ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
e22fba1694
openwrt/target/linux/x86/modules.mk

197 lines
5.5 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
x86: add kernel module for AMD CS5535/CS5536 audio chipset Add support for the integrated AC97 sound device on motherboards with AMD CS5535/CS5536 chipsets. Tested on Wyse Winterm S30. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-04 17:51:35 +00:00
#
# Copyright (C) 2017 Cezary Jackiewicz <cezary@eko.one.pll>
x86: add support for AWS T3 instances Amazon AWS T3 cloud instances require kernel support for the Elastic Fabric Adapter to access storage and for Elastic Network Adapter to use network interfaces. Since the Fabric Adapter is needed to access root filesystem, enable in x86_64 kernel. Elastic Network Adapter goes in a module, and add this module to default list in x86_64. The module is set to AutoLoad because AutoProbe does not seem to load it. Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
2021-02-06 19:25:32 +00:00
define KernelPackage/amazon-ena
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Elastic Network Adapter (for Amazon AWS T3)
DEPENDS:=@TARGET_x86_64
KCONFIG:=CONFIG_ENA_ETHERNET
FILES:=$(LINUX_DIR)/drivers/net/ethernet/amazon/ena/ena.ko
AUTOLOAD:=$(call AutoLoad,12,ena)
endef
define KernelPackage/amazon-ena/description
This driver supports Elastic Network Adapter (ENA)
used by Amazon AWS T3 instances.
endef
$(eval $(call KernelPackage,amazon-ena))
x86/64: Add support for AMD SOC Ethernet controller This feature is already supported in kernel. Add definition and configuration in Makefile of OpenWRT. It is tested on board Dibbler with processor V1605B. Dmesg is as below. -------------------------------------------- [ 0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 8.227270] libphy: amd-xgbe-mii: probed [ 8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled [ 8.228999] libphy: amd-xgbe-mii: probed [ 8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled ..... [ 11.760869] br-lan: port 1(eth0) entered blocking state [ 11.761365] br-lan: port 1(eth0) entered disabled state [ 11.762019] device eth0 entered promiscuous mode [ 11.785285] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full - flow control off [ 16.882108] br-lan: port 1(eth0) entered blocking state [ 16.882583] br-lan: port 1(eth0) entered forwarding state [ 16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ----------------------------------------------- Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
2021-04-13 04:46:17 +00:00
define KernelPackage/amd-xgbe
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=AMD Ethernet on SoC support
treewide: cleanup kernel symbol references We only use 5.15 kernel. So remove all those unnecessary symbols referencing 5.10 or 5.15 kernel. Can be found with: git grep -E 'LINUX_5_1(0|5)' Note that we remove the dependency from "sound-soc-chipdip-dac" instead of removing the complete kernel package. The 5.15 version bump forgot to delete the "@LINUX_5_10" dependency. The kernel package is still needed in 5.15 kernel. Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-05-04 20:47:27 +00:00
DEPENDS:=@PCI_SUPPORT @TARGET_x86_64 +kmod-lib-crc32c +kmod-ptp +kmod-libphy +kmod-mdio-devres
x86/64: Add support for AMD SOC Ethernet controller This feature is already supported in kernel. Add definition and configuration in Makefile of OpenWRT. It is tested on board Dibbler with processor V1605B. Dmesg is as below. -------------------------------------------- [ 0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 8.227270] libphy: amd-xgbe-mii: probed [ 8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled [ 8.228999] libphy: amd-xgbe-mii: probed [ 8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled ..... [ 11.760869] br-lan: port 1(eth0) entered blocking state [ 11.761365] br-lan: port 1(eth0) entered disabled state [ 11.762019] device eth0 entered promiscuous mode [ 11.785285] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full - flow control off [ 16.882108] br-lan: port 1(eth0) entered blocking state [ 16.882583] br-lan: port 1(eth0) entered forwarding state [ 16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ----------------------------------------------- Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
2021-04-13 04:46:17 +00:00
KCONFIG:=CONFIG_AMD_XGBE
FILES:=$(LINUX_DIR)/drivers/net/ethernet/amd/xgbe/amd-xgbe.ko
AUTOLOAD:=$(call AutoLoad,35,amd-xgbe)
endef
define KernelPackage/amd-xgbe/description
Kernel modules for AMD 10GbE Ethernet device on an AMD SoC.
