ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 18:47:06 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
eb58eba08b
openwrt/package/firmware/rcw/Makefile

99 lines
2.3 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
PKG_NAME:=rcw
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
PKG_VERSION:=2017.09
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
PKG_SOURCE_URL:=https://github.com/qoriq-open-source/rcw.git
PKG_SOURCE_VERSION:=1a6236a34166219de324a105971eb9de05cde76e
PKG_MIRROR_HASH:=6da17ad6b4d148bd991a85bf601f845a41231d6f0bf20153ba1a7a387727aef0
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
treewide: clean up and unify PKG_VERSION for git based downloads Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-21 21:25:41 +00:00
PKG_BUILD_DIR=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
PKG_LICENSE:=BSD-3-Clause
PKG_LICENSE_FILES:=LICENSE
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
packages: mark packages depending on a target as nonshared The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-19 08:18:57 +00:00
PKG_FLAGS:=nonshared
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
include $(INCLUDE_DIR)/package.mk
define rcw/Default
TITLE:=
CONFIG:=
endef
define rcw/ls1043ardb
TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1043ardb 64b/32b Dev Board
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
CONFIG=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
define rcw/ls1046ardb
TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1046ardb 64b/32b Dev Board
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
CONFIG=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot_swap.bin
layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
endef
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
define rcw/ls1012ardb
TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012ardb 64b/32b Dev Board
layerscape: update packages with LSDK git trees NXP Layerscape LSDK had set up its own open source web site and github for release. https://lsdk.github.io https://github.com/qoriq-open-source This patch is to update rcw/fman_ucode/u-boot packages with LSDK git trees. Also add some patches of packages to support LEDE. Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images but 64-bit toolchain couldn't be used for 32-bit targets, we still use a private tree for ARMv8 32-bit u-boot images. This is in plan to move this private tree to NXP Layerscape github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-07-03 02:48:27 +00:00
CONFIG=ls1012ardb/R_SPNH_3508/PBL_0x35_0x08_800_250_1000_default.bin
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
endef
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
RCWS := \
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
ls1043ardb \
layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
ls1046ardb \
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
ls1012ardb
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
define Package/rcw/template
define Package/rcw-layerscape-$(1)
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:= @TARGET_layerscape
TITLE:=$(2)
URL:=http://git.freescale.com/git/cgit.cgi/ppc/sdk/rcw.git
VARIANT:=$(1)
MAINTAINER:=Jiang Yutang <jiangyutang1978@gmail.com>
endef
endef
define BuildRCWPackage
$(eval $(rcw/Default))
$(eval $(rcw/$(1)))
$(call Package/rcw/template,$(1),$(TITLE))
endef
ifdef BUILD_VARIANT
$(eval $(call rcw/$(BUILD_VARIANT)))
RCW_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
endif
define Build/Configure
endef
define Package/rcw/install/default
layerscape: put u-boot and ucode images into image staging directory Do not put the u-boot and ucode images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 15:06:31 +00:00
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/$(RCW_CONFIG) $(STAGING_DIR_IMAGE)/$(1)-rcw.bin
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
define Package/rcw/install/template
define Package/rcw-layerscape-$(1)/install
$(call Package/rcw/install/default,$(2))
endef
endef
$(foreach r,$(RCWS), \
$(eval $(call Package/rcw/install/template,$(r),$(r))) \
)
$(foreach r,$(RCWS), \
$(eval $(call BuildRCWPackage,$(r))) \
$(eval $(call BuildPackage,rcw-layerscape-$(r))) \
)
Reference in New Issue Copy Permalink