openwrt/target/linux/ipq40xx/generic/target.mk

BOARDNAME:=Generic
FEATURES+=emmc
DEFAULT_PACKAGES += ath10k-board-qca4019
ipqx0xx: add Generic subtarget Both targets miss a subtarget causing an image naming style which is different from other all othe targets, even tho it already uses `x/generic/` as subfolder as if the subtarget would exist. This commit adds the Generic subtarget resulting in consistent naming. ~/src/openwrt/openwrt/bin/targets/ipq806x/generic$ ls openwrt-ipq806x-generic-netgear_d7800-initramfs-uImage openwrt-ipq806x-generic-netgear-d7800.manifest openwrt-ipq806x-generic-netgear_d7800-squashfs-factory.img openwrt-ipq806x-generic-netgear_d7800-squashfs-sysupgrade.bin CC: John Crispin <john@phrozen.org> Signed-off-by: Paul Spooren <mail@aparcar.org> 2019-08-22 00:59:24 +00:00			`BOARDNAME:=Generic`
ipq40xx: add support for GL.iNet GL-B2200 This patch adds supports for the GL-B2200 router. Specifications: - SOC: Qualcomm IPQ4019 ARM Quad-Core - RAM: 512 MiB - Flash: 16 MiB NOR - SPI0 - EMMC: 8GB EMMC - ETH: Qualcomm QCA8075 - WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11b/g/n 2x2 - WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11n/ac W2 2x2 - WLAN3: Qualcomm Atheros QCA9886 5GHz 802.11n/ac W2 2x2 - INPUT: Reset, WPS - LED: Power, Internet - UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 - UART2: On board with BLE module - SPI1: On board socket for Zigbee module Update firmware instructions: Please update the firmware via U-Boot web UI (by default at 192.168.1.1, following instructions found at https://docs.gl-inet.com/en/3/troubleshooting/debrick/). Normal sysupgrade, either via CLI or LuCI, is not possible from stock firmware. Please do use the gl-b2200-squashfs-emmc.img file, gunzipping the produced gl-b2200-squashfs-emmc.img.gz one first. What's working: - WiFi 2G, 5G - WPA2/WPA3 Not tested: - Bluetooth LE/Zigbee Credits goes to the original authors of this patch. V1->V2: - updates *arm-boot-add-dts-files.patch correctly (sorry, my mistake) - add uboot-envtools support V2->V3: - Li Zhang updated official patch to fix wrong MAC address on wlan0 (PCI) interface V3->V4: - wire up sysupgrade Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [fix tab and trailing space, document what's working and what's not] Signed-off-by: TruongSinh Tran-Nguyen <i@truongsinh.pro> [rebase on top of master, address remaining comments] Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> [remove redundant check in platform.sh] Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2021-12-01 15:18:17 +00:00			`FEATURES+=emmc`
ipq40xx: cut ath10k board file for mikrotik subtarget Avoid shipping ath10k board file in Mikrotik initram images Most will only ever need to use these initram images once—to initially load OpenWrt, but fix these images for more consistent Wi-Fi performance between the initram and installed squashfs images. OpenWrt BUILDBOT config ignores -cut packages in the initram images build. This results in BUILDBOT initram images including the linux-firmware qca4019 board-2.bin, and (initram image booted) Mikrotik devices loading a generic BDF, rather than the intended BDF data loaded from NOR as an api 1 board_file. buildbot snapshot booted as initram image: cat /etc/openwrt_version r19679-810eac8c7f dmesg \| grep ath10k \| grep -E board\\|BDF [ 9.794556] ath10k_ahb a000000.wifi: Loading BDF type 0 [ 9.807192] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 11892f9b [ 12.457105] ath10k_ahb a800000.wifi: Loading BDF type 0 [ 12.464945] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 11892f9b CC: Robert Marko <robimarko@gmail.com> Fixes: 5eee67a72fed ("ipq40xx: mikrotik: dont include ath10k-board-qca4019 by default") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Reviewed-by: Robert Marko <robimarko@gmail.com> 2022-05-20 22:13:21 +00:00			`DEFAULT_PACKAGES += ath10k-board-qca4019`