ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
da502be941
openwrt/target/linux/rockchip/image/armv8.mk

212 lines
5.4 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 11:57:25 +00:00
#
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# Copyright (C) 2020 Tobias Maedel
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
rockchip: use LZMA FIT for kernel image Use LZMA compressed kernel to save some space in boot partition. Fixes: #11197 Tested-by: Tianling Shen <cnsztl@immortalwrt.org> [NanoPi R2S] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-11-13 13:29:26 +00:00
# FIT will be loaded at 0x02080000. Leave 16M for that, align it to 2M and load the kernel after it.
KERNEL_LOADADDR := 0x03200000
rockchip: add Firefly ROC-RK3328-CC support Hardware -------- RockChip RK3328 ARM64 (4 cores) 4GB DDR4 RAM 1x 1000 Base-T 2 LEDs (POWER / USER) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot eMMC slot 1x USB 3.0 Port 2x USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-04-07 15:50:49 +00:00
define Device/firefly_roc-rk3328-cc
DEVICE_VENDOR := Firefly
DEVICE_MODEL := ROC-RK3328-CC
SOC := rk3328
DEVICE_DTS := rockchip/rk3328-roc-cc
UBOOT_DEVICE_NAME := roc-cc-rk3328
endef
TARGET_DEVICES += firefly_roc-rk3328-cc
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 07:22:42 +00:00
define Device/friendlyarm_nanopc-t4
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPC T4
SOC := rk3399
rockchip: enable wifi support for NanoPC T4 wifi module: AP6356S (BCM4356) SDIO Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 08:11:28 +00:00
DEVICE_PACKAGES := kmod-brcmfmac brcmfmac-nvram-4356-sdio cypress-firmware-4356-sdio
rockchip: add FriendlyARM NanoPC T4 support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR3 RAM 1x 1000 Base-T 1 GPIO LED (status) HDMI 2.0 3.5mm TRRS AV jack Micro-SD slot 16GB eMMC 1x USB 3.0 Port 2x USB 2.0 Port 1x USB Type-C Port 1x M.2 PCI-E Port AP6356S (BCM4356) SDIO WiFi & Bluetooth adapter -------- Note: AP6356S is not supported yet due to the lack of firmware and NVRAM Signed-off-by: Lu jicong <jiconglu58@gmail.com>
2023-07-24 07:22:42 +00:00
endef
TARGET_DEVICES += friendlyarm_nanopc-t4
rockchip: add NanoPi R2C support The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-13 05:54:38 +00:00
define Device/friendlyarm_nanopi-r2c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c
rockchip: add NanoPi R2C Plus support The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board eMMC flash (8G) included. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-16 06:34:40 +00:00
define Device/friendlyarm_nanopi-r2c-plus
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2C Plus
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += friendlyarm_nanopi-r2c-plus
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
define Device/friendlyarm_nanopi-r2s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R2S
SOC := rk3328
treewide: make dependency on kmod-usb-net selective A bunch of kernel modules depends on kmod-usb-net, but does not select it. Make AddDepends/usb-net selective, so we can drop some redundant +kmod-usb-net definitions for DEVICE_PACKAGES. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-05 10:03:13 +00:00
DEVICE_PACKAGES := kmod-usb-net-rtl8152
rockchip: add NanoPi R2S support Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-16 08:08:57 +00:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r2s
rockchip: add NanoPi R4S support Hardware -------- RockChip RK3399 ARM64 (6 cores) 4GB LPDDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. ===================================== NOTICE FOR USERS WHO USE 1GB VERSION: BY NOW IT IS NOT SUPPORTED ==================================== [initialed target] Co-developed-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Marty Jones <mj8263788@gmail.com> [fixed bootscript] Co-developed-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com> Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2020-12-25 12:03:14 +00:00