endef
$(eval $(call KernelPackage,amd-xgbe))
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
define KernelPackage/f71808e-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=Fintek F718xx/F818xx Watchdog Timer
DEPENDS:=@TARGET_x86
linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdt The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-08-03 14:22:12 +00:00
KCONFIG:=\
CONFIG_F71808E_WDT \
CONFIG_WATCHDOG_CORE=y
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
FILES:=$(LINUX_DIR)/drivers/watchdog/f71808e_wdt.ko
AUTOLOAD:=$(call AutoProbe,f71808e-wdt,1)
endef
define KernelPackage/f71808e-wdt/description
Kernel module for the watchdog timer found on many Fintek Super-IO chips.
endef
$(eval $(call KernelPackage,f71808e-wdt))
x86: add kernel module for AMD CS5535/CS5536 audio chipset Add support for the integrated AC97 sound device on motherboards with AMD CS5535/CS5536 chipsets. Tested on Wyse Winterm S30. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-04 17:51:35 +00:00
define KernelPackage/sound-cs5535audio
TITLE:=CS5535/CS5536 Audio Controller
DEPENDS:=@TARGET_x86_geode +kmod-ac97
KCONFIG:=CONFIG_SND_CS5535AUDIO
FILES:=$(LINUX_DIR)/sound/pci/cs5535audio/snd-cs5535audio.ko
AUTOLOAD:=$(call AutoLoad,36,snd-cs5535audio)
$(call AddDepends/sound)
endef
define KernelPackage/sound-cs5535audio/description
Support for the integrated AC97 sound device on motherboards
with AMD CS5535/CS5536 chipsets.
endef
$(eval $(call KernelPackage,sound-cs5535audio))
x86: add kernel module for sp5100_tco watchdog This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-14 16:20:25 +00:00
x86: avoid underscore in package name As 07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows, underscores might cause build failures. Replace underscore with dash. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-02-23 04:05:35 +00:00
define KernelPackage/sp5100-tco
x86: add kernel module for sp5100_tco watchdog This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-14 16:20:25 +00:00
SUBMENU:=$(OTHER_MENU)
TITLE:=SP5100 Watchdog Support
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_SP5100_TCO
FILES:=$(LINUX_DIR)/drivers/watchdog/sp5100_tco.ko
AUTOLOAD:=$(call AutoLoad,50,sp5100_tco,1)
endef
x86: avoid underscore in package name As 07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows, underscores might cause build failures. Replace underscore with dash. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-02-23 04:05:35 +00:00
define KernelPackage/sp5100-tco/description
x86: add kernel module for sp5100_tco watchdog This change adds the sp5100_tco driver as a kernel module for the x86 target. Specifically, this can be used by the PCEngines APU2/APU3. The reason for having this as a kernel module is to allow users to load/unload it on demand, as the I2C interface on the APU2/APU3 will not work while this module is loaded. More info can be found on GitHub at https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-14 16:20:25 +00:00
Kernel module for the SP5100_TCO hardware watchdog.
endef
x86: avoid underscore in package name As 07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows, underscores might cause build failures. Replace underscore with dash. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-02-23 04:05:35 +00:00
$(eval $(call KernelPackage,sp5100-tco))
kernel: add pcengines-apu2 module description Add a module description for the new pcengnies-apu2 device driver. This driver supports the front button and LEDs on the PC Engines APUv2/APUv3 boards. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2019-07-02 10:04:58 +00:00
x86: add ib700wdt module for x86 qemu watchdogs QEMU+Libvirt can emulate the ib700wdt watchdogs which due to its I/O-Port mapping makes it x86 specific. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:25 +00:00
define KernelPackage/ib700-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=IB700 SBC Watchdog Timer
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_IB700_WDT
FILES:=$(LINUX_DIR)/drivers/watchdog/ib700wdt.ko
AUTOLOAD:=$(call AutoLoad,50,ib700wdt,1)
endef
define KernelPackage/ib700-wdt/description
Kernel module for the hardware watchdog on the IB700 Single
Board Computer produced by TMC Technology (www.tmc-uk.com).
