openwrt/target/linux/bcm27xx/patches-6.6/950-0781-media-rp1-Drop-LE-handling.patch

From 35bdac469b974f1fcca32c31dec90867c7fe1fa4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Tue, 16 May 2023 15:51:54 +0300
Subject: [PATCH 0781/1085] media: rp1: Drop LE handling

The driver registers for line-end interrupts, but never uses them. This
just causes extra interrupt load, with more complexity in the driver.

Drop the LE handling. It can easily be added back if later needed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 .../media/platform/raspberrypi/rp1_cfe/cfe.c  |  6 ++--
 .../media/platform/raspberrypi/rp1_cfe/csi2.c | 28 ++++---------------
 .../media/platform/raspberrypi/rp1_cfe/csi2.h |  2 +-
 3 files changed, 10 insertions(+), 26 deletions(-)

--- a/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
@@ -734,13 +734,13 @@ static irqreturn_t cfe_isr(int irq, void
 {
 	struct cfe_device *cfe = dev;
 	unsigned int i;
-	bool sof[NUM_NODES] = {0}, eof[NUM_NODES] = {0}, lci[NUM_NODES] = {0};
+	bool sof[NUM_NODES] = {0}, eof[NUM_NODES] = {0};
 	u32 sts;
 
 	sts = cfg_reg_read(cfe, MIPICFG_INTS);
 
 	if (sts & MIPICFG_INT_CSI_DMA)
-		csi2_isr(&cfe->csi2, sof, eof, lci);
+		csi2_isr(&cfe->csi2, sof, eof);
 
 	if (sts & MIPICFG_INT_PISP_FE)
 		pisp_fe_isr(&cfe->fe, sof + CSI2_NUM_CHANNELS,
@@ -757,7 +757,7 @@ static irqreturn_t cfe_isr(int irq, void
 		 * generate interrupts even though the node is not streaming.
 		 */
 		if (!check_state(cfe, NODE_STREAMING, i) ||
-		    !(sof[i] || eof[i] || lci[i]))
+		    !(sof[i] || eof[i]))
 			continue;
 
 		/*
--- a/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c
@@ -258,7 +258,7 @@ static void csi2_isr_handle_errors(struc
 	spin_unlock(&csi2->errors_lock);
 }
 
-void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof, bool *lci)
+void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof)
 {
 	unsigned int i;
 	u32 status;
@@ -290,7 +290,6 @@ void csi2_isr(struct csi2_device *csi2,
 
 		sof[i] = !!(status & IRQ_FS(i));
 		eof[i] = !!(status & IRQ_FE_ACK(i));
-		lci[i] = !!(status & IRQ_LE_ACK(i));
 	}
 
 	if (csi2_track_errors)
@@ -405,16 +404,12 @@ void csi2_start_channel(struct csi2_devi
 
 	csi2_dbg("%s [%u]\n", __func__, channel);
 
-	/*
-	 * Disable the channel, but ensure N != 0!  Otherwise we end up with a
-	 * spurious LE + LE_ACK interrupt when re-enabling the channel.
-	 */
-	csi2_reg_write(csi2, CSI2_CH_CTRL(channel), 0x100 << __ffs(LC_MASK));
+	csi2_reg_write(csi2, CSI2_CH_CTRL(channel), 0);
 	csi2_reg_write(csi2, CSI2_CH_DEBUG(channel), 0);
 	csi2_reg_write(csi2, CSI2_STATUS, IRQ_CH_MASK(channel));
 
-	/* Enable channel and FS/FE/LE interrupts. */
-	ctrl = DMA_EN | IRQ_EN_FS | IRQ_EN_FE_ACK | IRQ_EN_LE_ACK | PACK_LINE;
+	/* Enable channel and FS/FE interrupts. */
+	ctrl = DMA_EN | IRQ_EN_FS | IRQ_EN_FE_ACK | PACK_LINE;
 	/* PACK_BYTES ensures no striding for embedded data. */
 	if (pack_bytes)
 		ctrl |= PACK_BYTES;
@@ -423,21 +418,11 @@ void csi2_start_channel(struct csi2_devi
 		ctrl |= AUTO_ARM;
 
 	if (width && height) {
-		int line_int_freq = height >> 2;
-
-		line_int_freq = min(max(0x80, line_int_freq), 0x3ff);
-		set_field(&ctrl, line_int_freq, LC_MASK);
 		set_field(&ctrl, mode, CH_MODE_MASK);
 		csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel),
 			       (height << 16) | width);
 	} else {
-		/*
-		 * Do not disable line interrupts for the embedded data channel,
-		 * set it to the maximum value.  This avoids spamming the ISR
-		 * with spurious line interrupts.
-		 */
-		set_field(&ctrl, 0x3ff, LC_MASK);
-		set_field(&ctrl, 0x00, CH_MODE_MASK);
+		set_field(&ctrl, 0x0, CH_MODE_MASK);
 		csi2_reg_write(csi2, CSI2_CH_FRAME_SIZE(channel), 0);
 	}
 
@@ -452,8 +437,7 @@ void csi2_stop_channel(struct csi2_devic
 	csi2_dbg("%s [%u]\n", __func__, channel);
 
 	/* Channel disable.  Use FORCE to allow stopping mid-frame. */
-	csi2_reg_write(csi2, CSI2_CH_CTRL(channel),
-		       (0x100 << __ffs(LC_MASK)) | FORCE);
+	csi2_reg_write(csi2, CSI2_CH_CTRL(channel), FORCE);
 	/* Latch the above change by writing to the ADDR0 register. */
 	csi2_reg_write(csi2, CSI2_CH_ADDR0(channel), 0);
 	/* Write this again, the HW needs it! */
--- a/drivers/media/platform/raspberrypi/rp1_cfe/csi2.h
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/csi2.h
@@ -71,7 +71,7 @@ struct csi2_device {
 	u32 discards_dt_table[DISCARDS_TABLE_NUM_ENTRIES];
 };
 
-void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof, bool *lci);
+void csi2_isr(struct csi2_device *csi2, bool *sof, bool *eof);
 void csi2_set_buffer(struct csi2_device *csi2, unsigned int channel,
 		     dma_addr_t dmaaddr, unsigned int stride,
 		     unsigned int size);