define Device/friendlyarm_nanopi-r4s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4S
DEVICE_VARIANT := 4GB LPDDR4
SOC := rk3399
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s
rockchip: add NanoPi R4S Enterprise Edition build FriendlyElec renamed the NanoPi R4S board with EEPROM (mac address) to "enterprise" edition, and it was added as a "new" board in upstream kernel. This patch switched to use that upstreamed dts and removed local EEPROM patch. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-17 05:54:36 +00:00
define Device/friendlyarm_nanopi-r4s-enterprise
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R4S Enterprise Edition
DEVICE_VARIANT := 4GB LPDDR4
SOC := rk3399
UBOOT_DEVICE_NAME := nanopi-r4s-rk3399
rockchip: fix device packages for nanopi r4s enterprise edition In official OpenWrt we use kmod-r8169 driver provided by upstream kernel instead of kmod-r8168 driver from Realtek. Fixes: afca1236f318 ("rockchip: add NanoPi R4S Enterprise Edition build") Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-25 04:36:02 +00:00
DEVICE_PACKAGES := kmod-r8169
rockchip: add NanoPi R4S Enterprise Edition build FriendlyElec renamed the NanoPi R4S board with EEPROM (mac address) to "enterprise" edition, and it was added as a "new" board in upstream kernel. This patch switched to use that upstreamed dts and removed local EEPROM patch. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-02-17 05:54:36 +00:00
endef
TARGET_DEVICES += friendlyarm_nanopi-r4s-enterprise
rockchip: add NanoPi R5C support Hardware -------- RockChip RK3568 ARM64 (4 cores) 1GB or 4GB LPDDR4X RAM 2x 2500 Base-T 4 LEDs (LAN / WAN / WIFI / POWER) 1 Button (Reset) 8GB or 32GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-25 16:37:31 +00:00
define Device/friendlyarm_nanopi-r5c
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5C
SOC := rk3568
DEVICE_PACKAGES := kmod-r8169 kmod-rtw88-8822ce rtl8822ce-firmware wpad-basic-mbedtls
endef
TARGET_DEVICES += friendlyarm_nanopi-r5c
rockchip: add NanoPi R5S support Hardware -------- RockChip RK3568 ARM64 (4 cores) 2GB or 4GB LPDDR4X RAM 1x 1000 Base-T 2x 2500 Base-T 4 LEDs (LAN1 / LAN2 / WAN / POWER) 8GB eMMC on-board Micro-SD Slot M.2 Slot 2x USB 3.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Tested-by: Packet Please <pktpls@systemli.org> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-06-25 16:37:30 +00:00
define Device/friendlyarm_nanopi-r5s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R5S
SOC := rk3568
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopi-r5s
rockchip: add NanoPi R6S support Add patches for the nanopi r6s board, backporting from 6.9 where basic support is landing. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15607 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-06-04 18:22:45 +00:00
define Device/friendlyarm_nanopi-r6s
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi R6S
SOC := rk3588s
DEVICE_PACKAGES := kmod-r8169
endef
TARGET_DEVICES += friendlyarm_nanopi-r6s
rockchip: add support for PINE64 ROCK64 This add support for PINE64 ROCK64, rockchip rk3328 board. Specifications: 4 x ARM Cortex A53 cores @ 1.5 GHz ARM Mali 450 MP2 GPU LPDDR3 RAM (up to 4GB) Gigabit Ethernet Micro SD Slot eMMC module slot SPI Flash 128Mbit 4K digital video out 2x USB 2.0 Host 1x USB 3.0 Host PI-2 bus PI-P5+ bus IR R/X port Real Time Clock (RTC) port Power Over Ethernet (POE) (when using optional HAT module) A/V jack Power, Reset and Recovery buttons 3.5mm barrel power (5V 3A) port To install write image to the sd using dd (dd if=*.img of=/*) Signed-off-by: Antonio Flores <antflores627@gmail.com>
2023-07-08 17:31:49 +00:00
define Device/pine64_rock64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Rock64
SOC := rk3328
endef
TARGET_DEVICES += pine64_rock64
