openwrt/target/linux/generic/backport-6.1/790-v6.4-0012-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch

From b361015763fedea439f13b336b15ef7bdf1f7d4f Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Mon, 3 Apr 2023 02:19:40 +0100
Subject: [PATCH 12/13] net: dsa: mt7530: introduce driver for MT7988 built-in
 switch

Add driver for the built-in Gigabit Ethernet switch which can be found
in the MediaTek MT7988 SoC.

The switch shares most of its design with MT7530 and MT7531, but has
it's registers mapped into the SoCs register space rather than being
connected externally or internally via MDIO.

Introduce a new platform driver to support that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS                   |   2 +
 drivers/net/dsa/Kconfig       |  12 +++
 drivers/net/dsa/Makefile      |   1 +
 drivers/net/dsa/mt7530-mmio.c | 101 +++++++++++++++++++++++++
 drivers/net/dsa/mt7530.c      | 135 +++++++++++++++++++++++++++++++++-
 drivers/net/dsa/mt7530.h      |  12 +--
 6 files changed, 253 insertions(+), 10 deletions(-)
 create mode 100644 drivers/net/dsa/mt7530-mmio.c

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13067,9 +13067,11 @@ MEDIATEK SWITCH DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 M:	Landen Chao <Landen.Chao@mediatek.com>
 M:	DENG Qingfang <dqfext@gmail.com>
+M:	Daniel Golle <daniel@makrotopia.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/dsa/mt7530-mdio.c
+F:	drivers/net/dsa/mt7530-mmio.c
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c
 
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -38,6 +38,7 @@ config NET_DSA_MT7530
 	select NET_DSA_TAG_MTK
 	select MEDIATEK_GE_PHY
 	imply NET_DSA_MT7530_MDIO
+	imply NET_DSA_MT7530_MMIO
 	help
 	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
 	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
@@ -54,6 +55,17 @@ config NET_DSA_MT7530_MDIO
 	  module MT7530 which can be found in the MT7621AT, MT7621DAT,
 	  MT7621ST and MT7623AI SoCs.
 
+config NET_DSA_MT7530_MMIO
+	tristate "MediaTek MT7530 MMIO interface driver"
+	depends on NET_DSA_MT7530
+	depends on HAS_IOMEM
+	help
+	  This enables support for the built-in Ethernet switch found
+	  in the MediaTek MT7988 SoC.
+	  The switch is a similar design as MT7531, but the switch registers
+	  are directly mapped into the SoCs register space rather than being
+	  accessible via MDIO.
+
 config NET_DSA_MV88E6060
 	tristate "Marvell 88E6060 ethernet switch chip support"
 	select NET_DSA_TAG_TRAILER
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -8,6 +8,7 @@ endif
 obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
+obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
--- /dev/null
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+
+#include "mt7530.h"
+
+static const struct of_device_id mt7988_of_match[] = {
+	{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7988_of_match);
+
+static int
+mt7988_probe(struct platform_device *pdev)
+{
+	static struct regmap_config *sw_regmap_config;
+	struct mt7530_priv *priv;
+	void __iomem *base_addr;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->bus = NULL;
+	priv->dev = &pdev->dev;
+
+	ret = mt7530_probe_common(priv);
+	if (ret)
+		return ret;
+
+	priv->rstc = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->rstc)) {
+		dev_err(&pdev->dev, "Couldn't get our reset line\n");
+		return PTR_ERR(priv->rstc);
+	}
+
+	base_addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base_addr)) {
+		dev_err(&pdev->dev, "cannot request I/O memory space\n");
+		return -ENXIO;
+	}
+
+	sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL);
+	if (!sw_regmap_config)
+		return -ENOMEM;
+
+	sw_regmap_config->name = "switch";
+	sw_regmap_config->reg_bits = 16;
+	sw_regmap_config->val_bits = 32;
+	sw_regmap_config->reg_stride = 4;
+	sw_regmap_config->max_register = MT7530_CREV;
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	return dsa_register_switch(priv->ds);
+}
+
+static int
+mt7988_remove(struct platform_device *pdev)
+{
+	struct mt7530_priv *priv = platform_get_drvdata(pdev);
+
+	if (priv)
+		mt7530_remove_common(priv);
+
+	return 0;
+}
+
+static void mt7988_shutdown(struct platform_device *pdev)
+{
+	struct mt7530_priv *priv = platform_get_drvdata(pdev);
+
+	if (!priv)
+		return;
+
+	dsa_switch_shutdown(priv->ds);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct platform_driver mt7988_platform_driver = {
+	.probe  = mt7988_probe,
+	.remove = mt7988_remove,
+	.shutdown = mt7988_shutdown,
+	.driver = {
+		.name = "mt7530-mmio",
+		.of_match_table = mt7988_of_match,
+	},
+};
+module_platform_driver(mt7988_platform_driver);
+
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MMIO)");
+MODULE_LICENSE("GPL");
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2005,6 +2005,47 @@ static const struct irq_domain_ops mt753
 };
 
