openwrt/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi

208 lines
3.2 KiB
Plaintext
Raw Normal View History

2019-04-09 05:48:31 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
2019-04-09 05:48:31 +00:00
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac1;
2019-04-09 05:48:31 +00:00
};
leds {
compatible = "gpio-leds";
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
2019-04-09 05:48:31 +00:00
};
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
2019-04-09 05:48:31 +00:00
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
2019-04-09 05:48:31 +00:00
linux,code = <KEY_RESTART>;
};
repeater {
label = "repeater";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
2019-04-09 05:48:31 +00:00
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
2019-04-09 05:48:31 +00:00
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
status = "okay";
mediatek,bbt;
mediatek,bmt-remap-range =
<0x0000000 0x0800000>,
<0x3600000 0x4980000>;
2019-04-09 05:48:31 +00:00
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0100000>;
read-only;
};
factory: partition@200000 {
label = "factory";
reg = <0x0200000 0x0100000>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};
2019-04-09 05:48:31 +00:00
};
partition@300000 {
label = "SecondBoot";
reg = <0x0300000 0x0100000>;
read-only;
};
partition@400000 {
label = "kernel";
reg = <0x0400000 0x0400000>;
};
partition@800000 {
label = "ubi";
reg = <0x0800000 0x2e00000>;
};
partition@3600000 {
label = "Config";
reg = <0x3600000 0x0100000>;
read-only;
};
partition@3700000 {
label = "firmware_2";
reg = <0x3700000 0x3200000>;
};
partition@6900000 {
label = "Config_2";
reg = <0x6900000 0x0100000>;
read-only;
};
partition@6a00000 {
label = "persist";
reg = <0x6a00000 0x0100000>;
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
2019-04-09 05:48:31 +00:00
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
port@4 {
status = "okay";
label = "lan1";
};
};
};
2019-04-09 05:48:31 +00:00
&pcie {
status = "okay";
};
&state_default {
gpio {
groups = "uart2", "uart3", "wdt";
function = "gpio";
2019-04-09 05:48:31 +00:00
};
};
&xhci {
status = "disabled";
};