openwrt/package/mac80211/patches/546-ath9k_cleanup_ar9287_settings.patch

118 lines
4.0 KiB
Diff
Raw Normal View History

--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -499,45 +499,6 @@ void ar9002_hw_enable_async_fifo(struct
}
}
-/*
- * If Async FIFO is enabled, the following counters change as MAC now runs
- * at 117 Mhz instead of 88/44MHz when async FIFO is disabled.
- *
- * The values below tested for ht40 2 chain.
- * Overwrite the delay/timeouts initialized in process ini.
- */
-void ar9002_hw_update_async_fifo(struct ath_hw *ah)
-{
- if (AR_SREV_9287_13_OR_LATER(ah)) {
- REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
- AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_D_GBL_IFS_SLOT,
- AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_D_GBL_IFS_EIFS,
- AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR);
-
- REG_WRITE(ah, AR_TIME_OUT, AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR);
- REG_WRITE(ah, AR_USEC, AR_USEC_ASYNC_FIFO_DUR);
-
- REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
- AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
- REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
- AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
- }
-}
-
-/*
- * We don't enable WEP aggregation on mac80211 but we keep this
- * around for HAL unification purposes.
- */
-void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah)
-{
- if (AR_SREV_9287_13_OR_LATER(ah)) {
- REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
- AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
- }
-}
-
/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
void ar9002_hw_attach_ops(struct ath_hw *ah)
{
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1641,9 +1641,13 @@ int ath9k_hw_reset(struct ath_hw *ah, st
ath9k_hw_init_global_settings(ah);
- if (!AR_SREV_9300_20_OR_LATER(ah)) {
- ar9002_hw_update_async_fifo(ah);
- ar9002_hw_enable_wep_aggregation(ah);
+ if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) {
+ REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
+ AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
+ REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
+ AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
+ REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
+ AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
}
REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -984,8 +984,6 @@ void ath9k_hw_get_delta_slope_vals(struc
void ar9002_hw_cck_chan14_spread(struct ath_hw *ah);
int ar9002_hw_rf_claim(struct ath_hw *ah);
void ar9002_hw_enable_async_fifo(struct ath_hw *ah);
-void ar9002_hw_update_async_fifo(struct ath_hw *ah);
-void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah);
/*
* Code specific to AR9003, we stuff these here to avoid callbacks
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -600,7 +600,6 @@
#define AR_D_GBL_IFS_SIFS 0x1030
#define AR_D_GBL_IFS_SIFS_M 0x0000FFFF
-#define AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR 0x000003AB
#define AR_D_GBL_IFS_SIFS_RESV0 0xFFFFFFFF
#define AR_D_TXBLK_BASE 0x1038
@@ -616,12 +615,10 @@
#define AR_D_GBL_IFS_SLOT 0x1070
#define AR_D_GBL_IFS_SLOT_M 0x0000FFFF
#define AR_D_GBL_IFS_SLOT_RESV0 0xFFFF0000
-#define AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR 0x00000420
#define AR_D_GBL_IFS_EIFS 0x10b0
#define AR_D_GBL_IFS_EIFS_M 0x0000FFFF
#define AR_D_GBL_IFS_EIFS_RESV0 0xFFFF0000
-#define AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR 0x0000A5EB
#define AR_D_GBL_IFS_MISC 0x10f0
#define AR_D_GBL_IFS_MISC_LFSR_SLICE_SEL 0x00000007
@@ -1477,7 +1474,6 @@ enum {
#define AR_TIME_OUT_ACK_S 0
#define AR_TIME_OUT_CTS 0x3FFF0000
#define AR_TIME_OUT_CTS_S 16
-#define AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR 0x16001D56
#define AR_RSSI_THR 0x8018
#define AR_RSSI_THR_MASK 0x000000FF
@@ -1493,7 +1489,6 @@ enum {
#define AR_USEC_TX_LAT_S 14
#define AR_USEC_RX_LAT 0x1F800000
#define AR_USEC_RX_LAT_S 23
-#define AR_USEC_ASYNC_FIFO_DUR 0x12e00074
#define AR_RESET_TSF 0x8020
#define AR_RESET_TSF_ONCE 0x01000000