Also used by QEMU/libvirt.
endef
$(eval $(call KernelPackage,ib700-wdt))
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
define KernelPackage/it87-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=ITE IT87 Watchdog Timer
DEPENDS:=@TARGET_x86
KCONFIG:=CONFIG_IT87_WDT
FILES:=$(LINUX_DIR)/drivers/watchdog/it87_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
MODPARAMS.it87-wdt:= \
nogameport=1 \
nocir=1
endef
define KernelPackage/it87-wdt/description
Kernel module for ITE IT87 Watchdog Timer
endef
$(eval $(call KernelPackage,it87-wdt))
define KernelPackage/itco-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=Intel iTCO Watchdog Timer
DEPENDS:=@TARGET_x86
linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdt The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-08-03 14:22:12 +00:00
KCONFIG:=\
CONFIG_ITCO_WDT \
CONFIG_ITCO_VENDOR_SUPPORT=y \
CONFIG_WATCHDOG_CORE=y
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
FILES:=$(LINUX_DIR)/drivers/watchdog/iTCO_wdt.ko \
$(LINUX_DIR)/drivers/watchdog/iTCO_vendor_support.ko
AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
endef
define KernelPackage/itco-wdt/description
Kernel module for Intel iTCO Watchdog Timer
endef
$(eval $(call KernelPackage,itco-wdt))
x86: add ib700wdt module for x86 qemu watchdogs QEMU+Libvirt can emulate the ib700wdt watchdogs which due to its I/O-Port mapping makes it x86 specific. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:25 +00:00
kernel: add pcengines-apu2 module description Add a module description for the new pcengnies-apu2 device driver. This driver supports the front button and LEDs on the PC Engines APUv2/APUv3 boards. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2019-07-02 10:04:58 +00:00
define KernelPackage/pcengines-apuv2
SUBMENU:=$(OTHER_MENU)
TITLE:=PC Engines APUv2/3 front button and LEDs driver
DEPENDS:=@TARGET_x86 +kmod-gpio-amd-fch +kmod-leds-gpio
KCONFIG:=CONFIG_PCENGINES_APU2
FILES:=$(LINUX_DIR)/drivers/platform/x86/pcengines-apuv2.ko
AUTOLOAD:=$(call AutoLoad,60,pcengines-apuv2)
endef
define KernelPackage/pcengines-apuv2/description
This driver provides support for the front button and LEDs on
PC Engines APUv2/APUv3 board.
