openwrt/target/linux/bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch

From 4dd1101f3e16e6202132ae34a8da2a7d78043d56 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Thu, 3 Dec 2020 14:25:39 +0100
Subject: [PATCH] drm/vc4: dsi: Introduce a variant structure

Commit d1d195ce26a14ec0a87816c09ae514e1c40e97f7 upstream.

Most of the differences between DSI0 and DSI1 are handled through the
ID. However, the BCM2711 DSI is going to introduce one more variable to
the mix and will break some expectations of the earlier, simpler, test.

Let's add a variant structure that will address most of the differences
between those three controllers.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-5-maxime@cerno.tech
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 63 ++++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 26 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -493,6 +493,18 @@
  */
 #define DSI1_ID			0x8c
 
+struct vc4_dsi_variant {
+	/* Whether we're on bcm2835's DSI0 or DSI1. */
+	unsigned int port;
+
+	bool broken_axi_workaround;
+
+	const char *debugfs_name;
+	const struct debugfs_reg32 *regs;
+	size_t nregs;
+
+};
+
 /* General DSI hardware state. */
 struct vc4_dsi {
 	struct platform_device *pdev;
@@ -509,8 +521,7 @@ struct vc4_dsi {
 	u32 *reg_dma_mem;
 	dma_addr_t reg_paddr;
 
-	/* Whether we're on bcm2835's DSI0 or DSI1. */
-	int port;
+	const struct vc4_dsi_variant *variant;
 
 	/* DSI channel for the panel we're connected to. */
 	u32 channel;
@@ -586,10 +597,10 @@ dsi_dma_workaround_write(struct vc4_dsi
 #define DSI_READ(offset) readl(dsi->regs + (offset))
 #define DSI_WRITE(offset, val) dsi_dma_workaround_write(dsi, offset, val)
 #define DSI_PORT_READ(offset) \
-	DSI_READ(dsi->port ? DSI1_##offset : DSI0_##offset)
+	DSI_READ(dsi->variant->port ? DSI1_##offset : DSI0_##offset)
 #define DSI_PORT_WRITE(offset, val) \
-	DSI_WRITE(dsi->port ? DSI1_##offset : DSI0_##offset, val)
-#define DSI_PORT_BIT(bit) (dsi->port ? DSI1_##bit : DSI0_##bit)
+	DSI_WRITE(dsi->variant->port ? DSI1_##offset : DSI0_##offset, val)
+#define DSI_PORT_BIT(bit) (dsi->variant->port ? DSI1_##bit : DSI0_##bit)
 
 /* VC4 DSI encoder KMS struct */
 struct vc4_dsi_encoder {
@@ -837,7 +848,7 @@ static void vc4_dsi_encoder_enable(struc
 
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret) {
-		DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->port);
+		DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->variant->port);
 		return;
 	}
 
@@ -871,7 +882,7 @@ static void vc4_dsi_encoder_enable(struc
 	DSI_PORT_WRITE(STAT, DSI_PORT_READ(STAT));
 
 	/* Set AFE CTR00/CTR1 to release powerdown of analog. */
-	if (dsi->port == 0) {
+	if (dsi->variant->port == 0) {
 		u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) |
 			     VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ));
 
@@ -1017,7 +1028,7 @@ static void vc4_dsi_encoder_enable(struc
 		       DSI_PORT_BIT(PHYC_CLANE_ENABLE) |
 		       ((dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ?
 			0 : DSI_PORT_BIT(PHYC_HS_CLK_CONTINUOUS)) |
-		       (dsi->port == 0 ?
+		       (dsi->variant->port == 0 ?
 			VC4_SET_FIELD(lpx - 1, DSI0_PHYC_ESC_CLK_LPDT) :
 			VC4_SET_FIELD(lpx - 1, DSI1_PHYC_ESC_CLK_LPDT)));
 
@@ -1043,13 +1054,13 @@ static void vc4_dsi_encoder_enable(struc
 		       DSI_DISP1_ENABLE);
 
 	/* Ungate the block. */
-	if (dsi->port == 0)
+	if (dsi->variant->port == 0)
 		DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0);
 	else
 		DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN);
 
