openwrt/target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch

From 7cc39a6bedbd85f3ff7e16845f310e4ce8d9833f Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Tue, 6 Sep 2022 00:31:19 +0100
Subject: [PATCH] net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX module
To: netdev@vger.kernel.org,
    linux-kernel@vger.kernel.org,
    Russell King <linux@armlinux.org.uk>,
    Andrew Lunn <andrew@lunn.ch>,
    Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>,
    Eric Dumazet <edumazet@google.com>,
    Jakub Kicinski <kuba@kernel.org>,
    Paolo Abeni <pabeni@redhat.com>,
    Josef Schlehofer <pepe.schlehofer@gmail.com>

This copper module comes with broken TX_FAULT indicator which must be
ignored for it to work. Implement ignoring TX_FAULT state bit also
during reset/insertion and mute the warning telling the user that the
module indicates TX_FAULT.

Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/phy/sfp.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -390,6 +390,11 @@ static const struct sfp_quirk sfp_quirks
 		.modes = sfp_quirk_2500basex,
 		.fixup = sfp_fixup_ignore_tx_fault,
 	}, {
+		// OEM SFP-GE-T is 1000Base-T module
+		.vendor = "OEM",
+		.part = "SFP-GE-T",
+		.fixup = sfp_fixup_ignore_tx_fault,
+	}, {
 		// Lantech 8330-262D-E can operate at 2500base-X, but
 		// incorrectly report 2500MBd NRZ in their EEPROM
 		.vendor = "Lantech",
@@ -2319,7 +2324,8 @@ static void sfp_sm_main(struct sfp *sfp,
 			 * or t_start_up, so assume there is a fault.
 			 */
 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
-				     sfp->sm_fault_retries == N_FAULT_INIT);
+				     !sfp->tx_fault_ignore &&
+				     (sfp->sm_fault_retries == N_FAULT_INIT));
 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
 	init_done:
 			sfp->sm_phy_retries = R_PHY_RETRY;
@@ -2542,10 +2548,12 @@ static void sfp_check_state(struct sfp *
 	mutex_lock(&sfp->st_mutex);
 	state = sfp_get_state(sfp);
 	changed = state ^ sfp->state;
-	if (sfp->tx_fault_ignore)
+	if (sfp->tx_fault_ignore) {
 		changed &= SFP_F_PRESENT | SFP_F_LOS;
-	else
+		state &= ~SFP_F_TX_FAULT;
+	} else {
 		changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
+	}
 
 	for (i = 0; i < GPIO_MAX; i++)
 		if (changed & BIT(i))