openwrt/target/linux/bcm27xx/patches-6.6/950-0716-drivers-mmc-sdhci-add-SPURIOUS_INT_RESP-quirk.patch

From 26639bef107cf73b7d4e12666caefc93f15601cc Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.com>
Date: Wed, 8 Nov 2023 11:52:16 +0000
Subject: [PATCH 0716/1085] drivers: mmc: sdhci: add SPURIOUS_INT_RESP quirk

Certain controllers (dwc-mshc) generate timeout conditions separately to
command-completion conditions, where the end result is interrupts are
separated in time depending on the current SDCLK frequency.

This causes spurious interrupts if SDCLK is slow compared to the CPU's
ability to process and return from interrupt. This occurs during card
probe with an empty slot where all commands that would generate a
response time out.

Add a quirk to squelch command response interrupts when a command
timeout interrupt is received.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
 drivers/mmc/host/sdhci.c | 11 +++++++++++
 drivers/mmc/host/sdhci.h |  3 +++
 2 files changed, 14 insertions(+)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1713,6 +1713,12 @@ static bool sdhci_send_command(struct sd
 	if (host->use_external_dma)
 		sdhci_external_dma_pre_transfer(host, cmd);
 
+	if (host->quirks2 & SDHCI_QUIRK2_SPURIOUS_INT_RESP) {
+		host->ier |= SDHCI_INT_RESPONSE;
+		sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+		sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+	}
+
 	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
 
 	return true;
@@ -3306,6 +3312,11 @@ static void sdhci_cmd_irq(struct sdhci_h
 		if (intmask & SDHCI_INT_TIMEOUT) {
 			host->cmd->error = -ETIMEDOUT;
 			sdhci_err_stats_inc(host, CMD_TIMEOUT);
+			if (host->quirks2 & SDHCI_QUIRK2_SPURIOUS_INT_RESP) {
+				host->ier &= ~SDHCI_INT_RESPONSE;
+				sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+				sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+			}
 		} else {
 			host->cmd->error = -EILSEQ;
 			if (!mmc_op_tuning(host->cmd->opcode))
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -492,6 +492,9 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_NO_SDR50  (1<<20)
 #define SDHCI_QUIRK2_NO_SDR104	(1<<21)
 
+/* Command timeouts may generate a trailing INT_RESPONSE later */
+#define SDHCI_QUIRK2_SPURIOUS_INT_RESP			(1<<31)
+
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
 	phys_addr_t mapbase;	/* physical address base */