openwrt/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts

158 lines
2.6 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "ASUS RP-AC51";
compatible = "asus,rp-ac51", "qca,qca9531";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
wps {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
led_wps: wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "blue:wlan5g";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&precal_art_5000>;
nvmem-cell-names = "pre-calibration";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x10000>;
read-only;
};
art: partition@50000 {
label = "art";
reg = <0x050000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_1002: macaddr@1002 {
reg = <0x1002 0x6>;
};
precal_art_5000: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
partition@60000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x060000 0xfa0000>;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_art_1002>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
qca,no-eeprom;
};