 static void
+mt7988_irq_mask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable &= ~BIT(d->hwirq);
+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+}
+
+static void
+mt7988_irq_unmask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable |= BIT(d->hwirq);
+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+}
+
+static struct irq_chip mt7988_irq_chip = {
+	.name = KBUILD_MODNAME,
+	.irq_mask = mt7988_irq_mask,
+	.irq_unmask = mt7988_irq_unmask,
+};
+
+static int
+mt7988_irq_map(struct irq_domain *domain, unsigned int irq,
+	       irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, domain->host_data);
+	irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq);
+	irq_set_nested_thread(irq, true);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mt7988_irq_domain_ops = {
+	.map = mt7988_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void
 mt7530_setup_mdio_irq(struct mt7530_priv *priv)
 {
 	struct dsa_switch *ds = priv->ds;
@@ -2038,8 +2079,15 @@ mt7530_setup_irq(struct mt7530_priv *pri
 		return priv->irq ? : -EINVAL;
 	}
 
-	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
-						 &mt7530_irq_domain_ops, priv);
+	if (priv->id == ID_MT7988)
+		priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+							 &mt7988_irq_domain_ops,
+							 priv);
+	else
+		priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+							 &mt7530_irq_domain_ops,
+							 priv);
+
 	if (!priv->irq_domain) {
 		dev_err(dev, "failed to create IRQ domain\n");
 		return -ENOMEM;
@@ -2538,6 +2586,25 @@ static void mt7531_mac_port_get_caps(str
 	}
 }
 
+static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
+{
+	phy_interface_zero(config->supported_interfaces);
+
+	switch (port) {
+	case 0 ... 4: /* Internal phy */
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		break;
+
+	case 6:
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					   MAC_10000FD;
+	}
+}
+
 static int
 mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
 {
@@ -2614,6 +2681,17 @@ static bool mt753x_is_mac_port(u32 port)
 }
 
 static int
+mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+		  phy_interface_t interface)
+{
+	if (dsa_is_cpu_port(ds, port) &&
+	    interface == PHY_INTERFACE_MODE_INTERNAL)
+		return 0;
+
+	return -EINVAL;
+}
+
+static int
 mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		  phy_interface_t interface)
 {
@@ -2683,7 +2761,8 @@ mt753x_phylink_mac_config(struct dsa_swi
 
 	switch (port) {
 	case 0 ... 4: /* Internal phy */
-		if (state->interface != PHY_INTERFACE_MODE_GMII)
+		if (state->interface != PHY_INTERFACE_MODE_GMII &&
+		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
 			goto unsupported;
 		break;
 	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
@@ -2761,7 +2840,8 @@ static void mt753x_phylink_mac_link_up(s
 	/* MT753x MAC works in 1G full duplex mode for all up-clocked
 	 * variants.
 	 */
-	if (interface == PHY_INTERFACE_MODE_TRGMII ||
+	if (interface == PHY_INTERFACE_MODE_INTERNAL ||
+	    interface == PHY_INTERFACE_MODE_TRGMII ||
 	    (phy_interface_mode_is_8023z(interface))) {
 		speed = SPEED_1000;
 		duplex = DUPLEX_FULL;
@@ -2841,6 +2921,21 @@ mt7531_cpu_port_config(struct dsa_switch
 	return 0;
 }
 
