openwrt/package/boot/uboot-d1/patches/0045-phy-sun4i-usb-Use-DM_GPIO-for-id-vbus_det-GPIOs.patch

From afa281decfbb174f57341897e0ad50ee9ad3564f Mon Sep 17 00:00:00 2001
From: Zoltan HERPAI <wigyori@uid0.hu>
Date: Tue, 6 Jun 2023 17:59:24 +0000
Subject: [PATCH 45/90] phy: sun4i-usb: Use DM_GPIO for id/vbus_det GPIOs

Now that the sunxi_gpio driver handles pull-up/down via the driver
model, we can switch to DM_GPIO for these pins with no loss in
functionality. Since the driver now gets its pin configuration from
the device tree, we can remove the Kconfig symbols.

Signed-off-by: Samuel Holland <samuel@sholland.org>

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
---
 arch/arm/dts/sun5i-a13-ampe-a76.dts           |  6 ++
 .../sun6i-a31s-yones-toptech-bs1078-v2.dts    |  1 +
 arch/arm/dts/sun8i-a33-sinlinx-sina33.dts     |  1 +
 arch/arm/mach-sunxi/Kconfig                   | 14 ----
 drivers/phy/allwinner/phy-sun4i-usb.c         | 71 ++++---------------
 5 files changed, 22 insertions(+), 71 deletions(-)

--- a/arch/arm/dts/sun5i-a13-ampe-a76.dts
+++ b/arch/arm/dts/sun5i-a13-ampe-a76.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 #include "sun5i-a13.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Ampe A76";
 	compatible = "ampe,a76", "allwinner,sun5i-a13";
@@ -26,3 +28,7 @@
 	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+};
--- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -176,6 +176,7 @@
 };
 
 &usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 	usb1_vbus-supply = <&reg_dldo1>;
 	usb2_vbus-supply = <&reg_dc1sw>;
 	status = "okay";
--- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
@@ -271,5 +271,6 @@
 
 &usbphy {
 	status = "okay";
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
 	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
 };
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -655,20 +655,6 @@ config MMC_SUNXI_SLOT_EXTRA
 	slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
 	support for this.
 
-config USB0_VBUS_DET
-	string "Vbus detect pin for usb0 (otg)"
-	default ""
-	---help---
-	Set the Vbus detect pin for usb0 (otg). This takes a string in the
-	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
-
-config USB0_ID_DET
-	string "ID detect pin for usb0 (otg)"
-	default ""
-	---help---
-	Set the ID detect pin for usb0 (otg). This takes a string in the
-	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
-
 config I2C0_ENABLE
 	bool "Enable I2C/TWI controller 0"
 	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_R40
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -96,32 +96,8 @@ struct sun4i_usb_phy_cfg {
 	int missing_phys;
 };
 
-struct sun4i_usb_phy_info {
-	const char *gpio_vbus_det;
-	const char *gpio_id_det;
-} phy_info[] = {
-	{
-		.gpio_vbus_det = CONFIG_USB0_VBUS_DET,
-		.gpio_id_det = CONFIG_USB0_ID_DET,
-	},
-	{
-		.gpio_vbus_det = NULL,
-		.gpio_id_det = NULL,
-	},
-	{
-		.gpio_vbus_det = NULL,
-		.gpio_id_det = NULL,
-	},
-	{
-		.gpio_vbus_det = NULL,
-		.gpio_id_det = NULL,
-	},
-};
-
 struct sun4i_usb_phy_plat {
 	void __iomem *pmu;
-	struct gpio_desc gpio_vbus_det;
-	struct gpio_desc gpio_id_det;
 	struct clk clocks;
 	struct reset_ctl resets;
 	struct udevice *vbus;
@@ -132,6 +108,8 @@ struct sun4i_usb_phy_data {
 	void __iomem *base;
 	const struct sun4i_usb_phy_cfg *cfg;
 	struct sun4i_usb_phy_plat *usb_phy;
+	struct gpio_desc id_det_gpio;
+	struct gpio_desc vbus_det_gpio;
 	struct udevice *vbus_power_supply;
 };
 
