possible interfaces becomes empty\n");
+				return -EINVAL;
+			}
+		}
+
+		phylink_dbg(pl, "PHY %s uses interfaces %*pbl, validating %*pbl\n",
+			    phydev_name(phy),
+			    (int)PHY_INTERFACE_MODE_MAX,
+			    phy->possible_interfaces,
+			    (int)PHY_INTERFACE_MODE_MAX, interfaces);
+
+		return phylink_validate_mask(pl, phy, supported, state,
+					     interfaces);
+	}
+
 	/* Check whether we would use rate matching for the proposed interface
 	 * mode.
 	 */
@@ -3047,19 +3101,6 @@ static void phylink_sfp_detach(void *ups
 	pl->netdev->sfp_bus = NULL;
 }
 
-static const phy_interface_t phylink_sfp_interface_preference[] = {
-	PHY_INTERFACE_MODE_25GBASER,
-	PHY_INTERFACE_MODE_USXGMII,
-	PHY_INTERFACE_MODE_10GBASER,
-	PHY_INTERFACE_MODE_5GBASER,
-	PHY_INTERFACE_MODE_2500BASEX,
-	PHY_INTERFACE_MODE_SGMII,
-	PHY_INTERFACE_MODE_1000BASEX,
-	PHY_INTERFACE_MODE_100BASEX,
-};
-
-static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
-
 static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
 						    const unsigned long *intf)
 {