ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
d97143fadc
openwrt/target/linux/ath79/image/common-mikrotik.mk

26 lines
770 B
Makefile
Raw Normal View History

ath79: add support for MikroTik RouterBOARD wAP G-5HacT2HnD This commit adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC), a small weatherproof dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional anntennae and one 10/100/1000 Mbps Ethernet port. See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info. Specifications: - SoC: Qualcomm Atheros QCA9556 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: · Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae · Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae - Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port, passive PoE in Working: - Board/system detection - Sysupgrade - Serial console - Ethernet - 2.4 GHz radio - 5 GHz radio and LED - Reset button Not working/Unsupported: - 2.4 GHz LED - AP/CAP LED - ZT2046Q SPI temperature and voltage sensor This adds the basic features for supporting MikroTik devices: - a common recipe for mikrotik images in common-mikrotik.mk - support for minor (MikroTik NOR) split firmware (only for generic subtarget so far) Acknowledgments: Robert Marko <robimarko@gmail.com> Andrew Cameron <apcameron@softhome.net> Koen Vandeputte <koen.vandeputte@ncentric.com> Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-11-28 11:53:01 +00:00
define Device/mikrotik
DEVICE_VENDOR := MikroTik
ath79: mikrotik: use OpenWrt loader for initram image Return to using the OpenWrt kernel loader to decompress and load kernel initram image. Continue to use the vmlinuz kernel for squashfs. Mikrotik's bootloader RouterBOOT on some ath79 devices is failing to boot the current initram, due to the size of the initram image. On the ath79 wAP-ac: a 5.7MiB initram image would fail to boot After this change: a 6.6MiB initram image successfully loads This partially reverts commit e91344776b9ba7c864be88d915c9c0df0eb790dd. An alternative of using RouterBOOT's capability of loading an initrd ELF section was investigated, but the OpenWrt kernel loader allows larger image. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
2022-05-18 23:18:20 +00:00
LOADER_TYPE := elf
ath79: mikrotik: use vmlinuz (zBoot ELF) - minimal built initramfs: 10MB vmlinux ELF -> 6MB vmlinuz - ~5 seconds for kernel decompression, which was equivalent to the additional time to load the uncompressed ELF from SPI NOR. - Removes requirement for lzma-loader, which may have been causing some image builds to fail to boot on Mikrotik mt7621. Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
2020-10-15 09:27:55 +00:00
KERNEL_NAME := vmlinuz
KERNEL := kernel-bin | append-dtb-elf
ath79: mikrotik: use OpenWrt loader for initram image Return to using the OpenWrt kernel loader to decompress and load kernel initram image. Continue to use the vmlinuz kernel for squashfs. Mikrotik's bootloader RouterBOOT on some ath79 devices is failing to boot the current initram, due to the size of the initram image. On the ath79 wAP-ac: a 5.7MiB initram image would fail to boot After this change: a 6.6MiB initram image successfully loads This partially reverts commit e91344776b9ba7c864be88d915c9c0df0eb790dd. An alternative of using RouterBOOT's capability of loading an initrd ELF section was investigated, but the OpenWrt kernel loader allows larger image. Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
2022-05-18 23:18:20 +00:00
KERNEL_INITRAMFS_NAME := vmlinux-initramfs
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel
ath79: add support for MikroTik RouterBOARD wAP G-5HacT2HnD This commit adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC), a small weatherproof dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional anntennae and one 10/100/1000 Mbps Ethernet port. See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info. Specifications: - SoC: Qualcomm Atheros QCA9556 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: · Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae · Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae - Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port, passive PoE in Working: - Board/system detection - Sysupgrade - Serial console - Ethernet - 2.4 GHz radio - 5 GHz radio and LED - Reset button Not working/Unsupported: - 2.4 GHz LED - AP/CAP LED - ZT2046Q SPI temperature and voltage sensor This adds the basic features for supporting MikroTik devices: - a common recipe for mikrotik images in common-mikrotik.mk - support for minor (MikroTik NOR) split firmware (only for generic subtarget so far) Acknowledgments: Robert Marko <robimarko@gmail.com> Andrew Cameron <apcameron@softhome.net> Koen Vandeputte <koen.vandeputte@ncentric.com> Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-11-28 11:53:01 +00:00
