openwrt/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch

From cd909b668132acd6f846336f15abf5185cfc4dbc Mon Sep 17 00:00:00 2001
From: Sebastian Kropatsch <seb-dev@mail.de>
Date: Wed, 12 Jun 2024 22:48:11 +0200
Subject: [PATCH 2/5] arm64: dts: rockchip: Fix regulators, gmac and naming on
 NanoPi R6C/R6S

Fix the alphabetical ordering in some nodes and rename some regulators
and pins to match the schematics [1][2] as well as to adhere to
preferred naming schemes.

In addition to that:
* vcc_3v3_sd_s0: Fix voltage to be 3.3V
* vcc3v3_pcie:
    - Move to NanoPi R6C, this power switch is not available on R6S
    - Fix vin-supply (is vcc_5v0 per schematics)
    - Add gpios/pincrtl to enable power
* vcc5v0_usb: Remove this regulator since according to the schematics,
  vcc5v0_host_20 and vcc5v0_usb_otg0 are directly powered by vcc_5v0
* gmac1: Add rx_delay of 0 (no delay since phy-mode = "rgmii-rxid")
* rgmii_phy1: Add phy-supply as seen in schematics
* pcie2*:
    - Add pinctrl reset pins
    - Update vpcie3v3-supply to match the schematics
* sdhci: Add vmmc-supply and vqmmc-supply

Links:
[1] https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
[2] https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF

Fixes: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
---
 .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi  | 169 +++++++++---------
 .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts  |  28 +++
 .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts  |   5 +
 3 files changed, 122 insertions(+), 80 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -21,7 +21,7 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	adc-keys {
+	adc-key-maskrom {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -41,10 +41,10 @@
 		pinctrl-0 = <&key1_pin>;
 
 		button-user {
-			label = "User";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
 			debounce-interval = <50>;
+			gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "User Button";
+			linux,code = <BTN_1>;
 		};
 	};
 
@@ -80,26 +80,27 @@
 		};
 	};
 
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc_5v0: regulator-vcc-5v0 {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0";
 	};
 
-	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v1_nldo_s3";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <1100000>;
 		regulator-max-microvolt = <1100000>;
-		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_5v0>;
 	};
 
-	vcc_3v3_s0: vcc-3v3-s0-regulator {
+	/* SY6280AAC power switch (U3824 in schematics) */
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-boot-on;
@@ -109,61 +110,45 @@
 		vin-supply = <&vcc_3v3_s3>;
 	};
 
-	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+	vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd_s0_pwr>;
-		regulator-name = "vcc_3v3_sd_s0";
-		regulator-boot-on;
-		regulator-max-microvolt = <3000000>;
-		regulator-min-microvolt = <3000000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_pcie20";
-		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_sd_s0";
 		vin-supply = <&vcc_3v3_s3>;
 	};
 
-	vcc5v0_usb: vcc5v0-usb-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
+	/* SY6280AAC power switch (U9539 in schematics) */
+	/* For USB 2.0 Type-A port */
+	vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&typec5v_pwren>;
-		regulator-name = "vcc5v0_usb_otg0";
+		pinctrl-0 = <&usb_host_pwren_h>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
+		regulator-name = "vcc_5v0_host_20";
+		vin-supply = <&vcc_5v0>;
 	};
 
-	vcc5v0_host_20: vcc5v0-host-20-regulator {
+	/* SY6280AAC power switch (U9538 in schematics) */
+	/* For USB 3.0 Type-A port */
+	vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host20_en>;
-		regulator-name = "vcc5v0_host_20";
+		pinctrl-0 = <&typec5v_pwren_h>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
+		regulator-name = "vcc5v0_usb_otg0";
+		vin-supply = <&vcc_5v0>;
 	};
 };
 
@@ -211,12 +196,13 @@
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy1>;
 	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1_miim
 		     &gmac1_tx_bus2
 		     &gmac1_rx_bus2
 		     &gmac1_rgmii_clk
 		     &gmac1_rgmii_bus>;
-	pinctrl-names = "default";
+	rx_delay = <0x00>;
 	tx_delay = <0x42>;
 	status = "okay";
 };
@@ -230,13 +216,13 @@
 		compatible = "rockchip,rk8602";
 		reg = <0x42>;
 		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <550000>;
 		regulator-max-microvolt = <1050000>;
+		regulator-name = "vdd_cpu_big0_s0";
 		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc_5v0>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -247,13 +233,13 @@
 		compatible = "rockchip,rk8603", "rockchip,rk8602";
 		reg = <0x43>;
 		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <550000>;
 		regulator-max-microvolt = <1050000>;
+		regulator-name = "vdd_cpu_big1_s0";
 		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc_5v0>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -268,13 +254,13 @@
 		compatible = "rockchip,rk8602";
 		reg = <0x42>;
 		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
 		regulator-min-microvolt = <550000>;
 		regulator-max-microvolt = <950000>;
+		regulator-name = "vdd_npu_s0";
 		regulator-ramp-delay = <2300>;
-		regulator-boot-on;
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
+		vin-supply = <&vcc_5v0>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -293,35 +279,43 @@
 		reg = <0x51>;
 		#clock-cells = <0>;
 		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_int>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
 		wakeup-source;
 	};
 };
 
