ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 01:59:02 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
efcc100ef0
openwrt/target/linux/rockchip/image/armv8.mk

111 lines
2.8 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 11:57:25 +00:00
#
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# Copyright (C) 2020 Tobias Maedel
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
rockchip: use LZMA FIT for kernel image Use LZMA compressed kernel to save some space in boot partition. Fixes: #11197 Tested-by: Tianling Shen <cnsztl@immortalwrt.org> [NanoPi R2S] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-11-13 13:29:26 +00:00
# FIT will be loaded at 0x02080000. Leave 16M for that, align it to 2M and load the kernel after it.
KERNEL_LOADADDR := 0x03200000
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-07 15:50:49 +00:00
define Device/firefly_roc-rk3328-cc
DEVICE_VENDOR := Firefly
DEVICE_MODEL := ROC-RK3328-CC
SOC := rk3328
DEVICE_DTS := rockchip/rk3328-roc-cc
UBOOT_DEVICE_NAME := roc-cc-rk3328
endef
TARGET_DEVICES += firefly_roc-rk3328-cc
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 07:22:42 +00:00
define Device/friendlyarm_nanopc-t4
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPC T4
SOC := rk3399
rockchip: enable wifi support for NanoPC T4 wifi module: AP6356S (BCM4356) SDIO Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 08:11:28 +00:00
DEVICE_PACKAGES := kmod-brcmfmac brcmfmac-nvram-4356-sdio cypress-firmware-4356-sdio
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 07:22:42 +00:00
endef
TARGET_DEVICES += friendlyarm_nanopc-t4
rockchip: add NanoPi R2C support The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-13 05:54:38 +00:00
define Device/friendlyarm_nanopi-r2c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
define Device/friendlyarm_nanopi-r2s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2S
SOC := rk3328
treewide: make dependency on kmod-usb-net selective A bunch of kernel modules depends on kmod-usb-net, but does not select it. Make AddDepends/usb-net selective, so we can drop some redundant +kmod-usb-net definitions for DEVICE_PACKAGES. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-05 10:03:13 +00:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r2s
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. ===================================== NOTICE FOR USERS WHO USE 1GB VERSION: BY NOW IT IS NOT SUPPORTED ==================================== [initialed target] Co-developed-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com> [fixed bootscript] Co-developed-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com> Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2020-12-25 12:03:14 +00:00
define Device/friendlyarm_nanopi-r4s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4S
DEVICE_VARIANT := 4GB LPDDR4
SOC := rk3399
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-25 16:37:31 +00:00
define Device/friendlyarm_nanopi-r5c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5C
SOC := rk3568
DEVICE_PACKAGES := kmod-r8169 kmod-rtw88-8822ce rtl8822ce-firmware wpad-basic-mbedtls
endef
TARGET_DEVICES += friendlyarm_nanopi-r5c
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-25 16:37:30 +00:00
define Device/friendlyarm_nanopi-r5s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5S
SOC := rk3568
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopi-r5s
rockchip: add support for PINE64 ROCK64 This add support for PINE64 ROCK64, rockchip rk3328 board. Specifications: 4 x ARM Cortex A53 cores @ 1.5 GHz ARM Mali 450 MP2 GPU LPDDR3 RAM (up to 4GB) Gigabit Ethernet Micro SD Slot eMMC module slot SPI Flash 128Mbit 4K digital video out 2x USB 2.0 Host 1x USB 3.0 Host PI-2 bus PI-P5+ bus IR R/X port Real Time Clock (RTC) port Power Over Ethernet (POE) (when using optional HAT module) A/V jack Power, Reset and Recovery buttons 3.5mm barrel power (5V 3A) port To install write image to the sd using dd (dd if=*.img of=/*) Signed-off-by: Antonio Flores <antflores627@gmail.com>
2023-07-08 17:31:49 +00:00
define Device/pine64_rock64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Rock64
SOC := rk3328
endef
TARGET_DEVICES += pine64_rock64
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 11:57:25 +00:00
define Device/pine64_rockpro64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := RockPro64
SOC := rk3399
endef
TARGET_DEVICES += pine64_rockpro64
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
define Device/radxa_rock-pi-4a
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
DEVICE_VENDOR := Radxa
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
DEVICE_MODEL := ROCK Pi 4A
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
SOC := rk3399
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
SUPPORTED_DEVICES := radxa,rockpi4a radxa,rockpi4
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
UBOOT_DEVICE_NAME := rock-pi-4-rk3399
endef
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
TARGET_DEVICES += radxa_rock-pi-4a
rockchip: add Orange Pi R1 Plus support Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Note: booting from SPI is currently unsupported, you have to install the image on a SD card. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
rockchip: add support for Radxa ROCK Pi E This adds support for Radxa ROCK Pi E, rockchip rk3328 board. Specification: - CPU: Rockchip RK3328 64-bit Quad-core - RAM: DDR3 256MB ~ 2GB - Network: 1 x 10/100/1000M Ethernet 1 x 10/100M Ethernet - Storage: 1 x MicroSD Slot 1 x eMMC Module Slot - USB Host/OTG: 1 x USB3.0 Type A HOST 1 x USB2.0 HOST (40-pin pin-header) - Wireless RTL8723DU/RTL8821CU - Debug Serial: 1500000 baud at UART2 ( 40-pin pin-header) - Power Supply: Type-C 5V Optionally PoE Installation: - Write image to SD Card or EMMC with dd - Boot ROCK Pi E from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2023-08-29 18:23:30 +00:00
define Device/radxa_rock-pi-e
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi E
SOC := rk3328
endef
TARGET_DEVICES += radxa_rock-pi-e
rockchip: add Orange Pi R1 Plus support Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Note: booting from SPI is currently unsupported, you have to install the image on a SD card. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
define Device/xunlong_orangepi-r1-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus
rockchip: add Orange Pi R1 Plus LTS support The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise identical to OrangePi R1 Plus. Tested-by: Volkan Yetik <no3iverson@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
define Device/xunlong_orangepi-r1-plus-lts
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus LTS
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus-lts
Reference in New Issue Copy Permalink