endef
ath79/mikrotik: create shared device definitions for nor and nand Move the image preparation and nand-utils package selection into common device definitions for NOR/NAND devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-01 15:39:33 +00:00
define Device/mikrotik_nor
$(Device/mikrotik)
ath79: mikrotik: update kernel on NAND using Yafut Instead of erasing the entire NAND partition holding the kernel during every system upgrade and then flashing a Yaffs file system image prepared using kernel2minor (not accounting for bad blocks in the process), use the Yafut utility to replace the kernel executable on MikroTik NAND devices, preserving the existing Yaffs file system (including bad block information) on the partition holding the kernel. Add Yafut to DEFAULT_PACKAGES for the ath79/mikrotik target, so that the tool is included in the initramfs images created when building for multiple profiles. However, exclude Yafut from the images built for MikroTik devices with NOR flash as the tool is currently only meant to be used on devices with NAND flash. As this addresses the concerns for MikroTik NAND devices discussed in commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images"), re-enable building images for these devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
2023-04-01 18:54:14 +00:00
DEVICE_PACKAGES := -yafut
ath79/mikrotik: create shared device definitions for nor and nand Move the image preparation and nand-utils package selection into common device definitions for NOR/NAND devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-01 15:39:33 +00:00
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | \
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
treewide: call check-size before append-metadata sysupgrade metadata is not flashed to the device, so check-size should be called _before_ adding metadata to the image. While at it, do some obvious wrapping improvements. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
2021-06-20 16:54:36 +00:00
check-size | append-metadata
ath79/mikrotik: create shared device definitions for nor and nand Move the image preparation and nand-utils package selection into common device definitions for NOR/NAND devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-01 15:39:33 +00:00
endef
define Device/mikrotik_nand
$(Device/mikrotik)
ath79: mikrotik: update kernel on NAND using Yafut Instead of erasing the entire NAND partition holding the kernel during every system upgrade and then flashing a Yaffs file system image prepared using kernel2minor (not accounting for bad blocks in the process), use the Yafut utility to replace the kernel executable on MikroTik NAND devices, preserving the existing Yaffs file system (including bad block information) on the partition holding the kernel. Add Yafut to DEFAULT_PACKAGES for the ath79/mikrotik target, so that the tool is included in the initramfs images created when building for multiple profiles. However, exclude Yafut from the images built for MikroTik devices with NOR flash as the tool is currently only meant to be used on devices with NAND flash. As this addresses the concerns for MikroTik NAND devices discussed in commit 9d96b6fb72 ("ath79/mikrotik: disable building NAND images"), re-enable building images for these devices. Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
2023-04-01 18:54:14 +00:00
IMAGE/sysupgrade.bin = append-kernel | sysupgrade-tar | append-metadata
ath79: mikrotik: bump compat version for yafut images Following 5264296, Mirotik NAND devices now use yafut to flash the kernel on devices. This method is incompatible with the old-style "kernel2minor" flash mechanism. Even though NAND images were disabled in default build since 21.02, a user flashing a new-style image onto an old-style image would result in in a soft-brick[1]. In order to prevent such accidental mishap, especially as these device images will be reenabled in the upcoming release, bump the compat version. After the new image is flashed, the compat version can be updated: uci set system.@system[0].compat_version='1.1' uci commit [1] https://github.com/openwrt/openwrt/pull/12225#issuecomment-1517529262 Cc: Michał Kępień <openwrt@kempniu.pl> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-05-05 12:54:03 +00:00
DEVICE_COMPAT_MESSAGE := \
NAND images switched to yafut. If running older image, reinstall from initramfs.
DEVICE_COMPAT_VERSION := 1.1
ath79/mikrotik: create shared device definitions for nor and nand Move the image preparation and nand-utils package selection into common device definitions for NOR/NAND devices. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-01 15:39:33 +00:00
endef
Reference in New Issue Copy Permalink