mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
93 lines
4.0 KiB
Diff
93 lines
4.0 KiB
Diff
|
From ef972fc9f5743da589ce9546dd565d6c56e679b8 Mon Sep 17 00:00:00 2001
|
|||
|
|
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
|
|||
|
|
Date: Mon, 8 Apr 2024 10:08:53 +0300
|
|||
|
|
Subject: [PATCH 1/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on
|
|||
|
|
all boards
|
|||
|
|
MIME-Version: 1.0
|
|||
|
|
Content-Type: text/plain; charset=UTF-8
|
|||
|
|
Content-Transfer-Encoding: 8bit
|
|||
|
|
|
|||
|
|
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
|
|||
|
|
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
|
|||
|
|
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
|
|||
|
|
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
|
|||
|
|
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
|
|||
|
|
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
|
|||
|
|
internal EEE switch bit.
|
|||
|
|
|
|||
|
|
There are existing boards that were not designed to pull the pin low.
|
|||
|
|
Because of that, the EEE status currently depends on the board design.
|
|||
|
|
|
|||
|
|
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
|
|||
|
|
used to control an LED. Once the bit is unset, the pin will be low. That
|
|||
|
|
will make the active low LED turn on. The pin is controlled by the switch
|
|||
|
|
PHY. It seems that the PHY controls the pin in the way that it inverts the
|
|||
|
|
pin state. That means depending on the wiring of the LED connected to
|
|||
|
|
LAN2LED0 on the board, the LED may be on without an active link.
|
|||
|
|
|
|||
|
|
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
|
|||
|
|
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
|
|||
|
|
|
|||
|
|
My testing on MT7531 shows a certain amount of traffic loss when EEE is
|
|||
|
|
enabled. That said, I haven't come across a board that enables EEE. So
|
|||
|
|
enable EEE on the switch MACs but disable EEE advertisement on the switch
|
|||
|
|
PHYs. This way, we don't change the behaviour of the majority of the boards
|
|||
|
|
that have this switch. The mediatek-ge PHY driver already disables EEE
|
|||
|
|
advertisement on the switch PHYs but my testing shows that it is somehow
|
|||
|
|
enabled afterwards. Disabling EEE advertisement before the PHY driver
|
|||
|
|
initialises keeps it off.
|
|||
|
|
|
|||
|
|
With this change, EEE can now be enabled using ethtool.
|
|||
|
|
|
|||
|
|
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
|
|||
|
|
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|||
|
|
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
|
|||
|
|
---
|
|||
|
|
drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
|
|||
|
|
drivers/net/dsa/mt7530.h | 1 +
|
|||
|
|
2 files changed, 13 insertions(+), 5 deletions(-)
|
|||
|
|
|
|||
|
|
--- a/drivers/net/dsa/mt7530.c
|
|||
|
|
+++ b/drivers/net/dsa/mt7530.c
|
|||
|
|
@@ -2505,18 +2505,25 @@ mt7531_setup(struct dsa_switch *ds)
|
|||
|
|
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
|
|||
|
|
MT7531_GPIO0_INTERRUPT);
|
|||
|
|
|
|||
|
|
- /* Enable PHY core PLL, since phy_device has not yet been created
|
|||
|
|
- * provided for phy_[read,write]_mmd_indirect is called, we provide
|
|||
|
|
- * our own mt7531_ind_mmd_phy_[read,write] to complete this
|
|||
|
|
- * function.
|
|||
|
|
+ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
|
|||
|
|
+ * phy_device has not yet been created provided for
|
|||
|
|
+ * phy_[read,write]_mmd_indirect is called, we provide our own
|
|||
|
|
+ * mt7531_ind_mmd_phy_[read,write] to complete this function.
|
|||
|
|
*/
|
|||
|
|
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
|
|||
|
|
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
|
|||
|
|
- val |= MT7531_PHY_PLL_BYPASS_MODE;
|
|||
|
|
+ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
|
|||
|
|
val &= ~MT7531_PHY_PLL_OFF;
|
|||
|
|
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
|
|||
|
|
CORE_PLL_GROUP4, val);
|
|||
|
|
|
|||
|
|
+ /* Disable EEE advertisement on the switch PHYs. */
|
|||
|
|
+ for (i = MT753X_CTRL_PHY_ADDR;
|
|||
|
|
+ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
|
|||
|
|
+ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
|
|||
|
|
+ 0);
|
|||
|
|
+ }
|
|||
|
|
+
|
|||
|
|
mt7531_setup_common(ds);
|
|||
|
|
|
|||
|
|
/* Setup VLAN ID 0 for VLAN-unaware bridges */
|
|||
|
|
--- a/drivers/net/dsa/mt7530.h
|
|||
|
|
+++ b/drivers/net/dsa/mt7530.h
|
|||
|
|
@@ -616,6 +616,7 @@ enum mt7531_clk_skew {
|
|||
|
|
#define RG_SYSPLL_DDSFBK_EN BIT(12)
|
|||
|
|
#define RG_SYSPLL_BIAS_EN BIT(11)
|
|||
|
|
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
|
|||
|
|
+#define MT7531_RG_SYSPLL_DMY2 BIT(6)
|
|||
|
|
#define MT7531_PHY_PLL_OFF BIT(5)
|
|||
|
|
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
|
|||
|
|
|