rockchip: add support for Pine64 RockPro64 This adds the new rockchip target and support for RockPro64 RK3399 Flash: 16 MiB SPI NOR RAM: 2 GiB/4 GiB LPDDR4 SoC: RK3399 USB: 2x USB 2.0, 1x USB 3.0, 1x USB-C Ethernet: 1x GbE PCIe: PCIe 2.0, 4 lanes Storage: eMMC or SD card Optional SDIO wifi/bt module The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector, 6 ARM64 cores (4 little, 2 big), plenty of RAM and storage. By default the single Gigabit-Ethernet port is configured as the LAN port. Installation of the firware is possible by dd'ing the image to an SD card or the eMMC flash. Serial: 3v3 1500000 8n1 U-boot is build from the mainline tree and integrated into the images. Required ATF to build u-boot is downloaded from a CI build bot. Signed-off-by: Tobias Mädel <t.maedel@alfeld.de> Tested-by: Tobias Schramm <t.schramm@manjaro.org>
2020-04-12 11:57:25 +00:00
define Device/pine64_rockpro64
DEVICE_VENDOR := Pine64
DEVICE_MODEL := RockPro64
SOC := rk3399
endef
TARGET_DEVICES += pine64_rockpro64
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
rockchip: add Radxa CM3 IO board support Hardware -------- RockChip RK3566 ARM64 (4 cores) - up to 8GB LPDDR4X - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - 10/100/1000 Base-T - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-20 14:34:43 +00:00
define Device/radxa_cm3-io
DEVICE_VENDOR := Radxa
DEVICE_MODEL := CM3 IO
SOC := rk3566
DEVICE_DTS := rockchip/rk3566-radxa-cm3-io
UBOOT_DEVICE_NAME := radxa-cm3-io-rk3566
endef
TARGET_DEVICES += radxa_cm3-io
rockchip: add Radxa E25 board support Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-28 09:39:44 +00:00
define Device/radxa_e25
DEVICE_VENDOR := Radxa
DEVICE_MODEL := E25
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-radxa-e25
rockchip: fix baudrate for Radxa E25 According to the documentation[1], the serial baudrate of E25 is 115.2 Kbps, and setting it to 1.5 Mbps will cause onboard CH340B USB-UART chip unstable. Since mainline TPL is yet available, download patched TPL binary from Radxa. 1. https://wiki.radxa.com/Rock3/CM/CM3I/E25/getting_started Fixes: https://github.com/openwrt/openwrt/issues/15814 Fixes: f7c732bf9ed9 ("rockchip: add Radxa E25 board support") Tested-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/15870 Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-07-04 13:09:03 +00:00
BOOT_SCRIPT := radxa-e25
rockchip: add Radxa E25 board support Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-28 09:39:44 +00:00
UBOOT_DEVICE_NAME := radxa-e25-rk3568
rockchip: make SATA(AHCI) really work on Radxa E25 kmod-ahci-dwc is required to use SATA(AHCI) on Radxa E25. Fixes: f7c732bf9e ("rockchip: add Radxa E25 board support") Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15923 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-10 21:20:21 +00:00
DEVICE_PACKAGES := kmod-r8169 kmod-ata-ahci-dwc
rockchip: add Radxa E25 board support Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
2024-02-28 09:39:44 +00:00
endef
TARGET_DEVICES += radxa_e25
rockchip: add support for Radxa ROCK 3A Radxa ROCK 3A is a credit card sized SBC with rich interfaces[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3568 SoC - Quad Cortex-A55 CPU - Mail G52 GPU - 1 TOPs NPU - 2/4/8GB LPDDR4 RAM - 1x eMMC connector - 1x M.2 M Key (2-lane PCIe 3.0) supporting NVMe SSD - 1x Micro SD card slot - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x USB 3.0 Type-A port (Host) - 1x USB 3.0 Type-A port (OTG) - 2x USB 2.0 Type-A ports (Host) - 40 pin color GPIO header [1] https://radxa.com/products/rock3/3a Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15985 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-24 05:48:09 +00:00
define Device/radxa_rock-3a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 3A
SOC := rk3568
rockchip: rock 3a: fix image check failed Fixes the image check failed on system upgrade "Image check failed: upgrade: Device radxa,rock3a not supported by this image upgrade: Supported devices: radxa,rock-3a" Signed-off-by: Tomas Lara <tl849670@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16064 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-03 19:16:15 +00:00
