ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
d7bec5609c
openwrt/target/linux/layerscape/patches-4.4/7014-temp-QE-headers-are-needed-by-FMD.patch

1318 lines
44 KiB
Diff
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
From 03c463111e16f9bae8a659408e5f02333af13239 Mon Sep 17 00:00:00 2001
From: Madalin Bucur <madalin.bucur@freescale.com>
Date: Tue, 5 Jan 2016 15:41:28 +0200
Subject: [PATCH 14/70] temp: QE headers are needed by FMD
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
include/linux/fsl/immap_qe.h | 488 +++++++++++++++++++++++++
include/linux/fsl/qe.h | 810 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1298 insertions(+)
create mode 100644 include/linux/fsl/immap_qe.h
create mode 100644 include/linux/fsl/qe.h
--- /dev/null
+++ b/include/linux/fsl/immap_qe.h
@@ -0,0 +1,488 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors:
+ * Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+ __be32 iadd; /* I-RAM Address Register */
+ __be32 idata; /* I-RAM Data Register */
+ u8 res0[0x04];
+ __be32 iready; /* I-RAM Ready Register */
+ u8 res1[0x70];
+} __packed;
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+ __be32 qicr;
+ __be32 qivec;
+ __be32 qripnr;
+ __be32 qipnr;
+ __be32 qipxcc;
+ __be32 qipycc;
+ __be32 qipwcc;
+ __be32 qipzcc;
+ __be32 qimr;
+ __be32 qrimr;
+ __be32 qicnr;
+ u8 res0[0x4];
+ __be32 qiprta;
+ __be32 qiprtb;
+ u8 res1[0x4];
+ __be32 qricr;
+ u8 res2[0x20];
+ __be32 qhivec;
+ u8 res3[0x1C];
+} __packed;
+
+/* Communications Processor */
+struct cp_qe {
+ __be32 cecr; /* QE command register */
+ __be32 ceccr; /* QE controller configuration register */
+ __be32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ __be16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ __be16 cetmr; /* QE timers mask register */
+ __be32 cetscr; /* QE time-stamp timer control register */
+ __be32 cetsr1; /* QE time-stamp register 1 */
+ __be32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ __be32 cevter; /* QE virtual tasks event register */
+ __be32 cevtmr; /* QE virtual tasks mask register */
+ __be16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ __be16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ __be16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ __be16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ __be16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ __be16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ __be16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ __be16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ __be16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x3A];
+ __be32 ceurnr; /* QE microcode revision number register */
+ u8 res13[0x244];
+} __packed;
+
+/* QE Multiplexer */
+struct qe_mux {
+ __be32 cmxgcr; /* CMX general clock route register */
+ __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ __be32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ __be32 cmxucr[4]; /* CMX UCCx clock route registers */
+ __be32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __packed;
+
+/* QE Timers */
+struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global config register*/
+ u8 res1[0xB];
+ __be16 gtmdr1; /* Timer 1 mode register */
+ __be16 gtmdr2; /* Timer 2 mode register */
+ __be16 gtrfr1; /* Timer 1 reference register */
+ __be16 gtrfr2; /* Timer 2 reference register */
+ __be16 gtcpr1; /* Timer 1 capture register */
+ __be16 gtcpr2; /* Timer 2 capture register */
+ __be16 gtcnr1; /* Timer 1 counter */
+ __be16 gtcnr2; /* Timer 2 counter */
+ __be16 gtmdr3; /* Timer 3 mode register */
+ __be16 gtmdr4; /* Timer 4 mode register */
+ __be16 gtrfr3; /* Timer 3 reference register */
+ __be16 gtrfr4; /* Timer 4 reference register */
+ __be16 gtcpr3; /* Timer 3 capture register */
+ __be16 gtcpr4; /* Timer 4 capture register */
+ __be16 gtcnr3; /* Timer 3 counter */
+ __be16 gtcnr4; /* Timer 4 counter */
+ __be16 gtevr1; /* Timer 1 event register */
+ __be16 gtevr2; /* Timer 2 event register */
+ __be16 gtevr3; /* Timer 3 event register */
+ __be16 gtevr4; /* Timer 4 event register */
+ __be16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __packed;
+
+/* BRG */
+struct qe_brg {
+ __be32 brgc[16]; /* BRG configuration registers */
+ u8 res0[0x40];
+} __packed;
+
+/* SPI */
+struct spi {
+ u8 res0[0x20];
+ __be32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ __be32 spitd; /* SPI transmit data register (cpu mode) */
+ __be32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __packed;
+
+/* SI */
+struct si1 {
