openwrt/target/linux/ramips/rt288x/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=rt288x
BOARDNAME:=RT288x based boards
FEATURES+=small_flash
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic-mbedtls swconfig

define Target/Description
	Build firmware images for Ralink RT288x based boards.
endef
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

			`SUBTARGET:=rt288x`
			`BOARDNAME:=RT288x based boards`
kernel: only optimized for size if small_flash Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me> 2018-07-09 18:48:56 +00:00			`FEATURES+=small_flash`
ramips/rt288x: switch CPU_TYPE to 24kc While rt288x only has a MIPS 4KEc processor, it implements the MIPS32r2 architecture just like the 24Kc, so the instruction set should be 100% compatible. Switching it to 24kc allows it to share the package architecture with a lot of other targets instead of creating a special case, saving buildbot resources. Signed-off-by: Felix Fietkau <nbd@nbd.name> 2017-01-24 11:25:05 +00:00			`CPU_TYPE:=24kc`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com> 2022-12-28 04:44:11 +00:00			`DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic-mbedtls swconfig`
ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145 2014-06-11 17:01:19 +00:00
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`define Target/Description`
			`Build firmware images for Ralink RT288x based boards.`
			`endef`