SUPPORTED_DEVICES := radxa,rock3a
rockchip: add support for Radxa ROCK 3A Radxa ROCK 3A is a credit card sized SBC with rich interfaces[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3568 SoC - Quad Cortex-A55 CPU - Mail G52 GPU - 1 TOPs NPU - 2/4/8GB LPDDR4 RAM - 1x eMMC connector - 1x M.2 M Key (2-lane PCIe 3.0) supporting NVMe SSD - 1x Micro SD card slot - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x USB 3.0 Type-A port (Host) - 1x USB 3.0 Type-A port (OTG) - 2x USB 2.0 Type-A ports (Host) - 40 pin color GPIO header [1] https://radxa.com/products/rock3/3a Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15985 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-24 05:48:09 +00:00
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
endef
TARGET_DEVICES += radxa_rock-3a
rockchip: add Radxa ROCK 5A support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16/32GB LPDDR4X RAM 1000 Base-T Status LED eMMC/SPI Connector Micro-SD Slot 2x USB 3.0 Port 2x USB 2.0 Port Headphone Jack M.2 E-Key USB PD/QC 5/9/12/15/20V Power Install -------- Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/16149 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-05 08:22:47 +00:00
define Device/radxa_rock-5a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5A
SOC := rk3588s
UBOOT_DEVICE_NAME := rock5a-rk3588s
DEVICE_PACKAGES := kmod-hwmon-pwmfan
endef
TARGET_DEVICES += radxa_rock-5a
rockchip: add Radxa ROCK 5B support Hardware -------- RockChip RK3588 ARM64 (8 cores) 4/8/16/32GB LPDDR4X RAM 2500 Base-T RGB LED eMMC Connector SPI-NOR 16MB Micro-SD Slot 2x USB 2.0 Port 2x USB 3.0 Port Headphone Jack M.2 E-Key M.2 M-Key USB PD 5/9/12/15/20V Power Install -------- Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/16149 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-05 08:51:25 +00:00
define Device/radxa_rock-5b
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK 5B
SOC := rk3588
UBOOT_DEVICE_NAME := rock5b-rk3588
DEVICE_PACKAGES := kmod-r8169 kmod-hwmon-pwmfan
endef
TARGET_DEVICES += radxa_rock-5b
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
define Device/radxa_rock-pi-4a
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
DEVICE_VENDOR := Radxa
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
DEVICE_MODEL := ROCK Pi 4A
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
SOC := rk3399
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
SUPPORTED_DEVICES := radxa,rockpi4a radxa,rockpi4
rockchip: add support for Radxa Rock Pi 4 This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2020-09-25 18:00:40 +00:00
UBOOT_DEVICE_NAME := rock-pi-4-rk3399
endef
rockchip: rename "Rock Pi 4" to "Rock Pi 4A" Kernel has added the different variants of the Rock Pi 4 in commit b5edb0467370 ("arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts"). The former Rock Pi 4 is now Rock Pi 4A. For compatibility with kernel 5.4, this rename has been held back so far. Having switched to kernel 5.10 now, we can finally apply it in our tree as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 15:36:48 +00:00
TARGET_DEVICES += radxa_rock-pi-4a
rockchip: add Orange Pi R1 Plus support Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Note: booting from SPI is currently unsupported, you have to install the image on a SD card. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
rockchip: add support for Radxa ROCK Pi E This adds support for Radxa ROCK Pi E, rockchip rk3328 board. Specification: - CPU: Rockchip RK3328 64-bit Quad-core - RAM: DDR3 256MB ~ 2GB - Network: 1 x 10/100/1000M Ethernet 1 x 10/100M Ethernet - Storage: 1 x MicroSD Slot 1 x eMMC Module Slot - USB Host/OTG: 1 x USB3.0 Type A HOST 1 x USB2.0 HOST (40-pin pin-header) - Wireless RTL8723DU/RTL8821CU - Debug Serial: 1500000 baud at UART2 ( 40-pin pin-header) - Power Supply: Type-C 5V Optionally PoE Installation: - Write image to SD Card or EMMC with dd - Boot ROCK Pi E from the SD Card Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2023-08-29 18:23:30 +00:00
