openwrt/target/linux/bmips/dts/bcm6368-comtrend-vr-3025un.dts

183 lines
2.7 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6368.dtsi"
/ {
model = "Comtrend VR-3025un";
compatible = "comtrend,vr-3025un", "brcm,bcm6368";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led@2 {
label = "green:dsl";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led@5 {
label = "green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
led_power_green: led@22 {
label = "green:power";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
led_power_red: led@24 {
label = "red:power";
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led@31 {
label = "red:internet";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
bcm43222-sprom {
compatible = "brcm,ssb-sprom";
pci-bus = <0>;
pci-dev = <1>;
nvmem-cells = <&macaddr_cfe_6a0>;
nvmem-cell-names = "mac-address";
mac-address-increment = <1>;
brcm,sprom = "brcm/bcm43222-sprom.bin";
brcm,sprom-fixups = <97 0xfeb3>,
<98 0x1618>,
<99 0xfab0>,
<113 0xfed1>,
<114 0x1609>,
<115 0xfad9>;
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0>;
nvmem-cell-names = "mac-address";
};
&ohci {
status = "okay";
};
&pci {
status = "okay";
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
partition@20000 {
compatible = "brcm,bcm963xx-imagetag";
label = "firmware";
reg = <0x010000 0x7e0000>;
};
partition@1fe0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ephy0_led &pinctrl_ephy1_led
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
};
&switch0 {
ports {
port@0 {
reg = <0>;
label = "lan1";
phy-handle = <&phy1>;
phy-mode = "mii";
};
port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&phy2>;
phy-mode = "mii";
};
port@2 {
reg = <2>;
label = "lan3";
phy-handle = <&phy3>;
phy-mode = "mii";
};
port@3 {
reg = <3>;
label = "iptv";
phy-handle = <&phy4>;
phy-mode = "mii";
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};
&cfe {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
reg = <0x6a0 0x6>;
};
};