endef
$(eval $(call KernelPackage,pcengines-apuv2))
x86: add support for Meraki MX100 This commit will add support for the Meraki MX100 in OpenWRT. Specs: * CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T * Memory: 4GB DDR3 1600 ECC * Storage: 1GB USB NAND, 1TB SATA HDD * Wireless: None * Wired: 10x 1Gb RJ45, 2x 1Gb SFP UART: The UART header is named CONN11 and is found in the center of the mainboard. The pinout from Pin 1 (marked with a black triangle) to pin 4 is below: Pin 1: VCC Pin 2: TX Pin 3: RX Pin 4: GND Note that VCC is not required for UART on this device. Booting: 1. Flash/burn one of the images from this repo to a flash drive. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Hook up UART to the MX100, plug in the USB drive, and then power up the device. 4. At the BIOS prompt, quickly press F7 and then scroll to the Save & Exit tab. 5. Scroll down to Boot Override, and select the UEFI entry for your jumpdrive. Note: UEFI booting will fail if the SATA cable for the HDD is plugged in. The issue is explained under the Flashing instructions. Flashing: 1. Ensure the MX100 is powered down, and not plugged into power. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Using the Mini USB female port found by the SATA port on the motherboard, flash one of the images to the system. Example: `dd if=image of=/dev/sdb conv=fdatasync` where sdb is the USB device for the MX100's NAND. 4. Unplug the Mini USB, hook up UART to the MX100, and then power up the device. 5. At the BIOS prompt, quickly press F7 and then scroll to the Boot tab. 6. Change the boot order and set UEFI: USB DISK 2.0 as first, and USB DISK 2.0 as second. Disable the other boot options. 7. Go to Save & Exit, and then select Save Changes and Reset Note that OpenWRT will fail to boot in UEFI mode when the SATA hard drive is plugged in. To fix this, boot with the SATA disk unplugged and then run the following command: `sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg` Once the above is ran, OpenWRT will boot when the HDD is plugged into SATA. The reason this happens is the UEFI implementation for the MX100 will always set anything on SATA to HD0 instead of the onboard USB storage, so we have to accomidate it since OpenWRT's GRUB does not support detecting a boot disk via UUID. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-10-01 14:38:56 +00:00
define KernelPackage/meraki-mx100
SUBMENU:=$(OTHER_MENU)
TITLE:=Cisco Meraki MX100 Platform Driver
gpio-cdev: move kmod-leds-uleds dependency to MX100 The inclusion of the kmod-leds-uleds into the userspace nu801 package causes a circular dependency inside the buildsystem... which causes it to be picked regardless of other DEPENDS values. In case of the mx100, this could be solved by moving the kmod-leds-uled dependency to the kmod-meraki-mx100. Bonus: drop @!LINUX_5_4 from kmod-meraki-mx100 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-27 13:04:29 +00:00
DEPENDS:=@TARGET_x86 +kmod-tg3 +kmod-gpio-button-hotplug +kmod-leds-gpio \
x86: detangle meraki-mx100 / nu801 build confusion Grommish reported the dreaded build error that happend with 5.4 since the kernel didn't have the cgpio v2 interface. His reason for the removed 5.4 was that the octeon target had a memory leak issue, so he had to backport the removed 5.4 kernel for his tests. Chen Minqiang chimed in and noted that no matter what (i.e. @TARGET_x86 in depends) didn't prevent the package from being build on other targets. From what I can tell, the reason for this was that +nu801 meant that kmod-meraki-mx100 pulled in an unconditional dependency as part of to the kernel build. |scripts/package-metadata.pl mk tmp/.packageinfo | |$(curdir)/kernel/linux/compile += $(curdir)/firmware/linux-firmware/compile \ | $(curdir)/firmware/prism54-firmware/compile \ | $(curdir)/kernel/gpio-button-hotplug/compile \ | >>> $(curdir)/system/gpio-cdev/nu801/compile <<< change this by making the dependency conditional on the meraki-mx100 module itself. Note that the nu801 enables/sets the KCONFIG for the cgpio v2 interface itself, since the userspace program and not the kernel meraki-mx100 relies on it. Reference: <https://github.com/openwrt/openwrt/commit/eeb8fd4ce7e9> Reported-by: Grommish <grommish@gmail.com> Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:35 +00:00
+kmod-usb-ledtrig-usbport +PACKAGE_kmod-meraki-mx100:nu801 +kmod-itco-wdt \
+kmod-leds-uleds
