openwrt/target/linux/bcm27xx/patches-6.1/950-0355-input-edt-ft5x06-Only-look-at-the-number-of-points-r.patch

45 lines
1.4 KiB
Diff
Raw Normal View History

From 037324a6b9f331943f246fdf39c4ae58a6e8f287 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 30 Nov 2021 17:28:50 +0000
Subject: [PATCH] input: edt-ft5x06: Only look at the number of points
reported
Register 0x02 in the FT5x06 is TD_STATUS containing the number
of valid touch points being reported.
Iterate over that number of points rather than all that are
supported on the device.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/input/touchscreen/edt-ft5x06.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -212,6 +212,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int
unsigned int active_ids = 0, known_ids = tsdata->known_ids;
long released_ids;
int b = 0;
+ unsigned int num_points;
switch (tsdata->version) {
case EDT_M06:
@@ -260,9 +261,15 @@ static irqreturn_t edt_ft5x06_ts_isr(int
if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
goto out;
+ num_points = tsdata->max_support_points;
+ } else {
+ /* Register 2 is TD_STATUS, containing the number of touch
+ * points.
+ */
+ num_points = min(rdbuf[2] & 0xf, tsdata->max_support_points);
}
- for (i = 0; i < tsdata->max_support_points; i++) {
+ for (i = 0; i < num_points; i++) {
u8 *buf = &rdbuf[i * tplen + offset];
type = buf[0] >> 6;