+/* RTL8211F-CG Ethernet */
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
+		phy-supply = <&vcc_3v3_s0>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&rtl8211f_rst>;
+		pinctrl-0 = <&gmac1_rstn_l>;
 		reset-assert-us = <20000>;
 		reset-deassert-us = <100000>;
 		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 	};
 };
 
+/* RTL8125BG Ethernet */
 &pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_1_perstn_m2>;
 	reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
 	status = "okay";
 };
 
+/* R6C: M.2 M-Key socket */
+/* R6S: RTL8125BG Ethernet */
 &pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_2_perstn_m0>;
 	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc_3v3_pcie20>;
 	status = "okay";
 };
 
@@ -360,24 +354,34 @@
 		};
 	};
 
+	pcie {
+		pcie20x1_1_perstn_m2: pcie2x1-1-rst {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie20x1_2_perstn_m0: pcie2x1-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sdmmc {
-		sd_s0_pwr: sd-s0-pwr {
+		sd_s0_pwr: sd-pwr {
 			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb {
-		typec5v_pwren: typec5v-pwren {
+		typec5v_pwren_h: usb3-pwren {
 			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		vcc5v0_host20_en: vcc5v0-host20-en {
+		usb_host_pwren_h: usb2-pwren {
 			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	rtl8211f {
-		rtl8211f_rst: rtl8211f-rst {
+		gmac1_rstn_l: rtl8211f-rst {
 			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -388,15 +392,19 @@
 	status = "okay";
 };
 
+/* eMMC */
 &sdhci {
 	bus-width = <8>;
-	no-sdio;
+	mmc-hs200-1_8v;
 	no-sd;
+	no-sdio;
 	non-removable;
-	mmc-hs200-1_8v;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
 };
 
+/* microSD card */
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -411,16 +419,15 @@
 };
 
 &spi2 {
-	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
 	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-	num-cs = <1>;
+	status = "okay";
 
-	pmic@0 {
+	rk806_single: pmic@0 {
 		compatible = "rockchip,rk806";
-		spi-max-frequency = <1000000>;
 		reg = <0x0>;
 
 		interrupt-parent = <&gpio0>;
@@ -430,23 +437,24 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		spi-max-frequency = <1000000>;
 		system-power-controller;
 
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
+		vcc1-supply = <&vcc_5v0>;
+		vcc2-supply = <&vcc_5v0>;
+		vcc3-supply = <&vcc_5v0>;
+		vcc4-supply = <&vcc_5v0>;
+		vcc5-supply = <&vcc_5v0>;
+		vcc6-supply = <&vcc_5v0>;
+		vcc7-supply = <&vcc_5v0>;
+		vcc8-supply = <&vcc_5v0>;
+		vcc9-supply = <&vcc_5v0>;
+		vcc10-supply = <&vcc_5v0>;
 		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc_5v0>;
 		vcc13-supply = <&vcc_1v1_nldo_s3>;
 		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
+		vcca-supply = <&vcc_5v0>;
 
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -745,10 +753,11 @@
 };
 
 &u2phy2_host {
-	phy-supply = <&vcc5v0_host_20>;
+	phy-supply = <&vcc_5v0_host_20>;
 	status = "okay";
 };
 
+/* Debug UART */
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
@@ -7,8 +7,36 @@
 / {
 	model = "FriendlyElec NanoPi R6C";
 	compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
+
+	/* MP2143DJ power switch (U9536 in schematics) */
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie20x1_2_con_pwren>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_pcie";
+		vin-supply = <&vcc_5v0>;
+	};
 };
 
 &lan2_led {
 	label = "user_led";
 };
+
+/* M.2 M-Key socket */
+&pcie2x1l2 {
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+};
+
+&pinctrl {
+	pcie {
+		pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
+			rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
@@ -12,3 +12,8 @@
 &lan2_led {
 	label = "lan2_led";
 };
+
+/* RTL8125BG Ethernet */
+&pcie2x1l2 {
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+};