+ __be16 sixmr1[4]; /* SI1 TDMx (x = A B C D) mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ __be16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ __be16 siemr1; /* SI1 TDME mode register 16 bits */
+ __be16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ __be16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ __be16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ __be32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __packed;
+
+/* SI Routing Tables */
+struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __packed;
+
+/* USB Controller */
+struct qe_usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __packed;
+
+/* MCC */
+struct qe_mcc {
+ __be32 mcce; /* MCC event register */
+ __be32 mccm; /* MCC mask register */
+ __be32 mccf; /* MCC configuration register */
+ __be32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __packed;
+
+/* QE UCC Slow */
+struct ucc_slow {
+ __be32 gumr_l; /* UCCx general mode register (low) */
+ __be32 gumr_h; /* UCCx general mode register (high) */
+ __be16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ __be16 utodr; /* UCCx transmit on demand register */
+ __be16 udsr; /* UCCx data synchronization register */
+ __be16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ __be16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ __be16 utpt;
+ u8 res4[0x52];
+ u8 guemr; /* UCC general extended mode register */
+} __packed;
+
+/* QE UCC Fast */
+struct ucc_fast {
+ __be32 gumr; /* UCCx general mode register */
+ __be32 upsmr; /* UCCx protocol-specific mode register */
+ __be16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ __be16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ __be32 ucce; /* UCCx event register */
+ __be32 uccm; /* UCCx mask register */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ __be32 urfb; /* UCC receive FIFO base */
+ __be16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ __be16 urfet; /* UCC receive FIFO emergency threshold */
+ __be16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ __be32 utfb; /* UCC transmit FIFO base */
+ __be16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ __be16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ __be16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ __be16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ __be32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+} __packed;
+
+struct ucc {
+ union {
+ struct ucc_slow slow;
+ struct ucc_fast fast;
+ u8 res[0x200]; /* UCC blocks are 512 bytes each */
+ };
+} __packed;
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+ __be32 upgcr; /* UTOPIA/POS general configuration register */
+ __be32 uplpa; /* UTOPIA/POS last PHY address */
+ __be32 uphec; /* ATM HEC register */
+ __be32 upuc; /* UTOPIA/POS UCC configuration */
+ __be32 updc1; /* UTOPIA/POS device 1 configuration */
+ __be32 updc2; /* UTOPIA/POS device 2 configuration */
+ __be32 updc3; /* UTOPIA/POS device 3 configuration */
+ __be32 updc4; /* UTOPIA/POS device 4 configuration */
+ __be32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ __be32 upde1; /* UTOPIA/POS device 1 event */
+ __be32 upde2; /* UTOPIA/POS device 2 event */
+ __be32 upde3; /* UTOPIA/POS device 3 event */
+ __be32 upde4; /* UTOPIA/POS device 4 event */
+ __be16 uprp1;
+ __be16 uprp2;
+ __be16 uprp3;
+ __be16 uprp4;
+ u8 res1[0x8];
+ __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ __be32 uper1; /* Device 1 port enable register */
+ __be32 uper2; /* Device 2 port enable register */
+ __be32 uper3; /* Device 3 port enable register */
+ __be32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __packed;
+
+/* SDMA */
+struct sdma {
+ __be32 sdsr; /* Serial DMA status register */
+ __be32 sdmr; /* Serial DMA mode register */
+ __be32 sdtr1; /* SDMA system bus threshold register */
+ __be32 sdtr2; /* SDMA secondary bus threshold register */
+ __be32 sdhy1; /* SDMA system bus hysteresis register */
+ __be32 sdhy2; /* SDMA secondary bus hysteresis register */
+ __be32 sdta1; /* SDMA system bus address register */
+ __be32 sdta2; /* SDMA secondary bus address register */
+ __be32 sdtm1; /* SDMA system bus MSNUM register */
+ __be32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ __be32 sdaqr; /* SDMA address bus qualify register */
+ __be32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ __be32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __packed;
+
+/* Debug Space */
+struct dbg {
+ __be32 bpdcr; /* Breakpoint debug command register */
+ __be32 bpdsr; /* Breakpoint debug status register */
