openwrt/target/linux/generic/backport-5.15/736-v6.1-0002-net-phy-aquantia-Add-support-for-rate-matching.patch

From 3c42563b30417afc8855a3b4c1b38c2f36f78657 Mon Sep 17 00:00:00 2001
From: Sean Anderson <sean.anderson@seco.com>
Date: Tue, 20 Sep 2022 18:12:35 -0400
Subject: [PATCH] net: phy: aquantia: Add support for rate matching

This adds support for rate matching for phys similar to the AQR107. We
assume that all phys using aqr107_read_status support rate matching.
However, it could be possible to determine support based on the firmware
revision if there are phys discovered which do not support rate
matching.  However, as rate matching is advertised in the datasheets for
these phys, I suspect it is supported most boards.

Despite the name, the "config" registers are updated with the current
rate matching method (if any). Because they appear to be updated
automatically, I don't know if these registers can be used to disable
rate matching.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/aquantia_main.c | 51 ++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -97,6 +97,19 @@
 #define VEND1_GLOBAL_GEN_STAT2			0xc831
 #define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
 
+/* The following registers all have similar layouts; first the registers... */
+#define VEND1_GLOBAL_CFG_10M			0x0310
+#define VEND1_GLOBAL_CFG_100M			0x031b
+#define VEND1_GLOBAL_CFG_1G			0x031c
+#define VEND1_GLOBAL_CFG_2_5G			0x031d
+#define VEND1_GLOBAL_CFG_5G			0x031e
+#define VEND1_GLOBAL_CFG_10G			0x031f
+/* ...and now the fields */
+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+
 #define VEND1_GLOBAL_RSVD_STAT1			0xc885
 #define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
 #define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
@@ -347,40 +360,57 @@ static int aqr_read_status(struct phy_de
 
 static int aqr107_read_rate(struct phy_device *phydev)
 {
+	u32 config_reg;
 	int val;
 
 	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
 	if (val < 0)
 		return val;
 
+	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
 	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
 	case MDIO_AN_TX_VEND_STATUS1_10BASET:
 		phydev->speed = SPEED_10;
+		config_reg = VEND1_GLOBAL_CFG_10M;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
 		phydev->speed = SPEED_100;
+		config_reg = VEND1_GLOBAL_CFG_100M;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
 		phydev->speed = SPEED_1000;
+		config_reg = VEND1_GLOBAL_CFG_1G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
 		phydev->speed = SPEED_2500;
+		config_reg = VEND1_GLOBAL_CFG_2_5G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
 		phydev->speed = SPEED_5000;
+		config_reg = VEND1_GLOBAL_CFG_5G;
 		break;
 	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
 		phydev->speed = SPEED_10000;
+		config_reg = VEND1_GLOBAL_CFG_10G;
 		break;
 	default:
 		phydev->speed = SPEED_UNKNOWN;
-		break;
+		return 0;
 	}
 
-	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
-		phydev->duplex = DUPLEX_FULL;
+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
+	if (val < 0)
+		return val;
+
+	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
+	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
+		phydev->rate_matching = RATE_MATCH_PAUSE;
 	else
-		phydev->duplex = DUPLEX_HALF;
+		phydev->rate_matching = RATE_MATCH_NONE;
 
 	return 0;
 }
@@ -647,6 +677,16 @@ static int aqr107_wait_processor_intensi
 	return 0;
 }
 
+static int aqr107_get_rate_matching(struct phy_device *phydev,
+				    phy_interface_t iface)
+{
+	if (iface == PHY_INTERFACE_MODE_10GBASER ||
+	    iface == PHY_INTERFACE_MODE_2500BASEX ||
+	    iface == PHY_INTERFACE_MODE_NA)
+		return RATE_MATCH_PAUSE;
+	return RATE_MATCH_NONE;
+}
+
 static int aqr107_suspend(struct phy_device *phydev)
 {
 	int err;
@@ -720,6 +760,7 @@ static struct phy_driver aqr_driver[] =
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
 	.name		= "Aquantia AQR107",
 	.probe		= aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
 	.config_init	= aqr107_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
@@ -738,6 +779,7 @@ static struct phy_driver aqr_driver[] =
 	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
 	.name		= "Aquantia AQCS109",
 	.probe		= aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
 	.config_init	= aqcs109_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
@@ -764,6 +806,7 @@ static struct phy_driver aqr_driver[] =
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
 	.name           = "Aquantia AQR113C",
 	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
 	.config_init    = aqr107_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr    = aqr_config_intr,