 	/* Bring AFE out of reset. */
-	if (dsi->port == 0) {
+	if (dsi->variant->port == 0) {
 	} else {
 		DSI_PORT_WRITE(PHY_AFEC0,
 			       DSI_PORT_READ(PHY_AFEC0) &
@@ -1305,8 +1316,16 @@ static const struct drm_encoder_helper_f
 	.mode_fixup = vc4_dsi_encoder_mode_fixup,
 };
 
+static const struct vc4_dsi_variant bcm2835_dsi1_variant = {
+	.port			= 1,
+	.broken_axi_workaround	= true,
+	.debugfs_name		= "dsi1_regs",
+	.regs			= dsi1_regs,
+	.nregs			= ARRAY_SIZE(dsi1_regs),
+};
+
 static const struct of_device_id vc4_dsi_dt_match[] = {
-	{ .compatible = "brcm,bcm2835-dsi1", (void *)(uintptr_t)1 },
+	{ .compatible = "brcm,bcm2835-dsi1", &bcm2835_dsi1_variant },
 	{}
 };
 
@@ -1317,7 +1336,7 @@ static void dsi_handle_error(struct vc4_
 	if (!(stat & bit))
 		return;
 
-	DRM_ERROR("DSI%d: %s error\n", dsi->port, type);
+	DRM_ERROR("DSI%d: %s error\n", dsi->variant->port, type);
 	*ret = IRQ_HANDLED;
 }
 
@@ -1415,7 +1434,7 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi *
 		int ret;
 
 		snprintf(clk_name, sizeof(clk_name),
-			 "dsi%u_%s", dsi->port, phy_clocks[i].name);
+			 "dsi%u_%s", dsi->variant->port, phy_clocks[i].name);
 
 		/* We just use core fixed factor clock ops for the PHY
 		 * clocks.  The clocks are actually gated by the
@@ -1463,7 +1482,7 @@ static int vc4_dsi_bind(struct device *d
 	if (!match)
 		return -ENODEV;
 
-	dsi->port = (uintptr_t)match->data;
+	dsi->variant = match->data;
 
 	vc4_dsi_encoder = devm_kzalloc(dev, sizeof(*vc4_dsi_encoder),
 				       GFP_KERNEL);
@@ -1480,13 +1499,8 @@ static int vc4_dsi_bind(struct device *d
 		return PTR_ERR(dsi->regs);
 
 	dsi->regset.base = dsi->regs;
-	if (dsi->port == 0) {
-		dsi->regset.regs = dsi0_regs;
-		dsi->regset.nregs = ARRAY_SIZE(dsi0_regs);
-	} else {
-		dsi->regset.regs = dsi1_regs;
-		dsi->regset.nregs = ARRAY_SIZE(dsi1_regs);
-	}
+	dsi->regset.regs = dsi->variant->regs;
+	dsi->regset.nregs = dsi->variant->nregs;
 
 	if (DSI_PORT_READ(ID) != DSI_ID_VALUE) {
 		dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n",
@@ -1498,7 +1512,7 @@ static int vc4_dsi_bind(struct device *d
 	 * from the ARM.  It does handle writes from the DMA engine,
 	 * so set up a channel for talking to it.
 	 */
-	if (dsi->port == 1) {
+	if (dsi->variant->broken_axi_workaround) {
 		dsi->reg_dma_mem = dma_alloc_coherent(dev, 4,
 						      &dsi->reg_dma_paddr,
 						      GFP_KERNEL);
@@ -1619,10 +1633,7 @@ static int vc4_dsi_bind(struct device *d
 	 */
 	list_splice_init(&dsi->encoder->bridge_chain, &dsi->bridge_chain);
 
-	if (dsi->port == 0)
-		vc4_debugfs_add_regset32(drm, "dsi0_regs", &dsi->regset);
-	else
-		vc4_debugfs_add_regset32(drm, "dsi1_regs", &dsi->regset);
+	vc4_debugfs_add_regset32(drm, dsi->variant->debugfs_name, &dsi->regset);
 
 	pm_runtime_enable(dev);