+ __be32 bpdmr; /* Breakpoint debug mask register */
+ __be32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ __be32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ __be32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ __be32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ __be32 bprmir; /* Breakpoint request mode immediate register */
+ __be32 bprmsr; /* Breakpoint request mode serial register */
+ __be32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __packed;
+
+/*
+ * RISC Special Registers (Trap and Breakpoint). These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+ __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */
+ u8 res0[64];
+ __be32 ibcr0;
+ __be32 ibs0;
+ __be32 ibcnr0;
+ u8 res1[4];
+ __be32 ibcr1;
+ __be32 ibs1;
+ __be32 ibcnr1;
+ __be32 npcr;
+ __be32 dbcr;
+ __be32 dbar;
+ __be32 dbamr;
+ __be32 dbsr;
+ __be32 dbcnr;
+ u8 res2[12];
+ __be32 dbdr_h;
+ __be32 dbdr_l;
+ __be32 dbdmr_h;
+ __be32 dbdmr_l;
+ __be32 bsr;
+ __be32 bor;
+ __be32 bior;
+ u8 res3[4];
+ __be32 iatr[4];
+ __be32 eccr; /* Exception control configuration register */
+ __be32 eicr;
+ u8 res4[0x100-0xf8];
+} __packed;
+
+struct qe_immap {
+ struct qe_iram iram; /* I-RAM */
+ struct qe_ic_regs ic; /* Interrupt Controller */
+ struct cp_qe cp; /* Communications Processor */
+ struct qe_mux qmx; /* QE Multiplexer */
+ struct qe_timers qet; /* QE Timers */
+ struct spi spi[0x2]; /* spi */
+ struct qe_mcc mcc; /* mcc */
+ struct qe_brg brg; /* brg */
+ struct qe_usb_ctlr usb; /* USB */
+ struct si1 si1; /* SI */
+ u8 res11[0x800];
+ struct sir sir; /* SI Routing Tables */
+ struct ucc ucc1; /* ucc1 */
+ struct ucc ucc3; /* ucc3 */
+ struct ucc ucc5; /* ucc5 */
+ struct ucc ucc7; /* ucc7 */
+ u8 res12[0x600];
+ struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/
+ struct ucc ucc2; /* ucc2 */
+ struct ucc ucc4; /* ucc4 */
+ struct ucc ucc6; /* ucc6 */
+ struct ucc ucc8; /* ucc8 */
+ u8 res13[0x600];
+ struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
+ struct sdma sdma; /* SDMA */
+ struct dbg dbg; /* 0x104080 - 0x1040FF
+ Debug Space */
+ struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
+ RISC Special Registers
+ (Trap and Breakpoint) */
+ u8 res14[0x300]; /* 0x104300 - 0x1045FF */
+ u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000
+ Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __packed;
+
+extern struct qe_immap __iomem *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+/*
+ * Returns the offset within the QE address space of the given pointer.
+ *
+ * Note that the QE does not support 36-bit physical addresses, so if
+ * get_qe_base() returns a number above 4GB, the caller will probably fail.
+ */
+static inline phys_addr_t immrbar_virt_to_phys(void *address)
+{
+ void *q = (void *)qe_immr;
+
+ /* Is it a MURAM address? */
+ if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
+ return get_qe_base() + (address - q);
+
+ /* It's an address returned by kmalloc */
+ return virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
--- /dev/null
+++ b/include/linux/fsl/qe.h
@@ -0,0 +1,810 @@
+/*
+ * Copyright (C) 2006, 2012 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Authors: Shlomi Gridish <gridish@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/fsl/immap_qe.h>
+
+#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+extern int siram_init_flag;
+
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_RSYNC_PIN, /* RSYNC from pin */
+ QE_TSYNC_PIN, /* TSYNC from pin */
+ QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+ return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+#else
+static inline void qe_reset(void) {}
+#endif
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+ __be32 cpodr; /* Open drain register */
+ __be32 cpdata; /* Data register */
+ __be32 cpdir1; /* Direction register */
+ __be32 cpdir2; /* Direction register */
+ __be32 cppar1; /* Pin assignment register */
+ __be32 cppar2; /* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+ u8 pad[8];
+#endif
+};
+
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+ int dir, int open_drain, int assignment,
+ int has_irq);
+#ifdef CONFIG_QUICC_ENGINE
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+#else
+static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
+static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq) { return -ENOSYS; }
+static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
+#endif /* CONFIG_QUICC_ENGINE */
+
+/*
+ * Pin multiplexing functions.
