ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 08:51:13 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
d836a688d1
openwrt/package/boot/uboot-envtools/Makefile

88 lines
2.3 KiB
Makefile
Raw Normal View History

this patch fixes uboot-envtools so that it is no longer broken. -Raphael SVN-Revision: 19999
2010-03-05 20:27:58 +00:00
#
uboot-envtools: add support for wndr3700 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39380
2014-01-24 00:07:48 +00:00
# Copyright (C) 2006-2014 OpenWrt.org
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=uboot-envtools
package/u-boot-envtools: update to version 2011.06. This updates uboot-envtools to the version which comes with U-Boot 2011.06. The important novelity is that fw_setenv now supports batch processing, which greatly improves sysupgrade of the ALL0258N as otherwise we would have to overwrite uboot-env up to 8x in a single firmware upgrade. Unfortunately, no newer version of the sources is available from Debian, so we got to take it from the u-boot source which is kinda ugly... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28566
2011-10-24 21:49:24 +00:00
PKG_DISTNAME:=u-boot
uboot-envtools: update to 2024.01 Update to latest version. Refresh patches: - 002-Revert-tools-env-use-run-to-store-lockfile.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-01-29 18:38:20 +00:00
PKG_VERSION:=2024.01
kirkwood: add D-Link DNS-320L support Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6702 @1GHz - 256Mb RAM - 128Mb NAND - 1x GbE LAN (Marvell 88E1318R) - 1x USB 2.0 - 2x SATA - Weltrend WT69P3 ("supervisor" MCU chip) - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Notes: - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu. - The original MAC address is stored in the "mini firmware" image's first 17 bytes. - Compared to the original MTD layout, the uImage+rootfs are now stored in a common ubi partition. Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 u-boot-dns320l/u-boot.kwb (Please note that "PHY reset timed out" seems to be customary on kirkwood devices, the egiga0 interface works regardless.) - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-01-05 17:42:53 +00:00
PKG_RELEASE:=3
uboot-envtools: update to 2020.04 also revert to directly download the archive from https Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2020-04-18 22:39:08 +00:00
PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \
https://ftp.denx.de/pub/u-boot \
https://mirror.cyberbits.eu/u-boot \
ftp://ftp.denx.de/pub/u-boot
uboot-envtools: update to 2024.01 Update to latest version. Refresh patches: - 002-Revert-tools-env-use-run-to-store-lockfile.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-01-29 18:38:20 +00:00
PKG_HASH:=b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3
uboot-envtools: Change download to git. Currently, the build system uses an openwrt mirror which does not currently work and FTP can be unreliable under several circumstances. This change implicitly allows using all the mirrors to download. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 19:59:05 +00:00
PKG_SOURCE_SUBDIR:=$(PKG_DISTNAME)-$(PKG_VERSION)
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_DISTNAME)-$(PKG_VERSION)
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
uboot-envtool: remove superfluous + sign from PKG_BUILD_DEPENDS A + sign does not have meaning in build depends. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-07 18:52:05 +00:00
PKG_BUILD_DEPENDS:=fstools
uboot-envtools: add support for environment in ubi volume On UBI enabled devices, U-Boot might store it's environment on UBI volume(s). Support this in uboot-envtools, so fw_setenv and fw_printenv can work on these platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40929
2014-06-02 12:44:19 +00:00
uboot-*: update license info in uboot packages Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
PKG_LICENSE:=GPL-2.0 GPL-2.0+
PKG_LICENSE_FILES:=Licenses/README
uboot-envtools: make it not shared uboot-envtools have some stuff related to the cpu. This should fix following error on lantiq soc: Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk. Configuring uboot-envtools. //usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh' Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-21 23:04:48 +00:00
PKG_FLAGS:=nonshared
uboot-envtools: bump to 2014.10 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43433
2014-11-30 01:14:17 +00:00
PKG_BUILD_PARALLEL:=1
uboot-envtools: upgrade to version 2013.01.01 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
