openwrt/target/linux/bcm27xx/patches-5.15/950-0680-dtoverlays-Rework-vc4-kms-dpi-overlays-to-remove-dup.patch

From 2cc810fd22f30acabbf5e6726e003c5da56d3212 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 31 Jan 2022 17:25:19 +0000
Subject: [PATCH] dtoverlays: Rework vc4-kms-dpi overlays to remove
 duplication

Removes all the common panel, dpi, and backlight configuration
from the individual vc4-kms-dpi-* files into vc4-kms-dpi.dtsi.

Creates a new vc4-kms-dpi-panel-overlay.dts for preconfigured
panels, with overrides to enable the different panel configurations.

Deprecates vc4-kms-dpi-at056tn53v1 as superceded by vc4-kms-dpi-panel.
vc4-kms-kippah-7inch not deprecated for now as it is likely to be
in wider use than at056tn53v1.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |   2 +-
 arch/arm/boot/dts/overlays/README             |  33 ++++-
 arch/arm/boot/dts/overlays/overlay_map.dts    |   4 +
 .../vc4-kms-dpi-at056tn53v1-overlay.dts       |  44 ------
 .../overlays/vc4-kms-dpi-generic-overlay.dts  | 138 ++++--------------
 .../overlays/vc4-kms-dpi-panel-overlay.dts    |  62 ++++++++
 arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi   | 109 ++++++++++++++
 .../overlays/vc4-kms-kippah-7inch-overlay.dts |  27 +---
 8 files changed, 235 insertions(+), 184 deletions(-)
 delete mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-at056tn53v1-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -234,8 +234,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	upstream-pi4.dtbo \
 	vc4-fkms-v3d.dtbo \
 	vc4-fkms-v3d-pi4.dtbo \
-	vc4-kms-dpi-at056tn53v1.dtbo \
 	vc4-kms-dpi-generic.dtbo \
+	vc4-kms-dpi-panel.dtbo \
 	vc4-kms-dsi-7inch.dtbo \
 	vc4-kms-dsi-lt070me05000.dtbo \
 	vc4-kms-dsi-lt070me05000-v2.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3624,10 +3624,8 @@ Params: cma-512                 CMA is 5
 
 
 Name:   vc4-kms-dpi-at056tn53v1
-Info:   Enable an Innolux 5.6in VGA TFT connected to DPI interface under KMS.
-        Requires vc4-kms-v3d to be loaded.
-Load:   dtoverlay=vc4-kms-dpi-at056tn53v1
-Params: <None>
+Info:   This overlay is now deprecated - see vc4-kms-dpi-panel,at056tn53v1
+Load:   <Deprecated>
 
 
 Name:   vc4-kms-dpi-generic
@@ -3659,6 +3657,33 @@ Params: clock-frequency         Display
         backlight-gpio          Defines a GPIO to be used for backlight control
                                 (default of none).
         backlight-pwm           Defines a PWM channel to be used for backlight
+                                control (default of none). NB Disables audio
+                                headphone output as that also uses PWM.
+        backlight-pwm-chan      Choose channel on &pwm node for backlight
+                                control.
+                                (default 0).
+        backlight-pwm-gpio      GPIO pin to be used for the PWM backlight. See
+                                pwm-2chan for valid options.
+                                (default 18 - note this can only work with
+                                 rgb666-padhi).
+        backlight-pwm-func      Pin function of GPIO used for the PWM
+                                backlight.
+                                See pwm-2chan for valid options.
+                                (default 2).
+        backlight-def-brightness
+                                Set the default brightness. Normal range 1-16.
+                                (default 16).
+
+
+Name:   vc4-kms-dpi-panel
+Info:   Enable a preconfigured KMS DPI panel.
+        Requires vc4-kms-v3d to be loaded.
+Load:   dtoverlay=vc4-kms-dpi-panel,<param>=<val>
+Params: at056tn53v1             Enable an Innolux 5.6in VGA TFT
+        kippah-7inch            Enable an Adafruit Kippah with 7inch panel.
+        backlight-gpio          Defines a GPIO to be used for backlight control
+                                (default of none).
+        backlight-pwm           Defines a PWM channel to be used for backlight
                                 control (default of none). NB Disables audio
                                 headphone output as that also uses PWM.
         backlight-pwm-chan      Choose channel on &pwm node for backlight
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
@@ -151,6 +151,10 @@
 		bcm2711;
 	};
 
