ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 18:47:06 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
e04533ae7b
openwrt/target/linux/bmips/image/bcm63268.mk

117 lines
2.9 KiB
Makefile
Raw Normal View History

bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
bmips: add support for Comtrend VG-8050 The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM63169 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 128 MB DDR - Flash: 128 MB NAND - LAN switch: Broadcom BCM53125, 5x 1Gbit - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 2x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-15 16:16:21 +00:00
define Device/comtrend_vg-8050
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VG-8050
CHIP_ID := 63268
SOC := bcm63169
CFE_RAM_FILE := comtrend,vg-8050/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
kmod-leds-bcm6328
CFE_WFI_FLASH_TYPE := 3
CFE_WFI_VERSION := 0x5732
endef
TARGET_DEVICES += comtrend_vg-8050
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
define Device/comtrend_vr-3032u
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VR-3032u
CHIP_ID := 63268
SOC := bcm63168
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
kmod-leds-bcm6328
CFE_WFI_FLASH_TYPE := 3
CFE_WFI_VERSION := 0x5732
endef
TARGET_DEVICES += comtrend_vr-3032u
define Device/sercomm_h500-s-lowi
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := lowi
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1434b31
SERCOMM_SWVER := 3305
endef
TARGET_DEVICES += sercomm_h500-s-lowi
define Device/sercomm_h500-s-vfes
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := vfes
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 142584b
SERCOMM_SWVER := 3417
endef
TARGET_DEVICES += sercomm_h500-s-vfes
define Device/sercomm_shg2500
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := SHG2500
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63168
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
bmips: shg2500: add BCM4360 fallback SPROM Apart from the embedded BCM63268 wireless, this device has an external BCM4360 connected by PCIe which needs a fallback SPROM. b43 isn't enabled for this device because BCM4360 isn't supported (AC PHY). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-23 09:44:34 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) \
broadcom-4360-sprom \
kmod-i2c-gpio kmod-leds-sercomm-msp430
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1424e4a
SERCOMM_SWVER := 3207
endef
TARGET_DEVICES += sercomm_shg2500
bmips: add support for SmartRG SR505n Specifications: - SoC: Broadcom BCM63168 dual 400MHz MIPS - Flash: 16MB SPI NOR W25Q128WFG - RAM: 128MB DDR3 W631GG6KB-15 - Ethernet: 1x 1000M, 3x 100M - Wifi: BCM435F - 1x USB 2.0 port - 3x Button - 12x LED Flashing via serial - Connect to the 3.3V TTL UART on the board (J6 pinout Vcc Rx Tx Gnd) at 115200-8-N-1 - Press any key in the serial console when powering up the board to enter the CFE prompt - Configure an interface on your workstation to static IP 192.168.1.100 and connect it to the board - Start a TFTP server with the firmware image - On the CFE prompt, enter the command "f 192.168.1.100:openwrt-bmips-bcm63268-smartrg_sr505n-squashfs-cfe.bin" Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> [Remove unneeded LED labels] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-18 20:26:38 +00:00
define Device/smartrg_sr505n
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := SmartRG
DEVICE_MODEL := SR505n
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
CHIP_ID := 63268
SOC := bcm63168
CFE_BOARD_ID := 963168MBV_17AZZ
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
kmod-leds-bcm6328
endef
TARGET_DEVICES += smartrg_sr505n
Reference in New Issue Copy Permalink