include $(INCLUDE_DIR)/package.mk
package/u-boot-envtools: update to version 2011.06. This updates uboot-envtools to the version which comes with U-Boot 2011.06. The important novelity is that fw_setenv now supports batch processing, which greatly improves sysupgrade of the ALL0258N as otherwise we would have to overwrite uboot-env up to 8x in a single firmware upgrade. Unfortunately, no newer version of the sources is available from Debian, so we got to take it from the u-boot source which is kinda ugly... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28566
2011-10-24 21:49:24 +00:00
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
define Package/uboot-envtools
SECTION:=utils
CATEGORY:=Utilities
uboot-envtools: move to Boot Loaders submenu Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-02 19:33:01 +00:00
SUBMENU:=Boot Loaders
uboot-envtools: mark as 2.6 only, use a shorter title and a longer description SVN-Revision: 20118
2010-03-10 04:17:22 +00:00
TITLE:=read/modify U-Boot bootloader environment
cleanup Makefiles (#7212) SVN-Revision: 21107
2010-04-23 11:27:29 +00:00
URL:=http://www.denx.de/wiki/U-Boot
uboot-envtools: update to 2012.04.01 SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
endef
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
define Package/uboot-envtools/description
uboot-envtools: mark as 2.6 only, use a shorter title and a longer description SVN-Revision: 20118
2010-03-10 04:17:22 +00:00
This package includes tools to read and modify U-Boot bootloader environment.
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
endef
uboot-envtools: upgrade to version 2013.01.01 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
define Build/Configure
uboot-envtools: fix parallel building Recent envtools update to 2023.07.02 has introduced a breakage when trying to parallel build with the following error: /bin/sh: line 1: scripts/basic/fixdep: No such file or directory Luckily it can easily be reproduced locally via a simple script so it was not hard to bisect it down to upstream commit [1]. However, its not that commits fault, it just uncovered an issue with the way we have been building envtools for a long time, maybe even from the package introduction. The issue is that we are trying to build envtools as one of the U-Boot no-dot-config-targets but envtools was newer a valid target for it but since we were creating the config headers that were not actually used it was actually building all this time. Since the blamed commit [1] a tool called printinitialenv is built and now a proper config is actually required in order for prerequisites to get built properly. So, in order to properly fix this (Hopefully for good) lets stop pretending that envtools are a valid no-dot-config-targets target and use the tools-only defconfig which is meant exactly for just building the tools. This will make a minimal config for the U-Boot sandbox target and then envtools will build just fine in parallel mode (I tested with 32 threads). We do hovewer need to override the ARCH passed by OpenWrt and set it to sandbox as otherwise U-Boot will not find the required headers because the ARCH is being overriden to an incorrect one. [1] https://source.denx.de/u-boot/u-boot/-/commit/40b77f2a3ac13a7547c1b7c9c51a4090869de8f4 Fixes: 9db033005210 ("uboot-envtools: update to 2023.07.02") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2023-08-21 12:58:05 +00:00
$(call Build/Compile/Default,tools-only_defconfig)
uboot-envtools: upgrade to version 2013.01.01 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
endef
uboot-envtools: fix parallel building Recent envtools update to 2023.07.02 has introduced a breakage when trying to parallel build with the following error: /bin/sh: line 1: scripts/basic/fixdep: No such file or directory Luckily it can easily be reproduced locally via a simple script so it was not hard to bisect it down to upstream commit [1]. However, its not that commits fault, it just uncovered an issue with the way we have been building envtools for a long time, maybe even from the package introduction. The issue is that we are trying to build envtools as one of the U-Boot no-dot-config-targets but envtools was newer a valid target for it but since we were creating the config headers that were not actually used it was actually building all this time. Since the blamed commit [1] a tool called printinitialenv is built and now a proper config is actually required in order for prerequisites to get built properly. So, in order to properly fix this (Hopefully for good) lets stop