openwrt/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch

From 4e901018432e38eab35d2a352661ce4727795be1 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 17 Apr 2023 17:17:30 +0200
Subject: [PATCH 8/9] net: phy: phy_device: Call into the PHY driver to set LED
 blinking

Linux LEDs can be requested to perform hardware accelerated
blinking. Pass this to the PHY driver, if it implements the op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 18 ++++++++++++++++++
 include/linux/phy.h          | 12 ++++++++++++
 2 files changed, 30 insertions(+)

--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2959,6 +2959,22 @@ static int phy_led_set_brightness(struct
 	return err;
 }
 
+static int phy_led_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
+{
+	struct phy_led *phyled = to_phy_led(led_cdev);
+	struct phy_device *phydev = phyled->phydev;
+	int err;
+
+	mutex_lock(&phydev->lock);
+	err = phydev->drv->led_blink_set(phydev, phyled->index,
+					 delay_on, delay_off);
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+
 static int of_phy_led(struct phy_device *phydev,
 		      struct device_node *led)
 {
@@ -2981,6 +2997,8 @@ static int of_phy_led(struct phy_device
 
 	if (phydev->drv->led_brightness_set)
 		cdev->brightness_set_blocking = phy_led_set_brightness;
+	if (phydev->drv->led_blink_set)
+		cdev->blink_set = phy_led_blink_set;
 	cdev->max_brightness = 1;
 	init_data.devicename = dev_name(&phydev->mdio.dev);
 	init_data.fwnode = of_fwnode_handle(led);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -991,6 +991,18 @@ struct phy_driver {
 	 */
 	int (*led_brightness_set)(struct phy_device *dev,
 				  u8 index, enum led_brightness value);
+
+	/**
+	 * @led_blink_set: Set a PHY LED brightness.  Index indicates
+	 * which of the PHYs led should be configured to blink. Delays
+	 * are in milliseconds and if both are zero then a sensible
+	 * default should be chosen.  The call should adjust the
+	 * timings in that case and if it can't match the values
+	 * specified exactly.
+	 */
+	int (*led_blink_set)(struct phy_device *dev, u8 index,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off);
 };
 #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
 				      struct phy_driver, mdiodrv)