openwrt/target/linux/airoha/Makefile

include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=airoha
BOARDNAME:=Airoha ARM
SUBTARGETS:=en7523
FEATURES:=dt squashfs nand ramdisk gpio source-only

KERNEL_PATCHVER:=6.6

include $(INCLUDE_DIR)/target.mk

$(eval $(call BuildTarget))
airoha: Add new target platform Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> 2022-08-03 15:31:03 +00:00			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=airoha`
			`BOARDNAME:=Airoha ARM`
airoha: move en7523 in dedicated subtarget In preparation for EN7581 SoC support, move en7523 in dedicated subtarget. This is needed as EN7581 is now 64bit but en7523 is 32bit hence have very different kernel config. Also rename patch to a more friendly number sequence. Link: https://github.com/openwrt/openwrt/pull/16730 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> 2024-10-17 13:42:51 +00:00			`SUBTARGETS:=en7523`
airoha: Add new target platform Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> 2022-08-03 15:31:03 +00:00			`FEATURES:=dt squashfs nand ramdisk gpio source-only`

airoha: default to kernel 6.6 Move airoha do kernel 6.6 as the default. Link: https://github.com/openwrt/openwrt/pull/15630 Signed-off-by: Robert Marko <robimarko@gmail.com> 2024-06-04 20:44:53 +00:00			`KERNEL_PATCHVER:=6.6`
airoha: Add new target platform Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> 2022-08-03 15:31:03 +00:00
			`include $(INCLUDE_DIR)/target.mk`

			`$(eval $(call BuildTarget))`