+ */
+struct qe_pin;
+#ifdef CONFIG_QE_GPIO
+extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern void qe_pin_free(struct qe_pin *qe_pin);
+extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
+extern void qe_pin_set_dedicated(struct qe_pin *pin);
+#else
+static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+static inline void qe_pin_free(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
+static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
+#endif /* CONFIG_QE_GPIO */
+
+#ifdef CONFIG_QUICC_ENGINE
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+ u32 cmd_input)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+ /*
+ * MPC8568E reference manual says:
+ *
+ * "...power down sequence waits for all I/O interfaces to become idle.
+ * In some applications this may happen eventually without actively
+ * shutting down interfaces, but most likely, software will have to
+ * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+ * interfaces before issuing the command (either the write to the core
+ * MSR[WE] as described above or writing to POWMGTCSR) to put the
+ * device into sleep state."
+ *
+ * MPC8569E reference manual has a similar paragraph.
+ */
+#ifdef CONFIG_PPC_85xx
+ return 0;
+#else
+ return 1;
+#endif
+}
+
+int qe_muram_init(void);
+
+#if defined(CONFIG_QUICC_ENGINE)
+unsigned long qe_muram_alloc(unsigned long size, unsigned long align);
+int qe_muram_free(unsigned long offset);
+unsigned long qe_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *qe_muram_addr(unsigned long offset);
+unsigned long qe_muram_offset(void __iomem *addr);
+dma_addr_t qe_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long qe_muram_alloc(unsigned long size,
+ unsigned long align)
+{
+ return -ENOSYS;
+}
+
+static inline int qe_muram_free(unsigned long offset)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned long qe_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
+{
+ return -ENOSYS;
+}
+
+static inline void __iomem *qe_muram_addr(unsigned long offset)
+{
+ return NULL;
+}
+
+static inline unsigned long qe_muram_offset(void __iomem *addr)
+{
+ return -ENOSYS;
+}
+
+static inline dma_addr_t qe_muram_dma(void __iomem *addr)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_QUICC_ENGINE) */
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe_firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+ struct qe_header {
+ __be32 length; /* Length of the entire structure, in bytes */
+ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
+ u8 version; /* Version of this layout. First ver is '1' */
+ } header;
+ u8 id[62]; /* Null-terminated identifier string */
+ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
+ u8 count; /* Number of microcode[] structures */
+ struct {
+ __be16 model; /* The SOC model */
+ u8 major; /* The SOC revision major */
+ u8 minor; /* The SOC revision minor */
+ } __packed soc;
+ u8 padding[4]; /* Reserved, for alignment */
+ __be64 extended_modes; /* Extended modes */
+ __be32 vtraps[8]; /* Virtual trap addresses */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ struct qe_microcode {
+ u8 id[32]; /* Null-terminated identifier */
+ __be32 traps[16]; /* Trap addresses, 0 == ignore */
+ __be32 eccr; /* The value for the ECCR register */
+ __be32 iram_offset; /* Offset into I-RAM for the code */
+ __be32 count; /* Number of 32-bit words of the code */
+ __be32 code_offset; /* Offset of the actual microcode */
+ u8 major; /* The microcode version major */
+ u8 minor; /* The microcode version minor */
+ u8 revision; /* The microcode version revision */
+ u8 padding; /* Reserved, for alignment */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ } __packed microcode[1];
