openwrt/package/network/utils/comgt/files/runcommand.gcom

# run AT-command from environment
opengt
 set com 115200n81
 set senddelay 0.02
 waitquiet 1 0.2
 flash 0.1

:start
 print "sending -> ",$env("COMMAND"),"\n"
 send $env("COMMAND")
 send "^m"

 waitfor 25 "OK","ERR","ERROR","COMMAND NOT SUPPORT"
 if % = 0 goto continue
 if % = 1 goto error
 if % = 2 goto error
 if % = 3 goto notsupported

 print "Timeout running AT-command\n"
 exit 1

:error
 print "Error running AT-command\n"
 exit 1

:notsupported
 print "AT-command not supported\n"
 exit 1

:continue
 exit 0
comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00			`# run AT-command from environment`
			`opengt`
			`set com 115200n81`
			`set senddelay 0.02`
			`waitquiet 1 0.2`
			`flash 0.1`

			`:start`
comgt-ncm: Fix NCM protocol This patch fixes the NCM protocol by adding the missing ifname to the netifd script and changing one unintended "send" statement to "print" in runcommand.gcom. It also cleans up logging and makes the manufacturer names case-insensitive. Furthermore, comgt-ncm should not depend on the USB-serial-related kernel modules, as the cdc-wdm control device works without them. There is also no need to depend on kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson and Samsung) which use other kernel modules should also be supported. I'd appreciate if someone with Samsung or Sony-Ericsson modems could test this, I was only able to test it with Huawei E3276, E3372 and E353. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44182 2015-01-28 19:19:33 +00:00			`print "sending -> ",$env("COMMAND"),"\n"`
comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00			`send $env("COMMAND")`
comgt: fix typo in the ncm proto handler Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43071 2014-10-26 16:57:38 +00:00			`send "^m"`
comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00
comgt: increase timeout on runcommands Some combination of modem/wireless operator requires more time to execute the commands. Tested on DWR-512 embedded wwan modem and italian operator iliad (new virtual operator). Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> 2018-08-26 08:52:27 +00:00			`waitfor 25 "OK","ERR","ERROR","COMMAND NOT SUPPORT"`
comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00			`if % = 0 goto continue`
			`if % = 1 goto error`
			`if % = 2 goto error`
comgt-ncm: Fix NCM protocol This patch fixes the NCM protocol by adding the missing ifname to the netifd script and changing one unintended "send" statement to "print" in runcommand.gcom. It also cleans up logging and makes the manufacturer names case-insensitive. Furthermore, comgt-ncm should not depend on the USB-serial-related kernel modules, as the cdc-wdm control device works without them. There is also no need to depend on kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson and Samsung) which use other kernel modules should also be supported. I'd appreciate if someone with Samsung or Sony-Ericsson modems could test this, I was only able to test it with Huawei E3276, E3372 and E353. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44182 2015-01-28 19:19:33 +00:00			`if % = 3 goto notsupported`
comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00
			`print "Timeout running AT-command\n"`
			`exit 1`

			`:error`
			`print "Error running AT-command\n"`
			`exit 1`

comgt-ncm: Fix NCM protocol This patch fixes the NCM protocol by adding the missing ifname to the netifd script and changing one unintended "send" statement to "print" in runcommand.gcom. It also cleans up logging and makes the manufacturer names case-insensitive. Furthermore, comgt-ncm should not depend on the USB-serial-related kernel modules, as the cdc-wdm control device works without them. There is also no need to depend on kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson and Samsung) which use other kernel modules should also be supported. I'd appreciate if someone with Samsung or Sony-Ericsson modems could test this, I was only able to test it with Huawei E3276, E3372 and E353. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44182 2015-01-28 19:19:33 +00:00			`:notsupported`
			`print "AT-command not supported\n"`
			`exit 1`

comgt: add ncm proto support This will not work for all board/dongle combinations until we hit 3.17. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 42866 2014-10-10 08:56:33 +00:00			`:continue`
			`exit 0`