openwrt/target/linux/generic/backport-6.1/795-v6.7-16-r8152-use-napi_gro_frags.patch

123 lines
3.5 KiB
Diff
Raw Normal View History

kernel: backport fixes for realtek r8152 Fixes issues with RTL8156 2.5G USB adapters - # ethtool eth1 Settings for eth1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 2500Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0x00000007 (7) drv probe link Link detected: yes - # - r8152: break the loop when the budget is exhausted - r8152: Block future register access if register access fails - r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE - r8152: add vendor/device ID pair for D-Link DUB-E250 - r8152: try to use a normal budget - r8152: set bp in bulk - r8152: adjust generic_ocp_write function - r8152: fix the autosuspend doesn't work - r8152: Add __GFP_NOWARN to big allocations - r8152: reduce the control transfer of rtl8152_get_version() - r8152: remove rtl_vendor_mode function - r8152: avoid to change cfg for all devices - r8152: add USB device driver for config selection - r8152: use napi_gro_frags - cdc_ether: no need to blacklist any r8152 devices - cdc_ether: add u-blox 0x1313 composition Build system: x86_64 Build-tested: bcm2711, rockchip, x86/64 Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2023-11-28 18:27:18 +00:00
From 788d30daa8f97f06166b6a63f0e51f2a4c2f036a Mon Sep 17 00:00:00 2001
From: Hayes Wang <hayeswang@realtek.com>
Date: Tue, 26 Sep 2023 19:17:14 +0800
Subject: [PATCH] r8152: use napi_gro_frags
Use napi_gro_frags() for the skb of fragments when the work_done is less
than budget.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230926111714.9448-434-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/usb/r8152.c | 67 ++++++++++++++++++++++++++++++-----------
1 file changed, 50 insertions(+), 17 deletions(-)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2583,8 +2583,9 @@ static int rx_bottom(struct r8152 *tp, i
while (urb->actual_length > len_used) {
struct net_device *netdev = tp->netdev;
struct net_device_stats *stats = &netdev->stats;
- unsigned int pkt_len, rx_frag_head_sz;
+ unsigned int pkt_len, rx_frag_head_sz, len;
struct sk_buff *skb;
+ bool use_frags;
WARN_ON_ONCE(skb_queue_len(&tp->rx_queue) >= 1000);
@@ -2597,45 +2598,77 @@ static int rx_bottom(struct r8152 *tp, i
break;
pkt_len -= ETH_FCS_LEN;
+ len = pkt_len;
rx_data += sizeof(struct rx_desc);
- if (!agg_free || tp->rx_copybreak > pkt_len)
- rx_frag_head_sz = pkt_len;
+ if (!agg_free || tp->rx_copybreak > len)
+ use_frags = false;
else
- rx_frag_head_sz = tp->rx_copybreak;
+ use_frags = true;
+
+ if (use_frags) {
+ /* If the budget is exhausted, the packet
+ * would be queued in the driver. That is,
+ * napi_gro_frags() wouldn't be called, so
+ * we couldn't use napi_get_frags().
+ */
+ if (work_done >= budget) {
+ rx_frag_head_sz = tp->rx_copybreak;
+ skb = napi_alloc_skb(napi,
+ rx_frag_head_sz);
+ } else {
+ rx_frag_head_sz = 0;
+ skb = napi_get_frags(napi);
+ }
+ } else {
+ rx_frag_head_sz = 0;
+ skb = napi_alloc_skb(napi, len);
+ }
- skb = napi_alloc_skb(napi, rx_frag_head_sz);
if (!skb) {
stats->rx_dropped++;
goto find_next_rx;
}
skb->ip_summed = r8152_rx_csum(tp, rx_desc);
- memcpy(skb->data, rx_data, rx_frag_head_sz);
- skb_put(skb, rx_frag_head_sz);
- pkt_len -= rx_frag_head_sz;
- rx_data += rx_frag_head_sz;
- if (pkt_len) {
+ rtl_rx_vlan_tag(rx_desc, skb);
+
+ if (use_frags) {
+ if (rx_frag_head_sz) {
+ memcpy(skb->data, rx_data,
+ rx_frag_head_sz);
+ skb_put(skb, rx_frag_head_sz);
+ len -= rx_frag_head_sz;
+ rx_data += rx_frag_head_sz;
+ skb->protocol = eth_type_trans(skb,
+ netdev);
+ }
+
skb_add_rx_frag(skb, 0, agg->page,
agg_offset(agg, rx_data),
- pkt_len,
- SKB_DATA_ALIGN(pkt_len));
+ len, SKB_DATA_ALIGN(len));
get_page(agg->page);
+ } else {
+ memcpy(skb->data, rx_data, len);
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, netdev);
}
- skb->protocol = eth_type_trans(skb, netdev);
- rtl_rx_vlan_tag(rx_desc, skb);
if (work_done < budget) {
+ if (use_frags)
+ napi_gro_frags(napi);
+ else
+ napi_gro_receive(napi, skb);
+
work_done++;
stats->rx_packets++;
- stats->rx_bytes += skb->len;
- napi_gro_receive(napi, skb);
+ stats->rx_bytes += pkt_len;
} else {
__skb_queue_tail(&tp->rx_queue, skb);
}
find_next_rx:
- rx_data = rx_agg_align(rx_data + pkt_len + ETH_FCS_LEN);
+ rx_data = rx_agg_align(rx_data + len + ETH_FCS_LEN);
rx_desc = (struct rx_desc *)rx_data;
len_used = agg_offset(agg, rx_data);
len_used += sizeof(struct rx_desc);