openwrt/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts

177 lines
2.9 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-wdr6500-v2", "qca,qca9561";
model = "TP-Link TL-WDR6500 v2";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &eth1;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
lan4 {
label = "green:lan4";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "green:lan2";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "green:lan1";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan {
label = "green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
led_system: system {
label = "white:system";
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_0fc00: macaddr@0fc00 {
reg = <0x0fc00 0x6>;
};
};
};
partition@10000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x010000 0x7e0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
calibration_ath9k: calibration@1000 {
reg = <0x1000 0x440>;
};
calibration_ath10k: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath10k>;
nvmem-cell-names = "mac-address", "calibration";
mac-address-increment = <(-2)>;
};
};
&mdio0 {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_uboot_0fc00>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_uboot_0fc00>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath9k>;
nvmem-cell-names = "mac-address", "calibration";
mac-address-increment = <(-1)>;
};
&usb0 {
status = "okay";
};
&usb_phy0 {
status = "okay";
};