+	vc4-kms-dpi-at056tn53v1 {
+		deprecated = "use vc4-kms-dpi-panel,at056tn53v1";
+	};
+
 	vc4-kms-v3d {
 		bcm2835;
 		bcm2711 = "vc4-kms-v3d-pi4";
--- a/arch/arm/boot/dts/overlays/vc4-kms-dpi-at056tn53v1-overlay.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * vc4-kms-dpi-at056tn53v1-overlay.dts
- */
-
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/bcm2835.h>
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	fragment@0 {
-		target-path = "/";
-		__overlay__ {
-			panel: panel {
-				compatible = "innolux,at056tn53v1", "simple-panel";
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dpi_out>;
-					};
-				};
-			};
-		};
-	};
-
-	fragment@1 {
-		target = <&dpi>;
-		__overlay__  {
-			status = "okay";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&dpi_18bit_cpadhi_gpio0>;
-
-			port {
-				dpi_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-};
--- a/arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts
@@ -5,124 +5,43 @@
 /dts-v1/;
 /plugin/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/bcm2835.h>
+#include "vc4-kms-dpi.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
 
 	fragment@0 {
-		target-path = "/";
-		__overlay__ {
-			panel: panel {
-				compatible = "panel-dpi";
-
-				width-mm = <154>;
-				height-mm = <83>;
-				bus-format = <0x1009>;
-
-				timing: panel-timing {
-					clock-frequency = <29500000>;
-					hactive = <800>;
-					hfront-porch = <24>;
-					hsync-len = <72>;
-					hback-porch = <96>;
-					hsync-active = <1>;
-					vactive = <480>;
-					vfront-porch = <3>;
-					vsync-len = <10>;
-					vback-porch = <7>;
-					vsync-active = <1>;
-
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dpi_out>;
-					};
-				};
-			};
-		};
-	};
-
-	fragment@1 {
-		target = <&dpi>;
-		dpi_node: __overlay__  {
-			status = "okay";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&dpi_18bit_gpio0>;
-
-			port {
-				dpi_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
-
-	fragment@2 {
-		target = <&panel>;
-		__dormant__  {
-			backlight = <&backlight>;
-		};
-	};
-
-	fragment@3 {
-		target-path = "/";
-		__dormant__  {
-			backlight: backlight {
-				compatible = "gpio-backlight";
-				gpios = <&gpio 255 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-
-	fragment@4 {
 		target = <&panel>;
-		__dormant__  {
-			backlight = <&backlight_pwm>;
-		};
-	};
-
-	fragment@5 {
-		target-path = "/";
-		__dormant__  {
-			backlight_pwm: backlight_pwm {
-				compatible = "pwm-backlight";
-				brightness-levels = <0 6 8 12 16 24 32 40 48 64 96 128 160 192 224 255>;
-				default-brightness-level = <16>;
-				pwms = <&pwm 0 200000>;
-			};
-		};
-	};
+		__overlay__  {
+			compatible = "panel-dpi";
 
-	fragment@6 {
-		target = <&pwm>;
-		__dormant__ {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm_pins>;
-			assigned-clock-rates = <1000000>;
-			status = "okay";
-		};
-	};
+			width-mm = <154>;
+			height-mm = <83>;
+			bus-format = <0x1009>;
+
+			timing: panel-timing {
+				clock-frequency = <29500000>;
+				hactive = <800>;
+				hfront-porch = <24>;
+				hsync-len = <72>;
+				hback-porch = <96>;
+				hsync-active = <1>;
+				vactive = <480>;
+				vfront-porch = <3>;
+				vsync-len = <10>;
+				vback-porch = <7>;
+				vsync-active = <1>;
 
-	fragment@7 {
-		target = <&gpio>;
-		__dormant__ {
-			pwm_pins: pwm_pins {
-				brcm,pins = <18>;
-				brcm,function = <2>; /* Alt5 */
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
 
-	fragment@8 {
-		target = <&audio>;
-		__dormant__  {
-		    brcm,disable-headphones;
+	fragment@1 {
+		target = <&dpi>;
+		__overlay__  {
+			pinctrl-0 = <&dpi_18bit_gpio0>;
 		};
 	};
 
