openwrt/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom

#!/bin/sh
# Based on ar71xx 10-ath9k-eeprom

[ -e /lib/firmware/$FIRMWARE ] && exit 0

. /lib/functions.sh
. /lib/functions/system.sh
. /lib/functions/lantiq.sh
. /lib/upgrade/nand.sh

# xor multiple hex values of the same length
xor() {
	local val
	local ret="0x$1"
	local retlen=${#1}

	shift
	while [ -n "$1" ]; do
		val="0x$1"
		ret=$((ret ^ val))
		shift
	done

	printf "%0${retlen}x" "$ret"
}

ath9k_eeprom_die() {
	echo "ath9k eeprom: $*"
	exit 1
}

ath9k_eeprom_extract_raw() {
	local source=$1
	local offset=$2
	local size=4096

	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$size 2>/dev/null || \
			ath9k_eeprom_die "failed to extract from $mtd"
}

ath9k_eeprom_extract() {
	local part=$1
	local offset=$2
	local mtd

	mtd=$(find_mtd_chardev $part)
	[ -n "$mtd" ] || \
		ath9k_eeprom_die "no mtd device found for partition $part"

	ath9k_eeprom_extract_raw $mtd $offset
}

ath9k_ubi_eeprom_extract() {
	local part=$1
	local offset=$2
	local ubidev=$(nand_find_ubi $CI_UBIPART)
	local ubi

	ubi=$(nand_find_volume $ubidev $part)
	[ -n "$ubi" ] || \
		ath9k_eeprom_die "no UBI volume found for $part"

	ath9k_eeprom_extract_raw /dev/$ubi $offset
}

ath9k_patch_firmware_mac() {
	local mac=$1
	local mac_offset=$2
	local swap=$3
	local chksum_offset=$4
	local xor_mac
	local xor_fw_mac
	local xor_fw_chksum

	[ -z "$mac" -o -z "$mac_offset" ] && return

	[ $swap -gt 0 ] && mac="${mac:3:2}:${mac:0:2}:${mac:9:2}:${mac:6:2}:${mac:15:2}:${mac:12:2}"

	[ -n "$chksum_offset" ] && {
		xor_mac=${mac//:/}
		xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"

		xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
		xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"

		xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
		xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)

		printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
	}

	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
}

case "$FIRMWARE" in
	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
	"ath9k-eeprom-pci-0000:02:00.0.bin")
		board=$(lantiq_board_name)

		case "$board" in
			ARV7518PW)
				ath9k_eeprom_extract "boardconfig" 1024
				;;
			ARV8539PW22)
				ath9k_eeprom_extract "art" 1024
				;;
			BTHOMEHUBV2B)
				ath9k_eeprom_extract "art" 0
				ath9k_patch_firmware_mac "00:00:00:00:00:00" 524 1 514
				;;
			BTHOMEHUBV3A)
				ath9k_eeprom_extract "art-copy" 0
				ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 1 258
				;;
			BTHOMEHUBV5A)
				ath9k_ubi_eeprom_extract "caldata" 4096
				ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi caldata 4364) +2) 268 0 258
				;;
			DGN3500*)
				ath9k_eeprom_extract "calibration" 61440
				ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 0 514
				;;
			FRITZ3370)
				ath9k_eeprom_extract "urlader" 2437
				ath9k_patch_firmware_mac "00:00:00:00:00:00" 2 0
				;;
			FRITZ7320|FRITZ7360SL)
				ath9k_eeprom_extract "urlader" 2437
				ath9k_patch_firmware_mac "00:00:00:00:00:00" 268 0 258
				;;
			TDW8970|TDW8980)
				ath9k_eeprom_extract "boardconfig" 135168
				;;
			*)
				ath9k_eeprom_die "board $board is not supported yet"
				;;
		esac
		;;
esac