openwrt/target/linux/bcm27xx/patches-5.15/950-0755-drm-vc4-hvs-Reset-muxes-at-probe-time.patch

From d2a60430df21f213b9b9d2eb46d2f4afbbea3213 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Fri, 4 Mar 2022 16:24:00 +0100
Subject: [PATCH] drm/vc4: hvs: Reset muxes at probe time

By default, the HVS driver will force the HVS output 3 to be muxed to
the HVS channel 2. However, the Transposer can only be assigned to the
HVS channel 2, so whenever we try to use the writeback connector, we'll
mux its associated output (Output 2) to the channel 2.

This leads to both the output 2 and 3 feeding from the same channel,
which is explicitly discouraged in the documentation.

In order to avoid this, let's reset all the output muxes to their reset
value.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hvs.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -1017,6 +1017,7 @@ static int vc4_hvs_bind(struct device *d
 	struct vc4_hvs *hvs = NULL;
 	int ret;
 	u32 dispctrl;
+	u32 reg;
 
 	hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL);
 	if (!hvs)
@@ -1090,6 +1091,26 @@ static int vc4_hvs_bind(struct device *d
 
 	vc4->hvs = hvs;
 
+	reg = HVS_READ(SCALER_DISPECTRL);
+	reg &= ~SCALER_DISPECTRL_DSP2_MUX_MASK;
+	HVS_WRITE(SCALER_DISPECTRL,
+		  reg | VC4_SET_FIELD(0, SCALER_DISPECTRL_DSP2_MUX));
+
+	reg = HVS_READ(SCALER_DISPCTRL);
+	reg &= ~SCALER_DISPCTRL_DSP3_MUX_MASK;
+	HVS_WRITE(SCALER_DISPCTRL,
+		  reg | VC4_SET_FIELD(3, SCALER_DISPCTRL_DSP3_MUX));
+
+	reg = HVS_READ(SCALER_DISPEOLN);
+	reg &= ~SCALER_DISPEOLN_DSP4_MUX_MASK;
+	HVS_WRITE(SCALER_DISPEOLN,
+		  reg | VC4_SET_FIELD(3, SCALER_DISPEOLN_DSP4_MUX));
+
+	reg = HVS_READ(SCALER_DISPDITHER);
+	reg &= ~SCALER_DISPDITHER_DSP5_MUX_MASK;
+	HVS_WRITE(SCALER_DISPDITHER,
+		  reg | VC4_SET_FIELD(3, SCALER_DISPDITHER_DSP5_MUX));
+
 	dispctrl = HVS_READ(SCALER_DISPCTRL);
 
 	dispctrl |= SCALER_DISPCTRL_ENABLE;
@@ -1097,10 +1118,6 @@ static int vc4_hvs_bind(struct device *d
 		    SCALER_DISPCTRL_DISPEIRQ(1) |
 		    SCALER_DISPCTRL_DISPEIRQ(2);
 
-	/* Set DSP3 (PV1) to use HVS channel 2, which would otherwise
-	 * be unused.
-	 */
-	dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK;
 	dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
 		      SCALER_DISPCTRL_SLVWREIRQ |
 		      SCALER_DISPCTRL_SLVRDEIRQ |
@@ -1114,7 +1131,6 @@ static int vc4_hvs_bind(struct device *d
 		      SCALER_DISPCTRL_DSPEISLUR(1) |
 		      SCALER_DISPCTRL_DSPEISLUR(2) |
 		      SCALER_DISPCTRL_SCLEIRQ);
-	dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX);
 
 	HVS_WRITE(SCALER_DISPCTRL, dispctrl);