+static int
+mt7988_cpu_port_config(struct dsa_switch *ds, int port)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	mt7530_write(priv, MT7530_PMCR_P(port),
+		     PMCR_CPU_PORT_SETTING(priv->id));
+
+	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED,
+				   PHY_INTERFACE_MODE_INTERNAL, NULL,
+				   SPEED_10000, DUPLEX_FULL, true, true);
+
+	return 0;
+}
+
 static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
 				    struct phylink_config *config)
 {
@@ -2986,6 +3081,27 @@ static int mt753x_set_mac_eee(struct dsa
 	return 0;
 }
 
+static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
+{
+	return 0;
+}
+
+static int mt7988_setup(struct dsa_switch *ds)
+{
+	struct mt7530_priv *priv = ds->priv;
+
+	/* Reset the switch */
+	reset_control_assert(priv->rstc);
+	usleep_range(20, 50);
+	reset_control_deassert(priv->rstc);
+	usleep_range(20, 50);
+
+	/* Reset the switch PHYs */
+	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
+
+	return mt7531_setup_common(ds);
+}
+
 const struct dsa_switch_ops mt7530_switch_ops = {
 	.get_tag_protocol	= mtk_get_tag_protocol,
 	.setup			= mt753x_setup,
@@ -3054,6 +3170,17 @@ const struct mt753x_info mt753x_table[]
 		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.mac_port_config = mt7531_mac_config,
 	},
+	[ID_MT7988] = {
+		.id = ID_MT7988,
+		.pcs_ops = &mt7530_pcs_ops,
+		.sw_setup = mt7988_setup,
+		.phy_read = mt7531_ind_phy_read,
+		.phy_write = mt7531_ind_phy_write,
+		.pad_setup = mt7988_pad_setup,
+		.cpu_port_config = mt7988_cpu_port_config,
+		.mac_port_get_caps = mt7988_mac_port_get_caps,
+		.mac_port_config = mt7988_mac_config,
+	},
 };
 EXPORT_SYMBOL_GPL(mt753x_table);
 
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -18,6 +18,7 @@ enum mt753x_id {
 	ID_MT7530 = 0,
 	ID_MT7621 = 1,
 	ID_MT7531 = 2,
+	ID_MT7988 = 3,
 };
 
 #define	NUM_TRGMII_CTRL			5
@@ -54,11 +55,11 @@ enum mt753x_id {
 #define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
 #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
 
-#define MT753X_MIRROR_REG(id)		(((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_REG(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
 					 MT7531_CFC : MT7530_MFC)
-#define MT753X_MIRROR_EN(id)		(((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_EN(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
 					 MT7531_MIRROR_EN : MIRROR_EN)
-#define MT753X_MIRROR_MASK(id)		(((id) == ID_MT7531) ? \
+#define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
 					 MT7531_MIRROR_MASK : MIRROR_MASK)
 
 /* Registers for BPDU and PAE frame control*/
@@ -302,9 +303,8 @@ enum mt7530_vlan_port_acc_frm {
 					 MT7531_FORCE_DPX | \
 					 MT7531_FORCE_RX_FC | \
 					 MT7531_FORCE_TX_FC)
-#define  PMCR_FORCE_MODE_ID(id)		(((id) == ID_MT7531) ? \
-					 MT7531_FORCE_MODE : \
-					 PMCR_FORCE_MODE)
+#define  PMCR_FORCE_MODE_ID(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
+					 MT7531_FORCE_MODE : PMCR_FORCE_MODE)
 #define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
 					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \