openwrt/target/linux/ath79/dts/ar9344_tplink_tl-wdr3500-v1.dts

90 lines
1.3 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_tplink_tl-wdrxxxx.dtsi"
/ {
model = "TP-Link TL-WDR3500 v1";
compatible = "tplink,tl-wdr3500-v1", "qca,ar9344";
aliases {
label-mac-device = &wmac;
};
};
&leds {
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port>;
};
};
&gpio {
usb_power {
gpio-hog;
gpios = <12 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "tp-link:power:usb";
};
};
&pinmux {
pmx_led_wan_lan: pinmux_led_wan_lan {
pinctrl-single,bits = <0x10 0x2c2d0000 0xffff0000>,
<0x14 0x292a2b 0xffffff>;
};
};
&builtin_switch {
pinctrl-names = "default";
pinctrl-0 = <&pmx_led_wan_lan>;
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&ath9k {
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&wmac {
mtd-mac-address = <&uboot 0x1fc00>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <0>;
switch-only-mode = <1>;
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <2>;
};