define Device/radxa_rock-pi-e
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi E
SOC := rk3328
endef
TARGET_DEVICES += radxa_rock-pi-e
rockchip: add support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-28 23:38:25 +00:00
define Device/radxa_rock-pi-e-v3
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi E v3.0
SOC := rk3328
DEVICE_DTS := rockchip/rk3328-rock-pi-e
rockchip: add RTL8723DU support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 has a RTL8723DU Wi-Fi 4 on-board device. enable it. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15910 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-25 22:03:21 +00:00
DEVICE_PACKAGES := kmod-rtw88-8723du kmod-usb-net-cdc-ncm kmod-usb-net-rndis wpad-basic-mbedtls
rockchip: add support for Radxa ROCK Pi E v3.0 Radxa ROCK Pi E v3.0 is a compact networking SBC[1] using the Rockchip RK3328 SoC. Hardware -------- - Rockchip RK3328 SoC - Quad A53 CPU - 512MB/1GB/2GB DDR4 RAM - 4/8/16/32GB eMMC - Micro SD Card slot - WiFi 4 and BT 4, or WiFi 5 and BT 5 (not supported yet) - 1x 1000M Ethernet with PoE support (additional PoE HAT required) - 1x 100M Ethernet - 1x USB 3.0 Type-A port (Host) - 1x 4-ring 3.5mm headphone jack - 40 Pin GPIO header [1] https://radxa.com/products/rockpi/pie Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15984 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-28 23:38:25 +00:00
endef
TARGET_DEVICES += radxa_rock-pi-e-v3
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-21 23:01:56 +00:00
define Device/radxa_rock-pi-s
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi S
SOC := rk3308
rockchip: fix sysupgrade for Radxa ROCK Pi S SUPPORTED_DEVICES is required for Radxa ROCK Pi S. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16167 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-14 01:20:12 +00:00
SUPPORTED_DEVICES := radxa,rockpis
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-21 23:01:56 +00:00
BOOT_SCRIPT := rock-pi-s
rockchip: add RTL8723DS support for Radxa ROCK Pi S Radxa ROCK Pi S has a RTL8723DS Wi-Fi 4 on-board device. enable it. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15910 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-25 22:03:18 +00:00
DEVICE_PACKAGES := kmod-rtw88-8723ds kmod-usb-net-cdc-ncm kmod-usb-net-rndis wpad-basic-mbedtls
rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-07-21 23:01:56 +00:00
endef
TARGET_DEVICES += radxa_rock-pi-s
rockchip: add Bananapi-R2 Pro board support Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com>
2024-04-11 16:35:00 +00:00
define Device/sinovoip_bpi-r2-pro
DEVICE_VENDOR := Sinovoip
DEVICE_MODEL := Bananapi-R2 Pro
SOC := rk3568
SUPPORTED_DEVICES := sinovoip,rk3568-bpi-r2pro
DEVICE_PACKAGES := kmod-ata-ahci-dwc
endef
TARGET_DEVICES += sinovoip_bpi-r2-pro
rockchip: add Orange Pi R1 Plus support Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. This device is similar to the NanoPi R2S, and has a 16MB SPI NOR (mx25l12805d). The reset button is changed to directly reset the power supply, another detail is that both network ports have independent MAC addresses. Note: booting from SPI is currently unsupported, you have to install the image on a SD card. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
define Device/xunlong_orangepi-r1-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus
rockchip: add Orange Pi R1 Plus LTS support The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise identical to OrangePi R1 Plus. Tested-by: Volkan Yetik <no3iverson@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-30 04:59:07 +00:00
define Device/xunlong_orangepi-r1-plus-lts
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi R1 Plus LTS
SOC := rk3328
DEVICE_PACKAGES := kmod-usb-net-rtl8152
endef
TARGET_DEVICES += xunlong_orangepi-r1-plus-lts
Reference in New Issue Copy Permalink