@@ -151,12 +70,5 @@
 		rgb888 = <&panel>, "bus-format:0=0x100a",
 			<&dpi_node>, "pinctrl-0:0=",<&dpi_gpio0>;
 		bus-format = <&panel>, "bus-format:0";
-		backlight-gpio = <0>, "+2+3",
-			<&backlight>, "gpios:4";
-		backlight-pwm = <0>, "+4+5+6+7+8";
-		backlight-pwm-chan = <&backlight_pwm>, "pwms:4";
-		backlight-pwm-gpio = <&pwm_pins>, "brcm,pins:0";
-		backlight-pwm-func = <&pwm_pins>, "brcm,function:0";
-		backlight-def-brightness = <&backlight_pwm>, "default-brightness-level:0";
 	};
 };
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts
@@ -0,0 +1,62 @@
+/*
+ * vc4-kms-dpi-panel-overlay.dts
+ * Support for any predefined DPI panel.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "vc4-kms-dpi.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&panel>;
+		__dormant__  {
+			compatible = "innolux,at056tn53v1", "simple-panel";
+		};
+	};
+	fragment@1 {
+		target = <&panel>;
+		__dormant__  {
+			compatible = "ontat,yx700wv03", "simple-panel";
+		};
+	};
+
+	fragment@90 {
+		target = <&dpi>;
+		__dormant__  {
+			pinctrl-0 = <&dpi_18bit_cpadhi_gpio0>;
+		};
+	};
+	fragment@91 {
+		target = <&dpi>;
+		__dormant__  {
+			pinctrl-0 = <&dpi_18bit_gpio0>;
+		};
+	};
+	fragment@92 {
+		target = <&dpi>;
+		__dormant__  {
+			pinctrl-0 = <&dpi_gpio0>;
+		};
+	};
+	fragment@93 {
+		target = <&dpi>;
+		__dormant__  {
+			pinctrl-0 = <&dpi_16bit_cpadhi_gpio0>;
+		};
+	};
+	fragment@94 {
+		target = <&dpi>;
+		__dormant__  {
+			pinctrl-0 = <&dpi_16bit_gpio0>;
+		};
+	};
+
+	__overrides__ {
+		at056tn53v1 = <0>, "+0+90";
+		kippah-7inch = <0>, "+1+91";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi
@@ -0,0 +1,109 @@
+/*
+ * vc4-kms-dpi.dtsi
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/bcm2835.h>
+
+/ {
+	fragment@100 {
+		target-path = "/";
+		__overlay__ {
+			panel: panel {
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dpi_out>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@101 {
+		target = <&dpi>;
+		dpi_node: __overlay__  {
+			status = "okay";
+
+			pinctrl-names = "default";
+
+			port {
+				dpi_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	fragment@102 {
+		target = <&panel>;
+		__dormant__  {
+			backlight = <&backlight>;
+		};
+	};
+
+	fragment@103 {
+		target-path = "/";
+		__dormant__  {
+			backlight: backlight {
+				compatible = "gpio-backlight";
+				gpios = <&gpio 255 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+
+	fragment@104 {
+		target = <&panel>;
+		__dormant__  {
+			backlight = <&backlight_pwm>;
+		};
+	};
+
+	fragment@105 {
+		target-path = "/";
+		__dormant__  {
+			backlight_pwm: backlight_pwm {
+				compatible = "pwm-backlight";
+				brightness-levels = <0 6 8 12 16 24 32 40 48 64 96 128 160 192 224 255>;
+				default-brightness-level = <16>;
+				pwms = <&pwm 0 200000>;
+			};
+		};
+	};
+
+	fragment@106 {
+		target = <&pwm>;
+		__dormant__ {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pins>;
+			assigned-clock-rates = <1000000>;
+			status = "okay";
+		};
+	};
+
+	fragment@107 {
+		target = <&gpio>;
+		__dormant__ {
+			pwm_pins: pwm_pins {
+				brcm,pins = <18>;
+				brcm,function = <2>; /* Alt5 */
+			};
+		};
+	};
+
+	fragment@108 {
+		target = <&audio>;
+		__dormant__  {
+		    brcm,disable-headphones;
+		};
+	};
+
+	__overrides__ {
+		backlight-gpio = <0>, "+102+103",
+			<&backlight>, "gpios:4";
+		backlight-pwm = <0>, "+104+105+106+107+108";
+		backlight-pwm-chan = <&backlight_pwm>, "pwms:4";
+		backlight-pwm-gpio = <&pwm_pins>, "brcm,pins:0";
+		backlight-pwm-func = <&pwm_pins>, "brcm,function:0";
+		backlight-def-brightness = <&backlight_pwm>, "default-brightness-level:0";
+	};
+};
--- a/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
@@ -1,43 +1,26 @@
 /*
- * vc4-kms-v3d-overlay.dts
+ * vc4-kms-kippah-7inch-overlay.dts
  */
 
 /dts-v1/;
 /plugin/;
 
-#include <dt-bindings/pinctrl/bcm2835.h>
+#include "vc4-kms-dpi.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
 
 	fragment@0 {
-		target-path = "/";
-		__overlay__ {
-			panel: panel {
-				compatible = "ontat,yx700wv03", "simple-panel";
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dpi_out>;
-					};
-				};
-			};
+		target = <&panel>;
+		__overlay__  {
+			compatible = "ontat,yx700wv03", "simple-panel";
 		};
 	};
 
 	fragment@1 {
 		target = <&dpi>;
 		__overlay__  {
-			status = "okay";
-
-			pinctrl-names = "default";
 			pinctrl-0 = <&dpi_18bit_gpio0>;
-
-			port {
-				dpi_out: endpoint@0 {
-					remote-endpoint = <&panel_in>;
-				};
-			};
 		};
 	};
 };