openwrt/target/linux/starfive/patches-6.6/1014-reset-starfive-Add-JH7100-audio-reset-driver.patch

From 91559ced47de9e6fb1e6dd65a5544fcc86dea806 Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Sat, 20 Nov 2021 19:30:49 +0100
Subject: [PATCH 1014/1024] reset: starfive: Add JH7100 audio reset driver

The audio resets are almost identical to the system resets, there are
just fewer of them. So factor out and export a generic probe function,
so most of the reset controller implementation can be shared.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 MAINTAINERS                                   |  2 +-
 drivers/reset/starfive/Kconfig                |  7 ++
 drivers/reset/starfive/Makefile               |  2 +
 .../starfive/reset-starfive-jh7100-audio.c    | 66 +++++++++++++++++++
 .../reset/starfive/reset-starfive-jh7100.h    | 16 +++++
 5 files changed, 92 insertions(+), 1 deletion(-)
 create mode 100644 drivers/reset/starfive/reset-starfive-jh7100-audio.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jh7100.h

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20554,7 +20554,7 @@ STARFIVE JH71X0 RESET CONTROLLER DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 M:	Hal Feng <hal.feng@starfivetech.com>
 S:	Maintained
-F:	Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
+F:	Documentation/devicetree/bindings/reset/starfive,jh7100-*.yaml
 F:	drivers/reset/starfive/reset-starfive-jh71*
 F:	include/dt-bindings/reset/starfive?jh71*.h
 
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -11,6 +11,13 @@ config RESET_STARFIVE_JH7100
 	help
 	  This enables the reset controller driver for the StarFive JH7100 SoC.
 
+config RESET_STARFIVE_JH7100_AUDIO
+	tristate "StarFive JH7100 Audio Reset Driver"
+	depends on RESET_STARFIVE_JH7100
+	default m if SOC_STARFIVE
+	help
+	  This enables the audio reset driver for the StarFive JH7100 SoC.
+
 config RESET_STARFIVE_JH7110
 	bool "StarFive JH7110 Reset Driver"
 	depends on CLK_STARFIVE_JH7110_SYS
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -2,4 +2,6 @@
 obj-$(CONFIG_RESET_STARFIVE_JH71X0)		+= reset-starfive-jh71x0.o
 
 obj-$(CONFIG_RESET_STARFIVE_JH7100)		+= reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_STARFIVE_JH7100_AUDIO)	+= reset-starfive-jh7100-audio.o
+
 obj-$(CONFIG_RESET_STARFIVE_JH7110)		+= reset-starfive-jh7110.o
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7100-audio.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Audio reset driver for the StarFive JH7100 SoC
+ *
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive-jh7100-audio.h>
+
+/* register offsets */
+#define JH7100_AUDRST_ASSERT0	0x00
+#define JH7100_AUDRST_STATUS0	0x04
+
+/*
+ * Writing a 1 to the n'th bit of the ASSERT register asserts
+ * line n, and writing a 0 deasserts the same line.
+ * Most reset lines have their status inverted so a 0 bit in the STATUS
+ * register means the line is asserted and a 1 means it's deasserted. A few
+ * lines don't though, so store the expected value of the status registers when
+ * all lines are asserted.
+ */
+static const u32 jh7100_audrst_asserted[1] = {
+	BIT(JH7100_AUDRST_USB_AXI) |
+	BIT(JH7100_AUDRST_USB_PWRUP_RST_N) |
+	BIT(JH7100_AUDRST_USB_PONRST)
+};
+
+static int jh7100_audrst_probe(struct platform_device *pdev)
+{
+	void __iomem *base = devm_platform_ioremap_resource(pdev, 0);
+
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	return reset_starfive_jh71x0_register(&pdev->dev, pdev->dev.of_node,
+					      base + JH7100_AUDRST_ASSERT0,
+					      base + JH7100_AUDRST_STATUS0,
+					      jh7100_audrst_asserted,
+					      JH7100_AUDRSTN_END,
+					      THIS_MODULE);
+}
+
+static const struct of_device_id jh7100_audrst_dt_ids[] = {
+	{ .compatible = "starfive,jh7100-audrst" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7100_audrst_dt_ids);
+
+static struct platform_driver jh7100_audrst_driver = {
+	.probe = jh7100_audrst_probe,
+	.driver = {
+		.name = "jh7100-reset-audio",
+		.of_match_table = jh7100_audrst_dt_ids,
+	},
+};
+module_platform_driver(jh7100_audrst_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7100 audio reset driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7100.h
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef _RESET_STARFIVE_JH7100_H_
+#define _RESET_STARFIVE_JH7100_H_
+
+#include <linux/platform_device.h>
+
+int reset_starfive_jh7100_generic_probe(struct platform_device *pdev,
+					const u32 *asserted,
+					unsigned int status_offset,
+					unsigned int nr_resets);
+
+#endif