x86: add support for Meraki MX100 This commit will add support for the Meraki MX100 in OpenWRT. Specs: * CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T * Memory: 4GB DDR3 1600 ECC * Storage: 1GB USB NAND, 1TB SATA HDD * Wireless: None * Wired: 10x 1Gb RJ45, 2x 1Gb SFP UART: The UART header is named CONN11 and is found in the center of the mainboard. The pinout from Pin 1 (marked with a black triangle) to pin 4 is below: Pin 1: VCC Pin 2: TX Pin 3: RX Pin 4: GND Note that VCC is not required for UART on this device. Booting: 1. Flash/burn one of the images from this repo to a flash drive. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Hook up UART to the MX100, plug in the USB drive, and then power up the device. 4. At the BIOS prompt, quickly press F7 and then scroll to the Save & Exit tab. 5. Scroll down to Boot Override, and select the UEFI entry for your jumpdrive. Note: UEFI booting will fail if the SATA cable for the HDD is plugged in. The issue is explained under the Flashing instructions. Flashing: 1. Ensure the MX100 is powered down, and not plugged into power. 2. Take the top off the MX100, and unplug the SATA cable from the HDD. 3. Using the Mini USB female port found by the SATA port on the motherboard, flash one of the images to the system. Example: `dd if=image of=/dev/sdb conv=fdatasync` where sdb is the USB device for the MX100's NAND. 4. Unplug the Mini USB, hook up UART to the MX100, and then power up the device. 5. At the BIOS prompt, quickly press F7 and then scroll to the Boot tab. 6. Change the boot order and set UEFI: USB DISK 2.0 as first, and USB DISK 2.0 as second. Disable the other boot options. 7. Go to Save & Exit, and then select Save Changes and Reset Note that OpenWRT will fail to boot in UEFI mode when the SATA hard drive is plugged in. To fix this, boot with the SATA disk unplugged and then run the following command: `sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg` Once the above is ran, OpenWRT will boot when the HDD is plugged into SATA. The reason this happens is the UEFI implementation for the MX100 will always set anything on SATA to HD0 instead of the onboard USB storage, so we have to accomidate it since OpenWRT's GRUB does not support detecting a boot disk via UUID. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-10-01 14:38:56 +00:00
KCONFIG:=CONFIG_MERAKI_MX100
FILES:=$(LINUX_DIR)/drivers/platform/x86/meraki-mx100.ko
AUTOLOAD:=$(call AutoLoad,60,meraki-mx100,1)
endef
define KernelPackage/meraki-mx100/description
This driver provides support for the front button and LEDs on
the Cisco Meraki MX100 (Tinkerbell) 1U appliance. Note this also
selects the gpio-cdev nu801 userspace driver to support the Status
LED, as well as other required platform drivers.
endef
$(eval $(call KernelPackage,meraki-mx100))
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
define KernelPackage/w83627hf-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=Winbond 83627HF Watchdog Timer
DEPENDS:=@TARGET_x86
linux/x86: add missing CONFIG_WATCHDOG_CORE to *-wdt The packages also need a dependency to watchdog core. This commit adds the needed WATCHDOG_CORE dependency. https://github.com/torvalds/linux/blob/master/drivers/watchdog/Kconfig Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-08-03 14:22:12 +00:00
KCONFIG:=\
CONFIG_W83627HF_WDT \
kernel/x86: fix typo Fix typo for KernelPackage w83627hf-wdt. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2023-01-13 14:30:02 +00:00
CONFIG_WATCHDOG_CORE=y
kernel/x86: move x86' specific watchdogs to the x86 target upstream linux have these watchdogs locked behind X86. These will not build on other architectures. So move them to target/linux/x86/modules.mk drivers/watchdog/Kconfig: |config F71808E_WDT | tristate "Fintek F718xx, F818xx Super I/O Watchdog" | depends on X86 |[...] |config IT87_WDT | tristate "IT87 Watchdog Timer" | depends on X86 |[...] |config ITCO_WDT | tristate "Intel TCO Timer/Watchdog" | depends on (X86 || IA64) && PCI |[...] |config W83627HF_WDT | tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" | depends on X86 |[...] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-01 12:10:43 +00:00
FILES:=$(LINUX_DIR)/drivers/watchdog/w83627hf_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
endef
define KernelPackage/w83627hf-wdt/description
Kernel module for Winbond 83627HF Watchdog Timer
endef
$(eval $(call KernelPackage,w83627hf-wdt))
Reference in New Issue Copy Permalink