ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 17:01:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
cc07d1d2fd
openwrt/target/linux/bmips/image/bcm63xx_nand.mk

103 lines
3.1 KiB
Makefile
Raw Normal View History

bmips: add new target This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-21 09:00:18 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
DEVICE_VARS += CFE_RAM_FILE
DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
DEVICE_VARS += SERCOMM_PID SERCOMM_VERSION
# CFE expects a single JFFS2 partition with cferam and kernel. However,
# it's possible to fool CFE into properly loading both cferam and kernel
# from two different JFFS2 partitions by adding dummy files (see
# cfe-jffs2-cferam and cfe-jffs2-kernel).
# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
# JFFS2 partition, which is much safer in case anything goes wrong.
define Device/bcm63xx-nand
FILESYSTEMS := squashfs ubifs
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
KERNEL_INITRAMFS_SUFFIX := .elf
IMAGES := cfe.bin sysupgrade.bin
IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |\
cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL_SIZE := 5120k
CFE_PART_FLAGS :=
CFE_PART_ID :=
CFE_RAM_FILE :=
CFE_RAM_JFFS2_NAME :=
CFE_RAM_JFFS2_PAD :=
CFE_WFI_VERSION :=
CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
CFE_WFI_FLASH_TYPE :=
CFE_WFI_FLAGS :=
UBINIZE_OPTS := -E 5
DEVICE_PACKAGES += nand-utils
endef
define Device/sercomm-nand
$(Device/bcm63xx-nand)
IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\
cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
SERCOM_PID :=
SERCOMM_VERSION :=
endef
define Device/comtrend_vr-3032u
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VR-3032u
CHIP_ID := 63268
SOC := bcm63168
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
CFE_WFI_VERSION := 0x5732
endef
TARGET_DEVICES += comtrend_vr-3032u
bmips: add Huawei HG253s v2 support Huawei HG253s v2 is a BCM6362 with 128M RAM, internal wifi and external BCM53124S switch. This device is already supported in bcm63xx target, so more information can be found in https://openwrt.org/toh/huawei/hg253s_v2. It's a perfect example of a device with internal and external switch coexistance since most devices only have ports on one of the switches but not both of them. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-03-19 17:17:29 +00:00
define Device/huawei_hg253s-v2
$(Device/bcm63xx-nand)
IMAGES := flash.bin sysupgrade.bin
IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
DEVICE_VENDOR := Huawei
DEVICE_MODEL := HG253s
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_PART_FLAGS := 1
CFE_PART_ID := 0x0001EFEE
CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += huawei_hg253s-v2
bmips: add new target This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-21 09:00:18 +00:00
define Device/netgear_dgnd3700-v2
$(Device/bcm63xx-nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGND3700
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
CFE_RAM_JFFS2_NAME := cferam
CFE_RAM_JFFS2_PAD := 496k
BLOCKSIZE := 16k
PAGESIZE := 512
bmips: add wifi packages for supported devices Netgear DGND3700v2 / Comtrend VR-3032u internal wireless not supported. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-23 19:23:47 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) $(B43_PACKAGES)
bmips: add new target This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-21 09:00:18 +00:00
CFE_WFI_FLASH_TYPE := 2
CFE_WFI_VERSION := 0x5731
endef
TARGET_DEVICES += netgear_dgnd3700-v2
Reference in New Issue Copy Permalink