pretending that envtools are a valid no-dot-config-targets target and use the tools-only defconfig which is meant exactly for just building the tools. This will make a minimal config for the U-Boot sandbox target and then envtools will build just fine in parallel mode (I tested with 32 threads). We do hovewer need to override the ARCH passed by OpenWrt and set it to sandbox as otherwise U-Boot will not find the required headers because the ARCH is being overriden to an incorrect one. [1] https://source.denx.de/u-boot/u-boot/-/commit/40b77f2a3ac13a7547c1b7c9c51a4090869de8f4 Fixes: 9db033005210 ("uboot-envtools: update to 2023.07.02") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2023-08-21 12:58:05 +00:00
define Build/Compile
$(call Build/Compile/Default,envtools)
endef
# We need to override the ARCH passed by buildsystem as otherwise the defconfig
# for tools-only wont match and the includes for sandbox will be dropped
uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELRO Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool. In addition also use the more standard make invocation script. With this change the fw_printenv tool is built with PIE and Full RELRO support when activated globally in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-11-07 20:01:40 +00:00
MAKE_FLAGS += \
uboot-envtools: fix parallel building Recent envtools update to 2023.07.02 has introduced a breakage when trying to parallel build with the following error: /bin/sh: line 1: scripts/basic/fixdep: No such file or directory Luckily it can easily be reproduced locally via a simple script so it was not hard to bisect it down to upstream commit [1]. However, its not that commits fault, it just uncovered an issue with the way we have been building envtools for a long time, maybe even from the package introduction. The issue is that we are trying to build envtools as one of the U-Boot no-dot-config-targets but envtools was newer a valid target for it but since we were creating the config headers that were not actually used it was actually building all this time. Since the blamed commit [1] a tool called printinitialenv is built and now a proper config is actually required in order for prerequisites to get built properly. So, in order to properly fix this (Hopefully for good) lets stop pretending that envtools are a valid no-dot-config-targets target and use the tools-only defconfig which is meant exactly for just building the tools. This will make a minimal config for the U-Boot sandbox target and then envtools will build just fine in parallel mode (I tested with 32 threads). We do hovewer need to override the ARCH passed by OpenWrt and set it to sandbox as otherwise U-Boot will not find the required headers because the ARCH is being overriden to an incorrect one. [1] https://source.denx.de/u-boot/u-boot/-/commit/40b77f2a3ac13a7547c1b7c9c51a4090869de8f4 Fixes: 9db033005210 ("uboot-envtools: update to 2023.07.02") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2023-08-21 12:58:05 +00:00
ARCH="sandbox" \
uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELRO Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool. In addition also use the more standard make invocation script. With this change the fw_printenv tool is built with PIE and Full RELRO support when activated globally in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2019-11-07 20:01:40 +00:00
TARGET_CFLAGS="$(TARGET_CFLAGS)" \
uboot-envtools: fix parallel building Recent envtools update to 2023.07.02 has introduced a breakage when trying to parallel build with the following error: /bin/sh: line 1: scripts/basic/fixdep: No such file or directory Luckily it can easily be reproduced locally via a simple script so it was not hard to bisect it down to upstream commit [1]. However, its not that commits fault, it just uncovered an issue with the way we have been building envtools for a long time, maybe even from the package introduction. The issue is that we are trying to build envtools as one of the U-Boot no-dot-config-targets but envtools was newer a valid target for it but since we were creating the config headers that were not actually used it was actually building all this time. Since the blamed commit [1] a tool called printinitialenv is built and now a proper config is actually required in order for prerequisites to get built properly. So, in order to properly fix this (Hopefully for good) lets stop pretending that envtools are a valid no-dot-config-targets target and use the tools-only defconfig which is meant exactly for just building the tools. This will make a minimal config for the U-Boot sandbox target and then envtools will build just fine in parallel mode (I tested with 32 threads). We do hovewer need to override the ARCH passed by OpenWrt and set it to sandbox as otherwise U-Boot will not find the required headers because the ARCH is being overriden to an incorrect one. [1] https://source.denx.de/u-boot/u-boot/-/commit/40b77f2a3ac13a7547c1b7c9c51a4090869de8f4 Fixes: 9db033005210 ("uboot-envtools: update to 2023.07.02") Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2023-08-21 12:58:05 +00:00
