openwrt/target/linux/generic/pending-6.1/860-serial-8250_mtk-track-busclk-state-to-avoid-bus-error.patch

From 629c701fc39f1ada9416e0766a86729e83bde86c Mon Sep 17 00:00:00 2001
Message-ID: <629c701fc39f1ada9416e0766a86729e83bde86c.1694465766.git.daniel@makrotopia.org>
From: Daniel Golle <daniel@makrotopia.org>
Date: Mon, 11 Sep 2023 21:27:44 +0100
Subject: [PATCH] serial: 8250_mtk: track busclk state to avoid bus error
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
    Jiri Slaby <jirislaby@kernel.org>,
    Matthias Brugger <matthias.bgg@gmail.com>,
    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
    Daniel Golle <daniel@makrotopia.org>,
    John Ogness <john.ogness@linutronix.de>,
    Chen-Yu Tsai <wenst@chromium.org>,
    Changqi Hu <changqi.hu@mediatek.com>,
    linux-kernel@vger.kernel.org,
    linux-serial@vger.kernel.org,
    linux-arm-kernel@lists.infradead.org,
    linux-mediatek@lists.infradead.org

Commit e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and
clock management") introduced polling a debug register to make sure
the UART is idle before disabling the bus clock. However, at least on
some MediaTek SoCs access to that very debug register requires the bus
clock being enabled. Hence calling the suspend function while already
in suspended state results in that register access triggering a bus
error. In order to avoid that, track the state of the bus clock and
only poll the debug register if not already in suspended state.

Fixes: e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/tty/serial/8250/8250_mtk.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -32,7 +32,7 @@
 #define MTK_UART_RXTRI_AD	0x14	/* RX Trigger address */
 #define MTK_UART_FRACDIV_L	0x15	/* Fractional divider LSB address */
 #define MTK_UART_FRACDIV_M	0x16	/* Fractional divider MSB address */
-#define MTK_UART_DEBUG0	0x18
+#define MTK_UART_DEBUG0		0x18
 #define MTK_UART_IER_XOFFI	0x20	/* Enable XOFF character interrupt */
 #define MTK_UART_IER_RTSI	0x40	/* Enable RTS Modem status interrupt */
 #define MTK_UART_IER_CTSI	0x80	/* Enable CTS Modem status interrupt */
@@ -422,13 +422,12 @@ static int __maybe_unused mtk8250_runtim
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(data->line);
 
-	/* wait until UART in idle status */
-	while
-		(serial_in(up, MTK_UART_DEBUG0));
-
 	if (data->clk_count == 0U) {
 		dev_dbg(dev, "%s clock count is 0\n", __func__);
 	} else {
+		/* wait until UART in idle status */
+		while
+			(serial_in(up, MTK_UART_DEBUG0));
 		clk_disable_unprepare(data->bus_clk);
 		data->clk_count--;
 	}