openwrt/target/linux/bcm53xx/patches-5.15/031-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch

From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 23 Dec 2021 00:17:17 +0100
Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus
 RT-AC88U"

This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
a build regression:

arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 --------------------
 1 file changed, 77 deletions(-)

--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,83 +93,6 @@
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	switch {
-		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		realtek,disable-leds;
-		dsa,member = <1 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-				phy-handle = <&ethphy0>;
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan6";
-				phy-handle = <&ethphy1>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&ethphy2>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan8";
-				phy-handle = <&ethphy3>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "cpu";
-				ethernet = <&sw0_p5>;
-				phy-mode = "rgmii";
-				tx-internal-delay-ps = <2000>;
-				rx-internal-delay-ps = <2100>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-					pause;
-				};
-			};
-		};
-
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-		};
-	};
 };
 
 &srab {