TARGET_LDFLAGS="$(TARGET_LDFLAGS)"
uboot-envtools: update to 2012.04.01 SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
define Package/uboot-envtools/conffiles
/etc/config/ubootenv
/etc/fw_env.config
uboot-envtools: add support for multiple config partitions Most (all?) of the realtek devices have two u-boot config partitions with a different set of variables in each. The U-Boot shell provides two sets of apps to manipulate these: printenv- print environment variables printsys- printsys - print system information variables saveenv - save environment variables to persistent storage savesys - savesys - save system information variables to persistent storage setenv - set environment variables setsys - setsys - set system information variables Add support for multiple ubootenv configuration types, allowing more than one configuration file. Section names are not suitable for naming the different configurations since each file can be the result of multiple sections in case of backup partitions. Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-04-06 09:43:03 +00:00
/etc/fw_sys.config
package/uboot-envtools: make fw_setenv symlink optional Make the creation of the fw_set-symlink optional, so it can be disabled in user-builds so only people who know what they are doing will mess with uboot-env. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28698
2011-11-01 09:23:29 +00:00
endef
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
define Package/uboot-envtools/install
$(INSTALL_DIR) $(1)/usr/sbin
uboot-envtools: upgrade to version 2013.01.01 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/env/fw_printenv $(1)/usr/sbin
packages: use $(LN) macro, make symlinks relative Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 45250
2015-04-03 00:07:43 +00:00
$(LN) fw_printenv $(1)/usr/sbin/fw_setenv
uboot-envtools: add wrapper scripts for alternate config Now that we can create an alternate configuration file, add two wrapper scripts for simple access to it using the alternate alternate application names `fw_printsys' and `fw_setsys'. Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-04-06 09:43:04 +00:00
$(INSTALL_BIN) ./files/fw_printsys $(1)/usr/sbin
$(INSTALL_BIN) ./files/fw_setsys $(1)/usr/sbin
uboot-envtools: update to 2012.04.01 SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
$(INSTALL_DIR) $(1)/lib
$(INSTALL_DATA) ./files/uboot-envtools.sh $(1)/lib
$(INSTALL_DIR) $(1)/etc/uci-defaults
uboot-envtools: support uci-default config also per subtargets The current version of 'uboot-envtools' package generates dedicated uci-default file only per target. This change makes it possible to use subtarget-specific files, with name pattern: 'target_subtarget' (example: 'ath79_nand'). The subtarget-specific files will take precedence over target-specific one. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2021-04-01 22:52:56 +00:00
$(if $(wildcard ./files/$(BOARD)_$(SUBTARGET)), \
$(INSTALL_DATA) ./files/$(BOARD)_$(SUBTARGET) \
$(1)/etc/uci-defaults/30_uboot-envtools, \
$(if $(wildcard ./files/$(BOARD)), \
$(INSTALL_DATA) ./files/$(BOARD) \
$(1)/etc/uci-defaults/30_uboot-envtools \
) \
uboot-envtools: remove makefile duplication for supported targets Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-19 14:26:39 +00:00
)
package/u-boot-envtools: update to version 2011.06. This updates uboot-envtools to the version which comes with U-Boot 2011.06. The important novelity is that fw_setenv now supports batch processing, which greatly improves sysupgrade of the ALL0258N as otherwise we would have to overwrite uboot-env up to 8x in a single firmware upgrade. Unfortunately, no newer version of the sources is available from Debian, so we got to take it from the u-boot source which is kinda ugly... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28566
2011-10-24 21:49:24 +00:00
endef
add uboot-envtools SVN-Revision: 17981
2009-10-07 15:14:28 +00:00
$(eval $(call BuildPackage,uboot-envtools))
Reference in New Issue Copy Permalink