openwrt/target/linux/brcm2708/patches-4.19/950-0702-overlays-Add-PCF2129-RTC.patch

From 2308f60bb68de69306c542de3983be0007cad37b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 15 Jul 2019 10:39:05 +0100
Subject: [PATCH 702/806] overlays: Add PCF2129 RTC

Add support for the PCF2129 RTC to i2c-rtc and i2c-rtc-gpio overlays.
Also add rv3028 to i2c-rtc-gpio (it was missed previously), and don't
attempt to set an alternate address for the PCF2127.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
 arch/arm/boot/dts/overlays/README             | 11 ++++-
 .../dts/overlays/i2c-rtc-gpio-overlay.dts     | 41 +++++++++++++++++--
 .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 19 ++++++++-
 3 files changed, 64 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1022,6 +1022,8 @@ Params: abx80x                  Select o
 
         pcf2127                 Select the PCF2127 device
 
+        pcf2129                 Select the PCF2129 device
+
         pcf8523                 Select the PCF8523 device
 
         pcf8563                 Select the PCF8563 device
@@ -1067,10 +1069,14 @@ Params: abx80x                  Select o
 
         pcf2127                 Select the PCF2127 device
 
+        pcf2129                 Select the PCF2129 device
+
         pcf8523                 Select the PCF8523 device
 
         pcf8563                 Select the PCF8563 device
 
+        rv3028                  Select the Micro Crystal RV3028 device
+
         addr                    Sets the address for the RTC. Note that the
                                 device must be configured to use the specified
                                 address.
@@ -1079,11 +1085,14 @@ Params: abx80x                  Select o
                                 "schottky" (ABx80x only)
 
         trickle-resistor-ohms   Resistor value for trickle charge (DS1339,
-                                ABx80x)
+                                ABx80x, RV3028)
 
         wakeup-source           Specify that the RTC can be used as a wakeup
                                 source
 
+        backup-switchover-mode  Backup power supply switch mode. Must be 0 for
+                                off or 1 for Vdd < VBackup (RV3028 only)
+
         i2c_gpio_sda            GPIO used for I2C data (default "23")
 
         i2c_gpio_scl            GPIO used for I2C clock (default "24")
--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
@@ -121,7 +121,7 @@
 			#size-cells = <0>;
 			status = "okay";
 
-			pcf2127: pcf2127@51 {
+			pcf2127@51 {
 				compatible = "nxp,pcf2127";
 				reg = <0x51>;
 				status = "okay";
@@ -174,6 +174,36 @@
 		};
 	};
 
+	fragment@11 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			rv3028: rv3028@52 {
+				compatible = "microcrystal,rv3028";
+				reg = <0x52>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@12 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcf2129@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				status = "okay";
+			};
+		};
+	};
+
 	__overrides__ {
 		abx80x = <0>,"+1";
 		ds1307 = <0>,"+2";
@@ -185,6 +215,8 @@
 		pcf8523 = <0>,"+8";
 		pcf8563 = <0>,"+9";
 		m41t62 = <0>,"+10";
+		rv3028 = <0>,"+11";
+		pcf2129 = <0>,"+12";
 
 		addr = <&abx80x>, "reg:0",
 		       <&ds1307>, "reg:0",
@@ -192,18 +224,19 @@
 		       <&ds3231>, "reg:0",
 		       <&mcp7940x>, "reg:0",
 		       <&mcp7941x>, "reg:0",
-		       <&pcf2127>, "reg:0",
 		       <&pcf8523>, "reg:0",
 		       <&pcf8563>, "reg:0",
 		       <&m41t62>, "reg:0";
 
 		trickle-diode-type = <&abx80x>,"abracon,tc-diode";
 		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
-					<&abx80x>,"abracon,tc-resistor";
+					<&abx80x>,"abracon,tc-resistor",
+					<&rv3028>,"trickle-resistor-ohms:0";
+		backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0";
 		wakeup-source = <&ds1339>,"wakeup-source?",
 				<&ds3231>,"wakeup-source?",
 				<&mcp7940x>,"wakeup-source?",
-					<&mcp7941x>,"wakeup-source?";
+				<&mcp7941x>,"wakeup-source?";
 		i2c_gpio_sda = <&i2c_gpio>,"gpios:4";
 		i2c_gpio_scl = <&i2c_gpio>,"gpios:16";
 		i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0";
--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
@@ -105,7 +105,7 @@
 			#size-cells = <0>;
 			status = "okay";
 
-			pcf2127: pcf2127@51 {
+			pcf2127@51 {
 				compatible = "nxp,pcf2127";
 				reg = <0x51>;
 				status = "okay";
@@ -173,6 +173,21 @@
 		};
 	};
 
+	fragment@11 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcf2129@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				status = "okay";
+			};
+		};
+	};
+
 	__overrides__ {
 		abx80x = <0>,"+0";
 		ds1307 = <0>,"+1";
@@ -185,6 +200,7 @@
 		pcf8563 = <0>,"+8";
 		m41t62 = <0>,"+9";
 		rv3028 = <0>,"+10";
+		pcf2129 = <0>,"+11";
 
 		addr = <&abx80x>, "reg:0",
 		       <&ds1307>, "reg:0",
@@ -192,7 +208,6 @@
 		       <&ds3231>, "reg:0",
 		       <&mcp7940x>, "reg:0",
 		       <&mcp7941x>, "reg:0",
-		       <&pcf2127>, "reg:0",
 		       <&pcf8523>, "reg:0",
 		       <&pcf8563>, "reg:0",
 		       <&m41t62>, "reg:0";