ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
d7eba8059b
openwrt/target/linux/qoriq/config-5.10

395 lines
9.7 KiB
Plaintext
Raw Normal View History

qoriq: new target Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 21:35:53 +00:00
CONFIG_64BIT=y
CONFIG_ALTIVEC=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ASN1=y
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_AUDIT_ARCH=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_PM=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BOOKE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLK_QORIQ=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CLZ_TAB=y
CONFIG_COMMON_CLK=y
CONFIG_COMPAT=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_CORENET_GENERIC=y
# CONFIG_CPUFREQ_DT is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_ISOLATION=y
CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
# CONFIG_CRYPTO_DEV_NX is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_ENGINE=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_DATA_SHIFT=12
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_OPS=y
CONFIG_DMA_OPS_BYPASS=y
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_E500=y
# CONFIG_E5500_CPU is not set
CONFIG_E6500_CPU=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
# CONFIG_EDAC_CPC925 is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_MPC85XX=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_F2FS_FS=y
CONFIG_FIXED_PHY=y
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_FSL_BMAN_TEST is not set
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_CORENET_RCPM=y
CONFIG_FSL_DMA=y
CONFIG_FSL_DPAA=y
# CONFIG_FSL_DPAA_CHECKING is not set
CONFIG_FSL_DPAA_ETH=y
CONFIG_FSL_EMB_PERFMON=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_GUTS=y
CONFIG_FSL_IFC=y
CONFIG_FSL_LBC=y
CONFIG_FSL_MPIC_TIMER_WAKEUP=y
CONFIG_FSL_PAMU=y
CONFIG_FSL_PCI=y
# CONFIG_FSL_QMAN_TEST is not set
CONFIG_FSL_SOC=y
CONFIG_FSL_SOC_BOOKE=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FTL=y
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_CPU is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
# CONFIG_GEN_RTC is not set
# CONFIG_GIANFAR is not set
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_GRO_CELLS=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HWMON=y
CONFIG_HW_CONSOLE=y
CONFIG_HW_RANDOM=y
qoriq: enable I2C in target kernel config The I2C controller used in QorIQ PPC devices requires the mpc-i2c driver, which is enabled by the I2C_MPC kernel config symbol. Enable this and its dependencies in the target kernel config, as is done for the mpc85xx target. This fixes missing hwmon, rtc and tpm devices on the M300. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-03-15 23:25:08 +00:00
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_MPC=y
qoriq: new target Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 21:35:53 +00:00
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_ISA_DMA_API=y
CONFIG_JBD2=y
CONFIG_JUMP_LABEL=y
CONFIG_JUMP_LABEL_FEATURE_CHECKS=y
# CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set
CONFIG_KALLSYMS=y
CONFIG_KERNEL_GZIP=y
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
# CONFIG_LD_HEAD_STUB_CATCH is not set
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_MAGIC_SYSRQ=y
qoriq: enable support for Marvell Alaska PHYs The WatchGuard Firebox M200 and M300 use a Marvell 88e1543 PHY for the first 3 ethernet ports. This PHY is supported by the Marvell Alaska PHY driver, so enable it. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-04-03 18:31:19 +00:00
CONFIG_MARVELL_PHY=y
qoriq: new target Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-06 21:35:53 +00:00
CONFIG_MATH_EMULATION=y
# CONFIG_MATH_EMULATION_FULL is not set
CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MEMFD_CREATE=y
CONFIG_MEMORY=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_WBSD is not set
CONFIG_MMIOWB=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_MPIC_TIMER=y
CONFIG_MPILIB=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=24
CONFIG_NR_IRQS=512
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IOMMU=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OPTPROBES=y
CONFIG_PACKING=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
CONFIG_PHYSICAL_START=0x00000000
CONFIG_PHYS_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_PM=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PM_CLK=y
CONFIG_PPC=y
CONFIG_PPC64=y
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_PPC_BOOK3E=y
CONFIG_PPC_BOOK3E_64=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_BOOK3S_64 is not set
CONFIG_PPC_DAWR=y
CONFIG_PPC_DOORBELL=y
CONFIG_PPC_E500MC=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_PPC_EPAPR_HV_PIC=y
CONFIG_PPC_FPU=y
CONFIG_PPC_FSL_BOOK3E=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_PAGE_SHIFT=12
# CONFIG_PPC_PTDUMP is not set
# CONFIG_PPC_QEMU_E500 is not set
CONFIG_PPC_QUEUED_SPINLOCKS=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_PPC_UDBG_16550=y
CONFIG_PPC_WERROR=y
CONFIG_PPS=y
CONFIG_PTE_64BIT=y
CONFIG_QORIQ_CPUFREQ=y
CONFIG_QORIQ_THERMAL=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
# CONFIG_RAVE_SP_CORE is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_SCOM_DEBUGFS is not set
CONFIG_SCSI=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SG_POOL=y
CONFIG_SLUB_DEBUG=y
CONFIG_SMP=y
CONFIG_SOC_BUS=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_FSL_ESPI=y
CONFIG_SPI_MASTER=y
CONFIG_SRCU=y
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_TARGET_CPU_BOOL=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_THREAD_INFO_IN_TASK=y
CONFIG_THREAD_SHIFT=14
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
# CONFIG_UACCE is not set
# CONFIG_UCLAMP_TASK is not set
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_UAS=y
CONFIG_VDSO32=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_XPS=y
CONFIG_ZLIB_DEFLATE=y
Reference in New Issue Copy Permalink