@@ -393,11 +371,10 @@ static int sun4i_usb_phy_xlate(struct ph
 int sun4i_usb_phy_vbus_detect(struct phy *phy)
 {
 	struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
-	struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
 	int err = 1, retries = 3;
 
-	if (dm_gpio_is_valid(&usb_phy->gpio_vbus_det)) {
-		err = dm_gpio_get_value(&usb_phy->gpio_vbus_det);
+	if (dm_gpio_is_valid(&data->vbus_det_gpio)) {
+		err = dm_gpio_get_value(&data->vbus_det_gpio);
 		/*
 		 * Vbus may have been provided by the board and just turned off
 		 * some milliseconds ago on reset. What we're measuring then is
@@ -405,7 +382,7 @@ int sun4i_usb_phy_vbus_detect(struct phy
 		 */
 		while (err > 0 && retries--) {
 			mdelay(100);
-			err = dm_gpio_get_value(&usb_phy->gpio_vbus_det);
+			err = dm_gpio_get_value(&data->vbus_det_gpio);
 		}
 	} else if (data->vbus_power_supply) {
 		err = regulator_get_enable(data->vbus_power_supply);
@@ -417,12 +394,11 @@ int sun4i_usb_phy_vbus_detect(struct phy
 int sun4i_usb_phy_id_detect(struct phy *phy)
 {
 	struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
-	struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
 
-	if (!dm_gpio_is_valid(&usb_phy->gpio_id_det))
-		return -1;
+	if (!dm_gpio_is_valid(&data->id_det_gpio))
+		return -EOPNOTSUPP;
 
-	return dm_gpio_get_value(&usb_phy->gpio_id_det);
+	return dm_gpio_get_value(&data->id_det_gpio);
 }
 
 void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled)
@@ -452,13 +428,18 @@ static int sun4i_usb_phy_probe(struct ud
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 
+	gpio_request_by_name(dev, "usb0_id_det-gpios", 0, &data->id_det_gpio,
+			     GPIOD_IS_IN | GPIOD_PULL_UP);
+
+	gpio_request_by_name(dev, "usb0_vbus_det-gpios", 0, &data->vbus_det_gpio,
+			     GPIOD_IS_IN);
+
 	device_get_supply_regulator(dev, "usb0_vbus_power-supply",
 				    &data->vbus_power_supply);
 
 	data->usb_phy = plat;
 	for (i = 0; i < data->cfg->num_phys; i++) {
 		struct sun4i_usb_phy_plat *phy = &plat[i];
-		struct sun4i_usb_phy_info *info = &phy_info[i];
 		char name[20];
 
 		if (data->cfg->missing_phys & BIT(i))
@@ -472,30 +453,6 @@ static int sun4i_usb_phy_probe(struct ud
 				return ret;
 		}
 
-		ret = dm_gpio_lookup_name(info->gpio_vbus_det,
-					  &phy->gpio_vbus_det);
-		if (ret == 0) {
-			ret = dm_gpio_request(&phy->gpio_vbus_det,
-					      "usb_vbus_det");
-			if (ret)
-				return ret;
-			ret = dm_gpio_set_dir_flags(&phy->gpio_vbus_det,
-						    GPIOD_IS_IN);
-			if (ret)
-				return ret;
-		}
-
-		ret = dm_gpio_lookup_name(info->gpio_id_det, &phy->gpio_id_det);
-		if (ret == 0) {
-			ret = dm_gpio_request(&phy->gpio_id_det, "usb_id_det");
-			if (ret)
-				return ret;
-			ret = dm_gpio_set_dir_flags(&phy->gpio_id_det,
-						GPIOD_IS_IN | GPIOD_PULL_UP);
-			if (ret)
-				return ret;
-		}
-
 		if (data->cfg->dedicated_clocks)
 			snprintf(name, sizeof(name), "usb%d_phy", i);
 		else