+ /* All microcode binaries should be located here */
+ /* CRC32 should be located here, after the microcode binaries */
+} __packed;
+
+struct qe_firmware_info {
+ char id[64]; /* Firmware name */
+ u32 vtraps[8]; /* Virtual trap addresses */
+ u64 extended_modes; /* Extended modes */
+};
+
+#ifdef CONFIG_QUICC_ENGINE
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+ __be16 status;
+ __be16 length;
+ __be32 buf;
+} __packed;
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY (0x8000) /* Receive is empty */
+#define BD_SC_READY (0x8000) /* Transmit is ready */
+#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
+#define BD_SC_LAST (0x0800) /* Last buffer in frame */
+#define BD_SC_TC (0x0400) /* Transmit CRC */
+#define BD_SC_CM (0x0200) /* Continuous mode */
+#define BD_SC_ID (0x0100) /* Rec'd too many idles */
+#define BD_SC_P (0x0100) /* xmt preamble */
+#define BD_SC_BR (0x0020) /* Break received */
+#define BD_SC_FR (0x0010) /* Framing error */
+#define BD_SC_PR (0x0008) /* Parity error */
+#define BD_SC_NAK (0x0004) /* NAK - did not respond */
+#define BD_SC_OV (0x0002) /* Overrun */
+#define BD_SC_UN (0x0002) /* Underrun */
+#define BD_SC_CD (0x0001) /* */
+#define BD_SC_CL (0x0001) /* Collision */
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation */
+#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2 | \
+ QE_RISC_ALLOCATION_RISC3 | \
+ QE_RISC_ALLOCATION_RISC4)
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __packed;
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __packed;
+
+/* Communication Direction */
+enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+#define QE_CMXGCR_USBCS_CLK3 0x1
+#define QE_CMXGCR_USBCS_CLK5 0x2
+#define QE_CMXGCR_USBCS_CLK7 0x3
+#define QE_CMXGCR_USBCS_CLK9 0x4
+#define QE_CMXGCR_USBCS_CLK13 0x5
+#define QE_CMXGCR_USBCS_CLK17 0x6
+#define QE_CMXGCR_USBCS_CLK19 0x7
+#define QE_CMXGCR_USBCS_CLK21 0x8
+#define QE_CMXGCR_USBCS_BRG9 0x9
+#define QE_CMXGCR_USBCS_BRG10 0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000c
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_QMC 0x02
+#define QE_CR_PROTOCOL_UART 0x04
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+#define QE_IRAM_READY 0x80000000 /* Ready */
+
+/* UPC */
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+ __be16 rbase; /* RX BD base address */
+ __be16 tbase; /* TX BD base address */
+ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
+ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
+ __be16 mrblr; /* Rx buffer length */
+ __be32 rstate; /* Rx internal state */
+ __be32 rptr; /* Rx internal data pointer */
+ __be16 rbptr; /* rb BD Pointer */
+ __be16 rcount; /* Rx internal byte count */
+ __be32 rtemp; /* Rx temp */
+ __be32 tstate; /* Tx internal state */
+ __be32 tptr; /* Tx internal data pointer */
+ __be16 tbptr; /* Tx BD pointer */
+ __be16 tcount; /* Tx byte count */
+ __be32 ttemp; /* Tx temp */
+ __be32 rcrc; /* temp receive CRC */
+ __be32 tcrc; /* temp transmit CRC */
+} __packed;
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB 0x0200
+#define UCC_UART_UCCE_IDLE 0x0100
+#define UCC_UART_UCCE_GRA 0x0080
+#define UCC_UART_UCCE_BRKE 0x0040
+#define UCC_UART_UCCE_BRKS 0x0020
+#define UCC_UART_UCCE_CCR 0x0008
+#define UCC_UART_UCCE_BSY 0x0004
+#define UCC_UART_UCCE_TX 0x0002
+#define UCC_UART_UCCE_RX 0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR 0x1000
+#define UCC_HDLC_UCCE_GLT 0x0800
+#define UCC_HDLC_UCCE_IDLE 0x0100
+#define UCC_HDLC_UCCE_BRKE 0x0040
+#define UCC_HDLC_UCCE_BRKS 0x0020
+#define UCC_HDLC_UCCE_TXE 0x0010
+#define UCC_HDLC_UCCE_RXF 0x0008
+#define UCC_HDLC_UCCE_BSY 0x0004
+#define UCC_HDLC_UCCE_TXB 0x0002
+#define UCC_HDLC_UCCE_RXB 0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA 0x0080
