openwrt/target/linux/ramips/dts/WL-WN575A3.dts

/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

#include "mt7628an.dtsi"

/ {
	compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
	model = "Wavlink WL-WN575A3";

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x4000000>;
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		wifi-high {
			label = "wl-wn575a3:green:wifi-high";
			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
		};

		wifi-med {
			label = "wl-wn575a3:green:wifi-med";
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
		};

		wifi-low {
			label = "wl-wn575a3:green:wifi-low";
			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
		};

		wps {
			label = "wl-wn575a3:green:wps";
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "wled_an";
			ralink,function = "gpio";
		};
	};
};

&pcie {
	status = "okay";
	pcie-bridge {
		mt76@0,0 {
			reg = <0x0000 0 0 0 0>;
			device_type = "pci";
			mediatek,mtd-eeprom = <&factory 0x8000>;
			mediatek,2ghz = <0>;
		};
	};
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		linux,modalias = "m25p80", "en25q64";
		spi-max-frequency = <10000000>;
		m25p,chunked-io = <32>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x7b0000>;
		};
	};
};

&wmac {
	status = "okay";
	ralink,mtd-eeprom = <&factory 0x4>;
};

&ethernet {
	mtd-mac-address = <&factory 0x2e>;
	ralink,port-map = "llllw";
};