openwrt/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts

191 lines
3.0 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6358.dtsi"
/ {
compatible = "huawei,hg556a-b", "brcm,bcm6358";
model = "Huawei EchoLife HG556a (version B)";
aliases {
led-boot = &power_red;
led-failsafe = &power_red;
led-running = &power_red;
led-upgrade = &power_red;
led-dsl = &dsl_red;
led-internet = &dsl_red;
led-usb = &hspa_red;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
help {
label = "help";
gpios = <&pinctrl 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HELP>;
debounce-interval = <60>;
};
wlan {
label = "wlan";
gpios = <&pinctrl 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
restart {
label = "restart";
gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CONFIG>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "red:message";
gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>;
};
hspa_red: led@1 {
label = "red:hspa";
gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>;
};
dsl_red: led@2 {
label = "red:dsl";
gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
};
power_red: led@3 {
label = "red:power";
gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
};
led@6 {
label = "all";
gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led@12 {
label = "green:lan1";
gpios = <&pinctrl 12 GPIO_ACTIVE_LOW>;
};
led@13 {
label = "red:lan1";
gpios = <&pinctrl 13 GPIO_ACTIVE_LOW>;
};
led@15 {
label = "green:lan2";
gpios = <&pinctrl 15 GPIO_ACTIVE_LOW>;
};
led@22 {
label = "red:lan2";
gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
};
led@23 {
label = "green:lan3";
gpios = <&pinctrl 23 GPIO_ACTIVE_LOW>;
};
led@26 {
label = "red:lan3";
gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
};
led@27 {
label = "green:lan4";
gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
};
led@28 {
label = "red:lan4";
gpios = <&pinctrl 28 GPIO_ACTIVE_LOW>;
};
};
ath9k-fixup {
compatible = "brcm,ath9k-fixup";
reg = <0x30000000 0x8000000>;
pci-dev = <1>;
mtd-mac-address = <&cfe 0x6a0>;
mtd-mac-address-increment = <1>;
ath,eeprom = <&cal_data 0x1e000>;
ath,endian-check;
ath,led-pin = <2>;
ath,led-active-high;
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&pci {
status = "okay";
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
label = "cfe";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xec0000>;
compatible = "brcm,bcm963xx-imagetag";
};
cal_data: partition@ee0000 {
label = "cal_data";
reg = <0xee0000 0x100000>;
read-only;
};
partition@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};