openwrt/target/linux/ramips/rt305x/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=rt305x
BOARDNAME:=RT3x5x/RT5350 based boards
FEATURES+=usb ramdisk
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-rt2800-soc wpad-mini

define Target/Description
	Build firmware images for Ralink RT3x5x/RT5350 based boards.
endef
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

			`SUBTARGET:=rt305x`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 15:59:56 +00:00			`BOARDNAME:=RT3x5x/RT5350 based boards`
ramips: improve and fix Memory 2 Move support This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44072 2015-01-22 09:35:12 +00:00			`FEATURES+=usb ramdisk`
ramips: switch from 24kec to 24kc Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 2016-08-08 11:27:04 +02:00			`CPU_TYPE:=24kc`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
ramips: purge default packages on MT7621 In order to have a smaller initramfs image remove all packages not needed on all devices and add them explicitely for those actually needing them. Also remove wpad-mini from ramips default package set and add it to all sub-targets except for MT7621. While at it reorder packages alphabetically and replace kmod-mt76 with kmod-mt7603 and/or kmod-mt76x2 depending on the chip actually used on a specific board. Hopefully fixes FS#758 Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2017-05-04 14:07:47 +02:00			`DEFAULT_PACKAGES += kmod-rt2800-soc wpad-mini`
ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145 2014-06-11 17:01:19 +00:00
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`define Target/Description`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 15:59:56 +00:00			`Build firmware images for Ralink RT3x5x/RT5350 based boards.`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`endef`