openwrt/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch

40 lines
1.2 KiB
Diff
Raw Normal View History

From d6af8f27223a244d74ab44842bdec707c97cfe55 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 12 Aug 2013 14:14:48 -0300
Subject: [PATCH 115/203] mtd: nand: pxa3xx: Handle ECC and DMA enable/disable
properly
When ECC is not selected, the ECC enable bit must be cleared
in the NAND control register. Same applies to DMA.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -314,8 +314,17 @@ static void pxa3xx_nand_start(struct pxa
uint32_t ndcr;
ndcr = host->reg_ndcr;
- ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
- ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
+
+ if (info->use_ecc)
+ ndcr |= NDCR_ECC_EN;
+ else
+ ndcr &= ~NDCR_ECC_EN;
+
+ if (info->use_dma)
+ ndcr |= NDCR_DMA_EN;
+ else
+ ndcr &= ~NDCR_DMA_EN;
+
ndcr |= NDCR_ND_RUN;
/* clear status bits and run */