+#define UCC_BISYNC_UCCE_TXE 0x0010
+#define UCC_BISYNC_UCCE_RCH 0x0008
+#define UCC_BISYNC_UCCE_BSY 0x0004
+#define UCC_BISYNC_UCCE_TXB 0x0002
+#define UCC_BISYNC_UCCE_RXB 0x0001
+
+/* Transparent UCC Event Register (UCCE) */
+#define UCC_TRANS_UCCE_GRA 0x0080
+#define UCC_TRANS_UCCE_TXE 0x0010
+#define UCC_TRANS_UCCE_RXF 0x0008
+#define UCC_TRANS_UCCE_BSY 0x0004
+#define UCC_TRANS_UCCE_TXB 0x0002
+#define UCC_TRANS_UCCE_RXB 0x0001
+
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD 0x80000000
+#define UCC_GETH_UCCE_SCAR 0x40000000
+#define UCC_GETH_UCCE_GRA 0x20000000
+#define UCC_GETH_UCCE_CBPR 0x10000000
+#define UCC_GETH_UCCE_BSY 0x08000000
+#define UCC_GETH_UCCE_RXC 0x04000000
+#define UCC_GETH_UCCE_TXC 0x02000000
+#define UCC_GETH_UCCE_TXE 0x01000000
+#define UCC_GETH_UCCE_TXB7 0x00800000
+#define UCC_GETH_UCCE_TXB6 0x00400000
+#define UCC_GETH_UCCE_TXB5 0x00200000
+#define UCC_GETH_UCCE_TXB4 0x00100000
+#define UCC_GETH_UCCE_TXB3 0x00080000
+#define UCC_GETH_UCCE_TXB2 0x00040000
+#define UCC_GETH_UCCE_TXB1 0x00020000
+#define UCC_GETH_UCCE_TXB0 0x00010000
+#define UCC_GETH_UCCE_RXB7 0x00008000
+#define UCC_GETH_UCCE_RXB6 0x00004000
+#define UCC_GETH_UCCE_RXB5 0x00002000
+#define UCC_GETH_UCCE_RXB4 0x00001000
+#define UCC_GETH_UCCE_RXB3 0x00000800
+#define UCC_GETH_UCCE_RXB2 0x00000400
+#define UCC_GETH_UCCE_RXB1 0x00000200
+#define UCC_GETH_UCCE_RXB0 0x00000100
+#define UCC_GETH_UCCE_RXF7 0x00000080
+#define UCC_GETH_UCCE_RXF6 0x00000040
+#define UCC_GETH_UCCE_RXF5 0x00000020
+#define UCC_GETH_UCCE_RXF4 0x00000010
+#define UCC_GETH_UCCE_RXF3 0x00000008
+#define UCC_GETH_UCCE_RXF2 0x00000004
+#define UCC_GETH_UCCE_RXF1 0x00000002
+#define UCC_GETH_UCCE_RXF0 0x00000001
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
+#define UCC_UART_UPSMR_FLC 0x8000
+#define UCC_UART_UPSMR_SL 0x4000
+#define UCC_UART_UPSMR_CL_MASK 0x3000
+#define UCC_UART_UPSMR_CL_8 0x3000
+#define UCC_UART_UPSMR_CL_7 0x2000
+#define UCC_UART_UPSMR_CL_6 0x1000
+#define UCC_UART_UPSMR_CL_5 0x0000
+#define UCC_UART_UPSMR_UM_MASK 0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL 0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
+#define UCC_UART_UPSMR_FRZ 0x0200
+#define UCC_UART_UPSMR_RZS 0x0100
+#define UCC_UART_UPSMR_SYN 0x0080
+#define UCC_UART_UPSMR_DRT 0x0040
+#define UCC_UART_UPSMR_PEN 0x0010
+#define UCC_UART_UPSMR_RPM_MASK 0x000c
+#define UCC_UART_UPSMR_RPM_ODD 0x0000
+#define UCC_UART_UPSMR_RPM_LOW 0x0004
+#define UCC_UART_UPSMR_RPM_EVEN 0x0008
+#define UCC_UART_UPSMR_RPM_HIGH 0x000C
+#define UCC_UART_UPSMR_TPM_MASK 0x0003
+#define UCC_UART_UPSMR_TPM_ODD 0x0000
+#define UCC_UART_UPSMR_TPM_LOW 0x0001
+#define UCC_UART_UPSMR_TPM_EVEN 0x0002
+#define UCC_UART_UPSMR_TPM_HIGH 0x0003
+
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE 0x80000000
+#define UCC_GETH_UPSMR_PTPE 0x40000000
+#define UCC_GETH_UPSMR_ECM 0x04000000
+#define UCC_GETH_UPSMR_HSE 0x02000000
+#define UCC_GETH_UPSMR_PRO 0x00400000
+#define UCC_GETH_UPSMR_CAP 0x00200000
+#define UCC_GETH_UPSMR_RSH 0x00100000
+#define UCC_GETH_UPSMR_RPM 0x00080000
+#define UCC_GETH_UPSMR_R10M 0x00040000
+#define UCC_GETH_UPSMR_RLPB 0x00020000
+#define UCC_GETH_UPSMR_TBIM 0x00010000
+#define UCC_GETH_UPSMR_RES1 0x00002000
+#define UCC_GETH_UPSMR_RMM 0x00001000
+#define UCC_GETH_UPSMR_CAM 0x00000400
+#define UCC_GETH_UPSMR_BRO 0x00000200
+#define UCC_GETH_UPSMR_SMM 0x00000080
+#define UCC_GETH_UPSMR_SGMM 0x00000020
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL 0x20
+#define UCC_BMR_BO_BE 0x10
+#define UCC_BMR_CETM 0x04
+#define UCC_BMR_DTB 0x02
+#define UCC_BMR_BDB 0x01
+
+/* Function code masks */
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
Reference in New Issue Copy Permalink